Worlds Loudest Turbo 6.2 Diesel After Modifications

Рет қаралды 26,508

Жыл бұрын

Did a few Upgrades to the old girl this round. Lowered Compression by Deshrouding the Valves, Used Std Thk 6.5 Head Gaskets, Ported & Polished the Heads Intake & Exhaust, Ported & Polished the Super 60, Ported Wastegate, Ported HX Downpipe Adapter, Polished the Pistons & Combustion Chamber, New Polished Lifters, Pushrods, Polished 6.5 Rocker Arms, Polished Guides & Retainers, High-Temp Coated bottom of Intake Manifold, High-Temp Coated the Diamond Eye Crossover Pipe, Ported DB2 Inlet, new 6.5 Fuel Injection Lines, Pump turned up 3/4 turn, and a 6.5 Valve Cover for Dual Pull CDR Setup. The Truck is a whole new Machine!

Пікірлер: 93

@paulherzmann6237 Жыл бұрын

sounds really healthy... Even on the video I can Hear the crisp sound of the engine sipping fuel. Nice job Man

@TheAscendedMaster Жыл бұрын

Thank you! Lots left to do yet lol

@Joel-ew1zm 3 ай бұрын

People love to hate on these detroits. I always loved them in humvees over the years. Seem some clapped out shitbox humvees start instantly and purr after sitting for months assuming the battery had a charge.

@johnnyringo2185 2 ай бұрын

I had one for about a year. Wouldn’t pull the hat off your head it was so weak. Only thing that kinda saved it was 456 gears but then it would only run 65 downhill. The one upside is you can’t kill em but o think I’ll stick with a 350

@mattleonard5268 Жыл бұрын

I love how healthy this engine is

@TheAscendedMaster Жыл бұрын

You and me both. She gets nothing but the best and loves it! I always say, "Preventative Maintenance is the best Maintenance".

@cupwalker24.7 3 ай бұрын

Very beautiful and clean and reliable ❤️

@TheAscendedMaster 3 ай бұрын

Thank you!

@scottdolan1526 Жыл бұрын

I like the gold touches to the engine, reminds me of the Oldsmobile rocket, with added turbo. 👍

@TheAscendedMaster Жыл бұрын

Ya I felt it would look good on the old Square and give the engine bay a vintage classic truck feel.

@waynepickhardt4975 Ай бұрын

Nice, running great!

@poonbandit9924 Жыл бұрын

She sounds dialed in you can hear it better at idle, buttery smooth. Very well done and unique, I love it.

@TheAscendedMaster Жыл бұрын

Thank you!

@someoneelse4132 Ай бұрын

Like putting lip stick on a pig man ! Love it . These trucks are bad to the bone , I don’t know why people hate em so much

@OFF-GRIDPhenohunt Ай бұрын

That is fucking SWEET!!!!

@TheAscendedMaster Ай бұрын

Thx man!

@young1ion191 8 ай бұрын

Fucking sweet man just got my first 6.2 Detroit diesel and I love it .

@TheAscendedMaster 8 ай бұрын

Welcome to the 6.2 crew!

@mattleonard5268 Жыл бұрын

Very clean running idi

@Yelladog78 Ай бұрын

I can hear the block cracking from here lol

@TheAscendedMaster Ай бұрын

Lol not this engine. Lowered Compression Ratio and it's a 81' Red Block. She be solid.

@V8AmericanMuscleCar 4 ай бұрын

Beautiful to see and to hear ❤

@TheAscendedMaster 4 ай бұрын

Thank you!

@V8AmericanMuscleCar 4 ай бұрын

@@TheAscendedMaster you're welcome! Greetings from Croatia! 🙋‍♂️

@Mike-Honcho- 8 ай бұрын

That’s SICK!

@codystrom8708 5 ай бұрын

Sounds great! Almost like a VGT the way it whistles so early in the RPM range

@TheAscendedMaster 3 ай бұрын

Thx! Ya I have done some work to the Turbo to improve flow but it is a Super 60 so it's naturally loud.

