World's Most Powerful Pancake Slayer Tesla Coil? (Melts Copper)

Рет қаралды 94,453

4 жыл бұрын

Stay safe, at nordvpn.com/plasmachannel & use code plasmachannel to get 70% off a 3-year plan and an extra month for free.
A simpler cousin of the Tesla Coil, is the Slayer Exciter. It's an incredibly simple circuit, that makes thousands of volts, and can produce spectacular results. But this one, is a bit different! I couldn't find a flat, pancake style slayer anywhere - so this was my attempt at making one of the first on KZfaq. I was blown away by the results. #PlasmaNation #TeslaCoil #Maker
**LINKS TO ALL PARTS USED, ARE AT VERY BOTTOM OF THIS**
Plasma Channel Patreon: / plasmachannel
Plasma Channel Twitter: / channelplasma
Plasma Channel Facebook: PlasmaChanne...
Instagram: Plasma_Channel_Official
Music beginning in beginning:
Track: Dirty Palm - To The Back (feat. Purple Velvet Curtains)[NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Dirty Palm - To The Ba...
Free Download / Stream: ncs.io/ToTheBack
Background music 1:
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/2Pj0MtT
Music released by Argofox • A Himitsu - Adventures...
Music promoted by Audio Library • Adventures - A Himitsu...
Background music 2
Track: NIVIRO - Flares [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • NIVIRO - Flares | Hous...
Free Download / Stream: ncs.io/FlaresYO
Intro screen music:
Track: Summer Was Fun & Laura Brehm - Prism [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Summer Was Fun & Laura...
Free Download / Stream: ncs.io/PrismID
Background music during 4 experiments
Track: Jonny Koch & Annie Sollange - LOVE ME [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jonny Koch & Annie Sol...
Free Download / Stream: ncs.io/LOVEME
Play the LOVE ME game: dontyouloveme.com
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/?r...
DO NOT attempt to repeat my demonstrations, without prior knowledge of electrical or fire safety. I do not hold responsibility or liability for damage or injury incurred by copying results seen in my videos. High voltage is not for those new to electricity!
****PARTS USED****
Transistor (buy in bulk!): amzn.to/2Wp4FjU
Resistor: amzn.to/2U2n2d3
LED / Diode: amzn.to/2QmxxVZ
Wire for secondary: amzn.to/2Wm9cDH
Wire for primary: amzn.to/2WtWnHk
Acrylic: amzn.to/33vDsh8
Battery: amzn.to/2xIp8FX

Пікірлер: 547

@PlasmaChannel 4 жыл бұрын

I honestly support this sponsor - it's an amazing service. Check out NordVPN: nordvpn.com/plasmachannel or use code plasmachannel to get 70% off a 3 year plan plus 1 additional month free. Stay safe, and browse safer!

@coler154 3 жыл бұрын

PIA vpn is better

@numatechprototypes222 3 жыл бұрын

pancake coil nice and compact I love it now I need to build one with a 10;1000turn insulated that can handle 30-200kv 1.6kw input I need to get a replacement voltage booster for my zvs I sadly blew it out years ago be for i got into fusion. ill have to do spark gapped with my hv supply I have then see how my plasma chamber handles it. now x-ray glasses on, welding mask down, lead /aluminum positive charge shield up. battery charged, materials gathering, rebuilding capacitor's, coiling wire.......................................................ugh , installing prototype core Fxsit, vacuum system on, battery charged ,high voltage supply on, charge capacitors, prepping fuel intake, filtration system on, fuel system on, shield on, lights off, system is all green....3..2...1..... man I cant wait to see that beautiful fusion glow again but with more power ok I need to get back to winding this coil.. ugh I wont get to see full output till I get the voltage booster replaced.

@integza 4 жыл бұрын

Electricity and Pancakes. Love it!

@PlasmaChannel 4 жыл бұрын

The best! Almost as epic as a cigarette bouquet....some might say....

@Antno 4 жыл бұрын

@@PlasmaChannel yes I saw that video

@Antno 4 жыл бұрын

@@PlasmaChannel yes I saw that video

@darekmario446 4 жыл бұрын

Did you know that im here because ure here? :D

@marko-tapioautio413 4 жыл бұрын

@@PlasmaChannel kzfaq.info/get/bejne/q9F8ZKyZyJ_OoGw.html&t=152&fbclid=IwAR3ort7D2BOmMjg4SmMsVAnR0VJAaH-Ug7mWchaXz0FqS6JguiD_sVFngKw

@nigel-matthews 4 жыл бұрын

That's freaking awesome man! Never seen anything quite like that - you're very creative 👌 That secondary looks challenging to wind. Looking forward to attempting this build!

