I hope everyone heard how much you were laughing running that mini might. That’s what it’s all about. Enjoyment.

You’re so right about scaling down sometimes, so much fun to run without fear of breaking expensive rigs.

This is the best Teton video Forever!!!

Attention all Teton owners. The charger must be removed from the outlet very carefully it comes apart and you will rip the inside cords. Put a rubber band around it and unplug it with your fingers touching the outlet

Dude! I thought I was throughly impressed with your driving skills. Well I was wrong, even more impressed. Damn!

Nice dude! Iove❤it!!! Im crackin a beer open! Yer fun

They are definitely a blast for the price. They do take a beating as well. I did the same thing got my daughter one then I had to have one.

It was fun watching you rip that little Teton!! It sounded like you were having a blast with it as well!! 💯 With your driving style I can't believe how well it held up! It definitely took some hits💥💣💥. Great video Eric👍👍

1/18 scale so much fun from time to time. Great video Thanks for sharing 👍✌

Awesome video man. I enjoy blasting my mini e revo from time to time. They are a blast and keep you smiling the whole time

Little truck, big sends! Rad 👍🏻

😂. What a blast! Did the same thing. Bought one for my kids, ended up building one for myself lol! If you find a solution for the diffs let us know! It’s the one issue with those things. Now you need to do an xl version with the short course chassis.

Man what a little ripper. I've never seen a teton fly lol I have one n it's basically a shelf queen I haven't had it out in a while. That stall on its keaster was awesome. Thanks for the fun video man 🍻🍻🍻🍻🍻🍻

That’s so cool dude. Love the mod and it absolutely rips. 😎🤙🏼

Jesus! Worlds greatest Teton! I don’t know how you pulled that off. New diffs every other run? I was obsessed with this thing in 2018 and got the upgraded shocks as well.

G'yeah! That was kool ! 😎👍

That's cool 😎 👍 right there ol'son. 👌

My brother😂😜🤙 you always come back with the ULTIMATE...and that's why i appreciate you and the content you put out...cause it doesn't matter the scale size,it's just the fun you have while doing what you do...great vid my brother👌👏💪🔥🔥🔥💯🏎💨👍😎🍻

that's so cool! I'll say it again, is there anything you can't drive the heck out of??? nope!

Awesome little truck 😊

That is Awesome! Now i want to Build One! 🤗😎

Awesome video to get home and watch, after racing my mini b most of the day… something different and down sizing is always fun.. like you said.. enjoy rc-ing. Absolutely love your videos. 👊

Looks like fun

Thats awesome!

These are so underrated got one in my collection they are awesome fun 👍👊💯

Yeah, we love Teton, we have it we did our pb years a go it is a beast!!!

Nice build💪

LOL that is awesome bash!

Damn! That was airborne and then it kept running !!!. Im not doingvthat to mine

Driving any RC is so much fun! I love all of them. If I had enough $, I would buy every single rc in the world 🤣. Thanks for the video!

Cool little buga 👍 Definitely a cool idea to widen it a bit. No fun having to go flip it back in it's wheels every few minutes. lol Looked pretty dang stable for as small as it is and it rips also 🔥 Cool vid 🔥👍✌️

It looks like a really cute mini monster bro👍💯😜💥

So cute 😻

Pretty good idea man. Runs pretty good 👍

Sweet stall move 👍🏻👍🏻

🤩🙉t ya hat SOUND 💥

Eric brother content is pure🔥🔥🔥as always...that mini beast rips dude😲...awesome vid👌🏻.....peace 🍻🏴󠁧󠁢󠁷󠁬󠁳󠁿👊🏻

Oh this brings back memories of when I had a savage flux xs that was a tough truck

Dude I've been waiting for this video

so cool!!!! :D must have one! :D

I got that for my Grandson for doing good in school last year he love it I bring mine out and all the time wants to race me.. I have a Talion... 😂

You tend to make a video, at the same time I decide to bring back out my Teton. I have a Mamba Micro ESC connected to a 5300 Castle 5300 0808 motor, plus all of the necessary Hot Racing, extras. I'm going to try your trick with widening the stance. I'm going to razzle dazzle this one, though. I want one body done up with lights, but I'm going to want another body for bashing. It's been so long since I first upgraded this thing that I forgot what pinion gear I have in it. I even bought TBR gear for it, way back when. Like you, I bought two, but I haven't taken that one out of the box yet.

Only when it sat on the palm of your hand I realised how tiny that truck is 😂 Still flips pretty well 👍

I'm certain you got the best set of diffs ever made for these. Lol.

Yesterday my nephews and I drove around 3 axial scx24s it was so much fun scaling down

Awsome brother Eric, it still my favorite scale..even if i dont use my cars they are a blast.

Well, if you love the Teton, check out the LC Racing EMB-T 1/14th. It is like a mini kraton but it has no center diff. LC racing is a racing brand that the all the WLTOYS are based on, but LC racing has better parts and build. Check LC racing line up out. You'll fall in love.

