Workshop Trolly that holds Bosch L-boxxes

Рет қаралды 88,794

5 жыл бұрын

I made a Workshop trolly that fits my Bosch L-boxxes
The Boxes i use are called l-boxx and they come in 4 different sizes. This trolly uses the small (102) and medium (136)
l-boxxes :
Small : amzn.to/2HSlXxu
Medium : amzn.to/37XiGr8
Large : amzn.to/2STHT1v
X Large : amzn.to/37XkujU
Update: I switched from the dowel pins to 3d printed locking brackets. You can download them for free here: www.thingiverse.com/thing:223...
Music by Joakim Karud / joakimkarud

Пікірлер: 55

@motosandphotos 3 жыл бұрын

That lock mechanism was genius! Great work

@ahmetgure1506 27 күн бұрын

Bosch toolbox working with Dewalt tools, so meanful :) Nice work, thanks for share..

@KyleJamieson 3 жыл бұрын

I know this is an older vid of yours, but I just bought one of those DeWalt multitools for an unrelated project and jumped for joy when I saw you using one here!

@carterp2858 4 жыл бұрын

Dude that thing is amazing, got the perfect place for it in my shop.

@loopinnerthe 3 жыл бұрын

In the future you will add a block of concrete at the back to stop it tipping over forwards. In the future perhaps you might reprise that locking mechanism as it was so clever and geometric and funky and .......easy to break into!

@bencarr7334 5 жыл бұрын

Love that locking mechanism!

@hinkleaj1 3 жыл бұрын

Clever. Love the locking mechanism.

@dudemcmann6936 3 жыл бұрын

Pretty awesome build. Looks like your shop Is in a similar neighborhood to mine. Even though I keep the shop locked, I have my big toolbox locked too, but haven't yet built a box like this for my L-boxxes. Thanks for the ideas.

@justinbm64 5 жыл бұрын

I appreciate your work Alexandre!

@achappel 5 жыл бұрын

justinbm64 thanks man!

@CrazyWorkshop 5 жыл бұрын

Cool workshop!!!

@marcohaefner1644 4 жыл бұрын

Man oh man. Great idea!

@DerYouHoff 5 жыл бұрын

Nice to see you're back!! Keep up the good work!!

@achappel 5 жыл бұрын

Steffen Diekhoff thanks man! Much more to come soon :)

@rasmuskurten8455 4 жыл бұрын

Great features! Nice work - appreciate all your videos! Keep it up 💪

@harenbabu9496 4 жыл бұрын

Your ideas and work are awsome

@cavemanvi 5 жыл бұрын

Dude so I was watching this on my switch and I had to go downstairs and get my phone so I could comment. NICE TO SEE YOU BACK. HIPHOPINSTRUMENTALS + WOODWORKING 👌👌👌👌

@alsanova 5 жыл бұрын

That's a neat locking strip 👍👌

@achappel 5 жыл бұрын

Ali Salih thanks :)

@JRSkola 3 жыл бұрын

Probably should have just used a similar knob without the key, or leave the key in it I guess!

@leobardoliraverdugo5982 5 жыл бұрын

Que increíble habilidad e ingenio Alex me encantó 👍👍👍

@marcocavallo4156 3 жыл бұрын

If I were to rob your workshop, i'd take the nice trolley too.. :) Nice work!

@annaprzewoznik9820 5 жыл бұрын

Sooooo talented 😮

@achappel 5 жыл бұрын

🐶

@caetanobarreira 4 жыл бұрын

Very Nice Indeed!

@JEAN-me1yt 5 жыл бұрын

Salut Alexendre super la réalisation pour L-BOXX

@Zachary3DPrints 3 жыл бұрын

Genius!

@markadamarnold 4 жыл бұрын

Great work and ideas...do you think that thinner plywood will sag over time if the l-boxes are loaded down with heavier items?

@inod5656 2 жыл бұрын

great idea to mount the anti theft bar with hexagon screws. where would a potential thief find a hexagon screw driver inside of a fully equiped worksho... oh

@xferme 4 жыл бұрын

Made the trolley for Bosch boxes with DeWalt power tools :D

@planespeaking 3 жыл бұрын

This would be so much better with decent draw runners and slightly thicker bases

@allistertowndrow8986 4 жыл бұрын

Hey Alex! What WorkPants Are You Using? They look Fantastic

@basvanhemert492 3 жыл бұрын

Hey Alexandre, you said you would share the building plans for this cart. I don't see the link?

@Kianrui 3 жыл бұрын

Should I choose Milwaukee packout, Bosch l box or DeWalt tough system??

@tc9148 4 жыл бұрын

Could you provide some dimensions for the plywood used, the cabinet and drawer slide vertical spacing? What brand and model number are the full extension drawer slides? Terrific work, best I’ve seen.

@achappel 4 жыл бұрын

Thanks man :) I'll try my best to make some drawings for the project! I'll let you know when they are available ;)

@tc9148 4 жыл бұрын

Alexandre Chappel So nice of you to offer to make drawings. Just some simple dimensions would suffice - width, length and thickness of shelves, spacing of shelves, specific drawer slides used and inside width and depth of cabinet. That would save a lot of time and experimenting to find those critical dimensions. Love your work.

@basvanhemert492 3 жыл бұрын

@@achappel Would also greatly appreciate these. :)

@Fekillix 4 жыл бұрын

Nevermind, I just saw your description update! If you have access to a 3D printer you should be printing a small baseplate that allows the l-boxxes to latch onto your base drawer plate. Here is the STL file: www.stlfinder.com/model/sortimo-l-boxx-clip/2944106/

@salvatoresalvio204 4 жыл бұрын

OTTIMO. COMPLIMENTI SALUTI SALVIO

@jackdmills 3 жыл бұрын

I love the concept but the locking mechanism isn’t going to stand up to much with the l boxxs only being held in with thin dowel

@arknet01 2 жыл бұрын

Hi! I would like to ask if what is the exact name of your drill bit to your impact drill

@fabulousfred87 3 жыл бұрын

neeeeeeeeeeeeeeeeeeeeeeeed!!!!

@danielmunch9568 4 жыл бұрын

Dude is this an Altendorf table saw? Whats with your old Felder one?

@achappel 4 жыл бұрын

Daniel Münch i wish! Hehe, no this one I can't remember what is, nothing as fancy as an altendorf. This video is from the previous workshop i rented a space at. So the Felder is the one that I currently own. They had an altendorf in the school I studied at, I think I use it in the moneycan or razor video :)