@PlasmaChannel 4 жыл бұрын

Nigel, I appreciate that. Yeah winding the secondary wasn’t TOO hard... use a thin washer in the middle of the two discs to space the secondary... and attach the wire to the bolt in the middle, then wind on a drill. First attempt though I broke the wire...

@phenethylamine21 4 жыл бұрын

@@PlasmaChannel how many turns on secondary and primary?

@phenethylamine21 4 жыл бұрын

Will you make a video how to make this?

@gabrielgarcia2496 4 жыл бұрын

@@phenethylamine21 he kinda did.

@francescotiboni397 4 жыл бұрын

I love your channel, because I REALLY started understanding electronics when I built my first tesla coil... So I like arcs and sparks, and this is the perfect place to watch them. Thanks for all your project!!

@PlasmaChannel 4 жыл бұрын

Very cool! Yeah, a tesla coil is what got me into electronics as well. Cheers!

@ehof03 4 жыл бұрын

it's so cool. can't wait for the next video

@camilomartinez3925 3 жыл бұрын

Finally I found a good KZfaq chanel

@mwilson14 4 жыл бұрын

This suits a great purpose I need for the project I reached out to you about.

@3DLearningResources 4 жыл бұрын

The concept and the design is really good . Thanks Jay !

@PlasmaChannel 4 жыл бұрын

Thank you, I appreciate that.

@samns3626 4 жыл бұрын

Love u dude !!!!!!! Excited all the time to see new videos!!!

@PlasmaChannel 4 жыл бұрын

More to come! I really appreciate your support.

@kentherapy7022 4 жыл бұрын

Your videos look like world-class professional ads. I estimate that you work as an actor in an advertising agency. But you have the ability to do a complete turnkey advertising. Thank you for not wasting visitors time. Compared to many other technical channels.

@PlasmaChannel 4 жыл бұрын

Hi Ken, I appreciate your compliments. Nope, don’t work in advertising. I spent several years as a television actor though, so, always seeing how professional camera shots look... I now always strive to mimic professional quality with my own videos. My goal is to make me videos even more professional and entertaining in time.

@kentherapy7022 4 жыл бұрын

@@PlasmaChannel Everything is good enough as it is at the same time. All I would recommend: Try to make smaller gestures and reduce the intensity of acting. But I only estimate by 20%. It's just my feeling and just the opinion of one person. Nothing more.

@PlasmaChannel 4 жыл бұрын

Ken Therapy thanks for the input, really. Means a lot. I do struggle with too many hand gestures, admittedly. Been trying to reduce it slightly!

@kentherapy7022 4 жыл бұрын

@@PlasmaChannel Thanks for agreeing. Classical theater requires greater gestures and expressive facial facial expression. But technical video, moreover, in high quality not. Because your face can be zoomed in as you need. This is not possible on the theater boards. All you need is a soft gentle face game. The same applies to hand and body language. You are similar man a like the Mentalist serial. You can try his type of actering.

@JejetRC 2 жыл бұрын

I was having trouble with this circuit and this video helped clear it up a little bit. I started over,and it works!

@vasundarasrinivasan4018 3 ай бұрын

Hi do you have the circuit diagram?

@PlasmaChannel 3 ай бұрын

@vasundarasrinivasan4018 the diagram is in the video. Cheers

@mohsenaghdam3136 4 жыл бұрын

This is absolutely beautiful device ,you always design cool stuff ,and video is looking so cool 💜💜💜💜

@PlasmaChannel 4 жыл бұрын

Hi Mohsen, thank you so much.

@jammyjaime 4 жыл бұрын

You’re a very good presenter, I’m surprised you’re into something so specific, but it’s great 👍

@johniovine3956 4 жыл бұрын

Nice job.

@PlasmaChannel 4 жыл бұрын

Thank you, John!

@Nono-hk3is 4 жыл бұрын

Nice design, and your build quality is beautiful as always!

@PlasmaChannel 4 жыл бұрын

Thank you very much! I'm building a much, MUCH larger one now!

@matthewcampbell7153 4 жыл бұрын

@@PlasmaChannel hope to see that as a project.