Cool video just to show you that any R/C car or truck you'll have fun you Crack me up running the Teton awesome thanks your friendly neighborhood Doorman william from NJ Forgettaboutit lol 😆

I’m redoing our Teton this weekend with 14-54, all steel pimped, shims, and castle micro x2, 3s and 5300kv, also bigger 3.2inch wheels, I should hit 105+km/h.

I ordered one of these today. going to run it brushless on 3s :P I'm surprised by your video that it handles so well. Something to look forward to. So i upgraded to a 6600kv brushless motor, i set the ESC to the smoothest possible accelleration and breaking. since my tire glue had dried up i put on 1/10 onroad slicks. i took the car out. hit the throttle and the car wouldnt go straight at all. the diffs were ok but it just decided to go heavy left or right from losing grip i guess. a few seconds later two of the pushrods or what they are called got torn off from the diff-cases. i didnt even get to drive in a straight line yet. and i see you jumping yours and such. so im waiting for aluminium diff-cases now, looking forward to see what breaks next time i hit the throttle. this is a fragile little thing.

Awww man that thing is a beauty!!! I may just have to get my daughter and me one lol!!! #Subbed

Sweet video!! I have a question I’m doing similar upgrades to my latrax. I’m putting a 2445 3600kv with a 54t spur and 16t pinion. It’s only going to be 2s and was thinking which motor would perform better 5400kv or the 3600kv.

Wouldn't mind a mini basher series

My buddy did this with the 1/16th erevo power system. The 380 motor. Tight fit but it does fit. Runs it on 3s with jb welded diffs. it’s a rocket

For pure fun factor you can't go past a good 1/18 rc👌

Did you do anything with the differential gears. I went brushless shredded the gears. So I used epoxy no more slipping but snapped the drive cups now. It is definitely a blast !! Any suggestions I want to bash mine like you are.

I have a pretty cool mini erevo build going on where I have modded everything but the motor, esc. Any advice on a brushless system combo I can put in this to run either 2 2s for 4 or 3s and what batteries I should try. I've been looking for a couple months but I'm a newbie and not exactly sure how the kv and motor specs actually mean. Please someone help me! Lol. This build is awesome. I live in a townhouse so the 1/16 scale is perfect to run at home

I'm ur new subscribe, I like it u r vid 😎

I got one for my son. I've built it with all metal parts now but I keep wearing out the slotted diff ends due to the play the axles have (stock or upgraded) I have a brushless system on it also but can't really find a good set of shocks for it yet.

How do you keep your differentials together bro my differentials keeps stripping out.. the 20 dollars a set metal ones strip out after 45 mins

Might be the hardest I have seen a Teton be bashed 🤣

Did you upgrade the servo? My Teton is all over the place! It won’t track straight at all!

Buddy they are super fast for stock and very durable haha. I got it for my daughter for Christmas, I’m buying another one as I keep stealing hers 😂

So is your next tests going to be the new Dromida vehicles? Pretty sure most of us would be ok with it!!!

Cool vid Eric. We run the Prerunner. I m gonna look into the Hot racing spur!

Will this work with out that esc? It’s a little outta my price range 😂

I enjoy the minis my self. I have a 1/16 e revo, with 5600kv 540 can 32t pinion on 4s. Insane! Dont believe it has a top end speed lol

Where did you get the brushless? setup

I own it but can you link to esc, battery, spur and motor? ^^ I reach on my Teton + - 60km/h, kinda + - 37mph?

Haha what an epic little rig bro! M2c? Haha jk 😜

This little thing is pissed!!

Make another bash video of this beast!!!

You should make a video showing your entire collection

1/18 are fun little trucks, you should get the wltoys a979b, i think you'd have a blast, upgrade the shocks to adjustable oil-filled for about 20 and its a beast, stock they do i think it was 37mph

Who makes it and where can I get one

Why not a HBX 16889pro?

I bought my girlfriends son one and it kinda hooked me, now I’m gonna buy a car but can’t decide because I want something a little bigger for going through grass

When are the M2C parts coming for it?🤣🤣

With the hex extension you should be able to run merv proline wheels

Which zee battery is that, softpack or the shorty?

I bought one for my son we love using it but I seem to have nothing but problems with it.

Have you had issues with the control arms? The lower arms on my son’s car have broken 3 times! Probably only 5-6 times actually driving the car..

Are this the stock diffs? great built👍

Is M2C still making parts for Losi 8ight XTE?

Hey I noticed you run mostly hobbywing and some hobbystar what's your opinion on castle creations just asking

Have you noticed that big rigs get a Hahaha, the smaller the rig gets it turns more into a hehehe 😅

Not bad but mine is faster, I got a castle mamba micro system in mine and a 3s pack from gens ace , it rips and the pack fits in the car perfectly , nice job tho man u got urs jumping nice

🤣🤣🤣

I am always replacing outdrives and diffs cannot understand why... I garrantee mines faster i have bigger tires 35amp esc 7200kv motor and high gears.

4800kv and no mention of the can size.

Hey I am just getting into rc and you caught me with this video and I got one! Can you please make a video on how to widen the suspension? Thanks

éxcélente ta chaine

j avout elle dechire