Workshop Tour | Woodworking Machine Rundown of My New Shop

Рет қаралды 27,104

Күн бұрын

I thought I'd make something a bit different to usual and give you a tour of my new workshop. We moved in over Christmas time and are now starting to get everything finalised so I thought it might be of interest to share the setup I now have.
I hope you enjoy and if you have any questions just pop them in the comments below and I will do my best to answer them.
- Machine List -
Jet JDP-17 Pillar Drill
Three Phase Wood Chipper
P&J Dust Extractor
Falach 50 Briquette Press
Axminster 610 Dual Drum Sander
Wadkin FM24 Planer Thicknesser
Wadkin SP12 Panel Saw
Jet OES-80 Belt Sander
Jet JOSS-S Bobbin Sander
Unosand Multi 140 Brush Sander
Ceamax CNC Router
Festool Router Table with OF2200 Router
Festool Kapex KS120 Chop Saw
Mirka CEROS Sander
Minimax T124 Copying Lathe
- Website -
danleeboatbuilding.co.uk
- Facebook -
/ danleeboatbuilding
- Instagram -
/ danleeboatbuilding

Пікірлер: 35

@shanlaylausai3520 8 ай бұрын

Thankfully for your sharing knowledge

@carpentryjoineryandcabinet6335 4 жыл бұрын

Really nicely laid out and thought out space man, nothing better than having a nosey around someone else's workshop! The briquette set up is awesome 👍👍

@anirishwoodworkersdiary2137 4 жыл бұрын

Best of luck with your new workshop it’s very well layed out

@caseydixon8714 4 жыл бұрын

The extraction, recycling set up is really cool man. Fire Wood bricks is a great idea to repurpose off cuts

@DanLeeBoatbuilding 4 жыл бұрын

It's a very handy set up, oak dust in particular is difficult to get rid of any other way and we had to put it all in landfill before. This is a much better way for sure!

@DIYMinded 4 жыл бұрын

Nice shop! Thanks for the tour. Dust collection into pellets has to be the best idea ever. Subbed.

@DanLeeBoatbuilding 4 жыл бұрын

Cheers and thanks for the sub!

@feralfabrications2465 4 жыл бұрын

Looking tidy & well setup Dan. You've certainly got some nice gear.

@DanLeeBoatbuilding 4 жыл бұрын

Cheers, it's taken a while to get it all refined!

@bonafideadventures8425 4 жыл бұрын

I give this workshop a 9.9 out of 10 because it could only be a 10 out of 10 if it was mine thanks for the tour

@DanLeeBoatbuilding 4 жыл бұрын

😆

@markpalmer5311 4 жыл бұрын

Very interesting, and really like the offcut collection and pellet processing system. Really looking forward to the new series coming up. And Happy Easter from Texas!

@DanLeeBoatbuilding 4 жыл бұрын

Happy Easter to you too! I am spending my lock down time getting some older footage finally edited and uploaded as well so I've got a few more things in the pipeline. As soon as I can get the boat up to the workshop progress should continue!

@reeddylan9294 3 жыл бұрын

This is an incredible worth for money [Link t.co/SGIXIPXR0z ]. I have been looking for something like this for quite a while now. I'm happy there are opportunities like this out there. This woodwork plan made a clear presentation with regards to building sheds. Much thanks to you.?

@scasey1960 3 жыл бұрын

Great job on the boat.

@DanLeeBoatbuilding 3 жыл бұрын

Thanks 👍

@mswoodcustomwoodwork 4 жыл бұрын

Fantastic layout - I learned a lot. Really insightful. Thanks heaps

@markrussell9719 4 жыл бұрын

Great shop - just subscribed. I have just bought the same saw would be good to see a video on yours.

@DanLeeBoatbuilding 4 жыл бұрын

Cheers! Which saw, the Wadkin or the Festool? I'm not very knowledgeable on the Wadkin and mostly use it as a rip saw really.

@markrussell9719 4 жыл бұрын

Dan Lee Hi Dan - Yes just bought the Wadkin but haven’t installed or used it yet as new workshop still being built but would be good to know more about it. Thanks

@robertalexander6637 3 жыл бұрын

Dan you are obviously a Joiner and Cabinet Maker like me as i have a lot of the gear you have . I have a spindle molder by Robland which is a handy bit of kit which i use alot on my boat building projects . I am lucky i am retired and devote most of my time in my workshop playing with boats . Like your setup but i think you need a bit more space for your boat building area. Cheers Rob.

@DanLeeBoatbuilding 3 жыл бұрын

Hi Rob I've not found a need for a spindle moulder to date but then I've never really used them so perhaps I don't know what I'm missing out on. There is never enough room for boat building but then the bigger the space you have the bigger the boats will get!

@Loop307 3 жыл бұрын

Where would I find one of them Burket cat makers

@xavierhackenbeck8182 3 жыл бұрын

Does the MDF or particle board dust affect the quality of the briquettes? Also, if you ever get tired of the second Kapex laying around, I could always help you and take it off your hands...

@DanLeeBoatbuilding 3 жыл бұрын

MDF and fine sanding dust still press fine. They make a much more dense briquette but still work well. I'll let you know if a Kapex is going spare, I like them too much at the moment though 😄

@chrisgardner3606 Жыл бұрын

Boat building shop? Do you have another shed where you keep the bandsaw and build the boats? Sorry! 1st video I watched. Looks like all your curves are done on the router. Do you do any bevels? By hand plane? All your shapes done in CAD instead of your hands and knees on the loft floor?

@DanLeeBoatbuilding Жыл бұрын

No, this is it for now, I do work on mostly small boats though. The layout of the workshop has changed a bit since this video. I have a bandsaw now, most bevelling is done by hand. Not much traditional lofting gets done here, I haven't started a new build yet but when I do all framing will be CNC cut.