@gogo311 4 жыл бұрын

Loved it! :) Do you need special transistors for this to handle such high frequencies? When I did this with a single transistor, it overheated too quickly.

@david_serum 4 жыл бұрын

Cool stuff 😁

@eliastassani-prell5242 4 жыл бұрын

Once again a great video👍🏼

@PlasmaChannel 4 жыл бұрын

Appreciate that, thanks!

@krishnakarmarkar9354 3 жыл бұрын

I like your all videos

@tf3confirmedbuthv54 4 жыл бұрын

I’d love to see more SSTC videos! I’ve been getting into Tesla coils recently and have made 3 simple SGTCs, maybe do a video on a simple musical coil? Anyways, your content is great, no matter what it is, have a good one!

@PlasmaChannel 4 жыл бұрын

Coming soon! And thank you so much for your kind words. I'm a big fan of spark gap coils......but I do like the clean nature of the solid state form!

@sef2273 4 жыл бұрын

4:34 you are the man so glad to see the human experiment done haha..

@PlasmaChannel 4 жыл бұрын

For science

@freekingawwsome 4 жыл бұрын

Your video was awsome . Hope to see more of your ideas 😉

@PlasmaChannel 4 жыл бұрын

More to come! Thanks

@cisarvialpando7412 4 жыл бұрын

Wow super cool idea to make the secondary coil pancake type💯💯 You are king of creativity... One day you will sure built something that will shock the world...🔥🔥🔥

@PlasmaChannel 4 жыл бұрын

Maybe one day! I have some big builds planned.

@daveandrews6670 3 жыл бұрын

This is a great idea, it's perfect for a project I want to do. But must build my first Tesla coil first, am a beginner. Thanks and cheers

@Akiracademy 4 жыл бұрын

This looks awesome!!!! i wanna try building it.

@PlasmaChannel 4 жыл бұрын

Go for it!

@didakpram2975 3 жыл бұрын

I love this one👍👍👍

@coolnegative 4 жыл бұрын

Love your videos my friend.

@michaelmitchell8218 4 жыл бұрын

Great to see you back with more wonderful stuff. We just love high voltage. Boys dangerous toys lol. Love your work.

@PlasmaChannel 4 жыл бұрын

Thanks Michael!

@FIXDIY 4 жыл бұрын

Amazing

@acdega263 4 жыл бұрын

Very interesing. 10/10 :D

@stuartcommon4651 4 жыл бұрын

I'd just been looking at the drsstc pcb tesla but due to self isolation can't get out to make one. I'd never thought about just winding it like this rather than etching the coils on pcb. I salute you good sir!

@PlasmaChannel 4 жыл бұрын

Hi Stuart - thanks for the kind words. The winding was very tricky, but worked out well! All about the drill.

@FantaBH 3 жыл бұрын

as usual great video.

@PlasmaChannel 3 жыл бұрын

Thank you!

@ansonvattakunnel5297 4 жыл бұрын

Super Awesome video

@PlasmaChannel 4 жыл бұрын

Thank you so much 😀

@hotpeper2692 4 жыл бұрын

Hey love your videos keep it up bro ❤️❤️❤️❤️❤️❤️

@PlasmaChannel 4 жыл бұрын

Thanks! Will do!

@arc_channel_yt 4 жыл бұрын

The real question is how you wind?

@mykulpierce 4 жыл бұрын

Creating a jig is usually the easiest way.

@PlasmaChannel 4 жыл бұрын

Created a jig on a drill. Was very difficult and the first time my jig failed.....and 400 feet of wire unravelled and tangled. Second time came out great!

@arc_channel_yt 4 жыл бұрын

@@PlasmaChannel very nice thanks for answer

@sFeral 4 жыл бұрын

@@PlasmaChannel try stacking multiple layers, that will also allow you to try multiple primaries (between the layers, wired in parallel)

@sFeral 4 жыл бұрын

@@mykulpierce Current goes outward then inward, similar to a bifilar only shifted in the z axis, and he can also make another variant by flipping the second layer in the x or y axis, making the current wind in the same direction on every layer.

@Antno 4 жыл бұрын

Cool very nice Jay

@Antno 4 жыл бұрын

Yay thanks for likeing my comment maybe one day when I'm able to get the right parts I will build one

@matthewcampbell7153 4 жыл бұрын

Hi Jay... can I ask.... regarding the secondary, are the windings in-line or simple wound into the former?

@atomicmelonz5918 4 жыл бұрын

Nice video!

@PlasmaChannel 4 жыл бұрын

Thanks!

@rubaiyatmehedi9337 4 жыл бұрын

The production quality😘😘

@PlasmaChannel 4 жыл бұрын

You like it?

@rubaiyatmehedi9337 4 жыл бұрын

@@PlasmaChannel loved it. Actually planning to build this one

@XETECH 4 жыл бұрын

Always awesome..... Thanks you sir I am your lovely student..❤️❤️❤️❤️

@michakisielewski4898 4 жыл бұрын

Very good and interesting video, thanks

@PlasmaChannel 4 жыл бұрын

Glad you enjoyed it, thank you for watching!

@rpgiacon 2 жыл бұрын

Sweet seeet sparks! I have one od those 6 inches tube color tvs and i was planing to make a poors man osciloscope once i cant buy one, but once it will be poor quality you think it is a good material to make a high voltage project or better to use a bit tube tv one to it?

@MasterIvo 3 жыл бұрын

I like how you showed the electric field. Pancake coils, I love them. Personally I always use bifilar pancake coils as they have a lower resonant frequency and can hold much more energy in its fields.

@PlasmaChannel 3 жыл бұрын

Thanks Ivo. Are you able to create larger sparks at same voltage input, using bifilar?

@MasterIvo 3 жыл бұрын

@@PlasmaChannel Yes a bifilar coil can produce larger sparks, as the capacity of the coil is charged to a much higher voltage (more energy). you just need to be careful for sparkover between the windings, as the voltage difference between them is much higher. I don't generate sparks, as I see it as an entertaining waste of energy. instead I reuse the energy.

@mihalyhorvath2617 4 жыл бұрын

Wow so cool

@aaronc6416 2 жыл бұрын

Looks good,is your L1 quarter wave of your L2? And at what frequency does plasma turn green?

@All_Science 4 жыл бұрын

these solid state coils are very cool! I've been perfecting my drsstc for the better part of a year and with a variable interrupter you can get some nice sounds and sparks. also with a bit of modifications like a mosfet driving ic you can replace the bjt with a n-channel fet that can much more power. electroboom has a great schematic in his video about the topic

@davemwangi05 4 жыл бұрын

Let's see a vid of that.

@PlasmaChannel 4 жыл бұрын

I agree!

@All_Science 4 жыл бұрын

@@davemwangi05 working on it, should be out soon

@charlesvanneste2834 3 жыл бұрын

I have found that adding a diode from the gate to drain (using a mosfet) with the cathode connected to the drain, greatly improves these circuits. At least with helical coils, might work with this one.

@stephshighvoltagelab 4 жыл бұрын

Love it!

@PlasmaChannel 4 жыл бұрын

Thanks!!

@matthewcampbell7153 3 жыл бұрын

Hi Jay.... may I ask, what value resistor are you using in this build? I see firstly a 1K, then a 1.5K and the link takes us to a 5.6K.....???? which is best??? Great vid as always...

@acmdq2007 4 жыл бұрын

When the transistor is conducting the voltage at the secondary turns the transistor more on, not off. It just turns the transistor off half cycle of the oscillation later.

@leopoldhausner3392 3 жыл бұрын

Very cool project as always! I just wanted to ask what is the diameter of the secondary coil and is it one layer or multiple layers? Also,what is the diameter of primary coil and wire

@michalvarsanyi612 4 жыл бұрын

That secodary looked like a few hours of winding. Great job!

@PlasmaChannel 4 жыл бұрын

Thanks 👍I found a way to wind it on a drill. First time I messed up though and totally wasted 400 feet of wire.

@ArduMaker 4 жыл бұрын

Vary nice video. How to make the primary and secondary coil?

@PlasmaChannel 4 жыл бұрын

Thanks! I sandwiched wire between the two pieces of Acrylic, and spun it slowly on a drill.

@virajd2817 4 жыл бұрын

Sir can you make a on how to make a pancake slayer please 👍

@flamethrowerguy5018 4 жыл бұрын

Brilliant video , lovely little coil. A build video would be greatly appreciated, especially showing how that coil was would.

@PlasmaChannel 4 жыл бұрын

Hi FG, thanks for the compliments. I didnt do a build because i'm getting a little tired of people stealing my build ideas, and selling them for profit.

@flamethrowerguy5018 4 жыл бұрын

Plasma Channel very true. Great build anyway.

@cold3lectric 2 жыл бұрын

@@PlasmaChannel **lets the terrorists win**

@nightrous3026 4 жыл бұрын

Its like a low current low voltage flyback arc!

@PlasmaChannel 4 жыл бұрын

Not that low of current. Off camera..it melts a steel needle in seconds.

@Stan-rs1ne 3 жыл бұрын

Why do you only have 170k subs!? You deserve at least a million :)

@PlasmaChannel 3 жыл бұрын

Thanks dude. I appreciate that. You can help by sharing some of my recent videos!

@Stan-rs1ne 3 жыл бұрын

@@PlasmaChannel Already did :)

@EasyCircuits 4 жыл бұрын

5:57 nice one 👍

@justinblakeman1364 3 жыл бұрын

do slayer exiters have open air discharges? and is the screwdriver it is arcing to connected to anything?

@Gergix 3 жыл бұрын

Nice video🙂 How did you make the primery coil and where is it?And is there only one layer of secundary or more?How many turns did you wind?

@PlasmaChannel 3 жыл бұрын

the primary coil is on the outside of the secondary (circumference), and it is 4 turns.

@firefox1136 3 жыл бұрын

Very nice build! But I still think, that it isn't the most powerfull tesla coil that works on the slayer exiter principle. The driverless sstc works on the same principle but runs on mains voltage and is mutch more powerfull. Your build is still very nice and it looks great! Did you wire the transistors in paralell? Thank you and have a nice day.

@secretagent5658 4 жыл бұрын

I love this project. We just got hit with a 5.7 magnitude earth quake here in utah. And many houses and buildings have been damaged. And our economy had tanked almost completely. So the only highlight is watching educational videos like yours on KZfaq.

@PlasmaChannel 4 жыл бұрын

S.A., I heard about the quake. My sincerest regards to you and yours. Hope you are well. I am honored though that you enjoy my videos right now. I'm considering making a video next week titled, "5 exciting experiments to do during a lockdown" or something of the matter.

@secretagent5658 4 жыл бұрын

@@PlasmaChannel Thankyou so much. I am doing ok and so is my family. We are just struggling. And I'm afraid more struggles are to come in the following weeks. My dad works for Delta Airlines and Delta is laying off 10,000 workers. And my dad might be one of them. My mom is out of work and I am keeping my part time job that doesn't bring in much. I like the title already and I like the idea even more. I am just so grateful that there are people like you that can come up with these very interesting and project inspiring videos. (There aren't very many people like you) As I have been trying to earn money to buy a camera to record my own science videos since 2018. But it seem I shouldn't be spending money at this point and rather should be saving it. So that'll have to wait. Sorry for the long reply. I wont waste anymore of your time. So I want to say thankyou for making videos you like, and exploring ideas you once thought were boring. Thankyou from deep in my heart, Thank You. :)

@filipbjelobrk9731 4 жыл бұрын

wow! didn't expect to see that 100% of the people that answered the pole were subscribed! thats awesome

@PlasmaChannel 4 жыл бұрын

Right?! Are you subbed?

@filipbjelobrk9731 4 жыл бұрын

@@PlasmaChannel Yeah, of course I am, I've been subscribed for almost 6 months now!

@sethsears517 4 жыл бұрын

Make a ruhmkorff induction coil next. Love the video.

@stuartcommon4651 4 жыл бұрын

Those things are the bane of my life, I'm currently counting turns and layers on a 1920's model that I'm restoring. All that impregnated paper insulation is making it so much fun! 🤣🤣

@3avefenixify 4 жыл бұрын

By fabor, I am part of several groups that study and experiment with scalar energy, your devices are very successful and reduced, they are giving us many ideas, we also study how to integrate it with Lakhovsky antennas, scalar medicine and free energy. Would you be kind and would you please us if it is possible to put subtitles in Spanish? Thank you for your brilliant contributions.

@PlasmaChannel 4 жыл бұрын

Hello, thank you for your kind words. I can consider subtitles.

@Gregtheegg12 3 ай бұрын

I was just wondering if there was a build tutorial for this circuit, because I wanted to get into this science area.

@eyedocduncan 4 жыл бұрын

Love watching your channel and the neat stuff you make. Have you ever thought of selling kits with all the components and a wiring diagram so we can make this stuff at home?

@PlasmaChannel 4 жыл бұрын

Yes I have, and am compiling the materials / info to start selling kits. It's been a full year in the making and hope to soon sell kits to all my builds.

@matthewcampbell7153 4 жыл бұрын

@@PlasmaChannel I'd probably be interested in your kits... although I do like to be creative using a 3D printer.

@RLB9844 4 жыл бұрын

Can an IGBT transistor be used or does it have to be a BJT transistor

@sauraviotdeveloper7094 4 жыл бұрын

Nice

@alexkonopatski429 3 жыл бұрын

That's amazing! Can you please make a Video how to made this Pancake Tesla coil?

@dragodestructor1060 2 жыл бұрын

Is tip32c is a good replacement for the transistor you used and did you blew up any transistor

@PlasmaChannel 2 жыл бұрын

The tip32C is okay, but I found it gets hotter and dies quicker.

@thecosmos3850 3 жыл бұрын

Hey Jay, what is the advantage of Pancake coils over cylindrical coils in case of using them in Tesla coils?

@samhoff1724 4 жыл бұрын

I should build one of these, but 5x larger with a dual resonent vacuum tube driver!

@ElIsraelJijijiji 3 жыл бұрын

Finally, thanks plasma channel, my coil its working now, why dont you make a DRSSTC coil?

@electrorush7754 3 жыл бұрын

how many turns are there in the primary coil.

@MaycourtRainworth 2 жыл бұрын

Show a DIY how to make it please really cool invention

@piratesofcarribean4211 4 жыл бұрын

Can you please tell which mosfet is used and value of resistance

@ratnakararumugam2582 2 жыл бұрын

where can i find details about positioning the primary and secondary coils? please.

@tiagokotryk2139 2 жыл бұрын

could you tell the lenght used for the primary and for the secondary?

@mazham786 4 жыл бұрын

For how long can you keep the spark going?

@meowmeow31415 4 жыл бұрын

which transistor is used and how much resistance should the resistor have

@robertsydes9727 4 жыл бұрын

How do you determine how strong of a resistor is needed?

@AidenMi 3 жыл бұрын

is there anywhere we can find a slightly more detailed circuit diagram?

@pablojr.1805 6 ай бұрын

What is the blue thing he used to connect his transistor?

@scipug3048 Жыл бұрын

I have a question: why do people always power it straight from a 9v battery and other low volt sources? why not have a first stage circuit bump it up to 600v, rectify it, put a capacitor to flatten it, and use that as the input to the slayer exciter? the arcs should be so much bigger right? or am I missing smth?

@mikesetbacken7891 2 жыл бұрын

I used to wind pancake coils for portable x ray units up to 300 kv . You can stack those coils to achieve higher voltage... You do nice work..

@PlasmaChannel 2 жыл бұрын

I’ve wondered above that. Stacking pancake coils. Insulation between them must be incredibly critical…

@johnschroeder9469 2 жыл бұрын

Since you did this regularly, do you know where the two coils are separated? I can only see the larger coil, secondary I believe.

@theelectronmachines 4 жыл бұрын

3:00 yes it would make an electric field, but concept behind that is the primary coil making an electromagnetic field that that would induce a current into the secondary based on lenzs law

@PlasmaChannel 4 жыл бұрын

Correct. For time purposes, I dumbed it down though.

@idicalidical5343 4 жыл бұрын

You are now 1/10,000,000,000 of the way to constructing your own tokamak, well done sir. And I hope that Nord is compensating you well, you deserve it.

@davemwangi05 4 жыл бұрын

duuude. what a joke.

@PlasmaChannel 4 жыл бұрын

Thanks idical, I appreciate that

@gasperharej9356 3 жыл бұрын

Hi, maybe this is a stupid question, but could you use this as a power source for creating ozone, from one of your videos?

@Rulox999 Жыл бұрын

Cool! But how do you make the elusive pancake coil????

@anthonyvolkman2338 4 жыл бұрын

Excellent build here! I have made my slayer exciter audio modulated. Try that and you will love it.

@PlasmaChannel 4 жыл бұрын

Thanks for the tip! I am designing a much more powerful slayer, that will blow this one out of the water. I'll add an audio feature to it

@anthonyvolkman2338 4 жыл бұрын

@@PlasmaChannel Youte welcome, check out my video of my sisye slayer Eddi exciter that is audio modulated. Also watch my video about my rotary spark gap I made. That little one I was talking about. I just got just got it uploaded a few days ago!

@adityadusad1043 3 жыл бұрын

wait what was role of led in the circuit cause i have seen a slayer exciter without a led

@erygion 4 жыл бұрын

I'd love to see how you made that pancake my friend. Do your transistors get hot? Either way great video and device :) I've never seen it done like that and I've built a few slayer exciter circuits myself. Very very cool 10/10 ⭐⭐⭐⭐⭐

@PlasmaChannel 4 жыл бұрын

Yes they do, and thank you very much for your compliments! The aluminum heat sink keeps them cool enough for about 20 seconds of operation.

@erygion 4 жыл бұрын

@@PlasmaChannel you're very welcome Jay, thank you for the awesome video and device. I'd love to make a SE circuit that can handle being on for hours but it's tough. That pancake though...I bet that was tough.

@davidprock904 4 жыл бұрын

You never did get back with me about bringing a flame up to the Water Bridge!

@PlasmaChannel 4 жыл бұрын

Hi David, been quite busy! I tried it right now though, and the flame was mildly drawn to the bridge. It was hard to tell though if it was merely due to regional effects of convection being affected and obstructed by the water, or, if the fire was actually attracted. I''ll have to try agian.

@davidprock904 4 жыл бұрын

@@PlasmaChannel did the flame change color, blue?

@holyorderofscientists 4 жыл бұрын

Absolutely genial! Thank you for showing this! I did not figure out you could also do it the flat way... ;.() I have a working so called free energy magnet motor on my channel that uses the same size batteries like you show on this video.

@PlasmaChannel 4 жыл бұрын

Glad I could help!

@holyorderofscientists 4 жыл бұрын

@@PlasmaChannel Today I was offered to see your Pancake Tesla Coil in my everyday news reel...Among NVIDIA, INTEL and TESLA automobile --- Quite an achievement! Also check out this link and scroll all the way down: vapaaenergia.com/foorumi/viewtopic.php?f=8&t=276&p=8268#p8268

@remcobooy9837 2 жыл бұрын

I'm confused, what is the resistor you're using..In the video I see a 1KOhm, in the schematic 1.5KOhm and in the description link 5.6KOhm??

@mykulpierce 4 жыл бұрын

Try it with a bifiliar pancake coil next! Tesla patent US512340A!

@mykulpierce 4 жыл бұрын

Here was a field demonstration of a bifiliar I made and powered by manually turning a AA on and off: vm.tiktok.com/sFaPch/

@PlasmaChannel 4 жыл бұрын

All the bifiliar coils i've seen are operated at really low voltages, so i'm not sure how well they'd handle higher voltages.

@mykulpierce 4 жыл бұрын

@@PlasmaChannel I think it will fair well. Tesla designed it for this purpose (in some pictures of lab you see large versions) but this of course depends on the dielectric strength of insulation of the wires and air spacing.

@piotrwyrw 3 жыл бұрын

I also own a slayer exciter, but my mosfets heat a lot. Is this your case too?

@electronicprojects2757 3 жыл бұрын

Wowww

@BlueprintScience 4 жыл бұрын

Interesting, I've heard that flat coils notoriously suffer from internal arcing. Mayhaps I heard wrong. Either way, very compact! Very pretty!

@PlasmaChannel 4 жыл бұрын

Hi Dayton! Thanks a bunch. Yeah, what's interesting is the flat coil was particularly sensitive to turns ratio. I got these results using 4 turns on the primary. Bringing it down to 2 turns causes open breakout to occur, but the sparks are cold to the touch. No power behind them at all. And they cant be stretched out. Its amazing how much current the arcs carry using this design.

@stuartcommon4651 4 жыл бұрын

An easy option to combat that would be to immerse the coils in oil or vacuum pot them in resin (second option not as easy but the vacuum is required to ensure the resin fully penetrates the gaps with no air gaps or air in the resin)

@BlueprintScience 4 жыл бұрын

@Heads Mess Just watched. I see what you mean. 'Twas a little hard to follow without narration, but I think I got it.

@BlueprintScience 4 жыл бұрын

@Heads Mess An understandable predicament. I guess I've just been lucky; I've used the same camera for years now. Its gotten up close and personal with explosions, thermite, high voltage, microwaves, etc. That camera is a trooper! P.S. I think we can *all* agree that high voltage looks much better in real life than on film :)