@arguswil 6 ай бұрын

What in the holy 6.2 turbo diesel we got here 😂

@leonardharris8803 8 ай бұрын

dual pull cdrs are a must when pushing that much air. My 6.5 wouldn't let the turbo drain unless i ran two with my setup.

@gentilejoshsaved1646 Жыл бұрын

Right on.

@varigbruna8081 2 ай бұрын

Nice job bruh🎉

@TheAscendedMaster 2 ай бұрын

Thank you!

@05EVORS Жыл бұрын

Stumbled on your stuff today T-shooting my CUCV J code dying 5-10sec after cold starts out of nowhere on my '84 M1008...BAD A$$

@TheAscendedMaster Жыл бұрын

Awesome. Check your lift pump, fuel filters, fuel hose & lines for any leaks.

@Chillaxin202 11 ай бұрын

That’s fucking insane

@josephhill7072 8 ай бұрын

Would love to know what youve done to it. Man what a damn beautiful truck! Getting one myself today.

@TheAscendedMaster 8 ай бұрын

Thank you and congratulations! They are great rigs to own. Check out the upgrades compilation videos I have on my channel to see the different updates and upgrades I've done.

@josephhill7072 8 ай бұрын

@@TheAscendedMaster oh sweet! I'm absolutely gonna check them out! Thank you man!

@TheAscendedMaster 8 ай бұрын

@@josephhill7072 You got it!

@jamazonnewyork3221 Жыл бұрын

wooooooooooooooow !

@TheAscendedMaster Жыл бұрын

That's what I said lol

@lonelyplanet1080 5 ай бұрын

how many blades you running that turbine wheel?.... maybe 9 blade, maybe 5 blade, either way it sounds really good 👍

@TheAscendedMaster 5 ай бұрын

Thx. It's a 7 Blade 60mm.

@Jon-jk8vd 11 ай бұрын

noice

@peterjohn3180 7 ай бұрын

Looks very professional, but how did you compensate for the extra air? Turning pump up increases the fuel by lengthening the time fuel is injected ( degrees of rotation) and anything beyond around 32 degrees is wasted. Is it a 6.5 pump? Bigger elements would be ideal, the pump has 2 I believe, they pump at same time, as the assembly rotates, you probably know all this though.🥸😁 I always wanted a 6.2. I live in UK, a friend had one in a land rover, to us they were offered as conversion kits but they had a bed reputation for reliability...... I want to put one in a small British market car?

@TheAscendedMaster 3 ай бұрын

More air needs more fuel so yes I turned the pump up some. It takes a while to get everything adjusted and tuned together properly for it to work in sync efficiently and effectively but eventually its perfect. I have a 4153HD db2 pump which has worked wonderfully for the past 8 years. I have thought of getting a db2 4911 pump but honestly I don't need it. The pump I have gives me plenty of power and great fuel economy without having the fuel maxed out which I've never actually done yet cause I just don't need it. Im not drag racing but daily driving it so I need longevity and efficiency over power.

@stockholm2375 6 ай бұрын

No issue with exhaust getting in the cab with the exhaust being so short?

@TheAscendedMaster 6 ай бұрын

Oh yes lol I can't drive with the windows down as it washes back up into the cab and is really loud. I do need to bring it further back to the rear tire to eliminate both issues.

@k30mtb78 Жыл бұрын

Does the turbo sound different or is it just the video?

@TheAscendedMaster Жыл бұрын

Should sound different. I completely ported and polished it as well as the Downpipe Adapter.

@jefffaubell5271 2 ай бұрын

The 6.2 was a good dependable engine, which I believe turned into the 6.5 which diminished its reliability. Also, the 6.2 was not a detroit diesel although it is a GM product.

@TheAscendedMaster 2 ай бұрын

The 1982 6.2 was designed by Detroit Diesel for GM.

@sherwinstaudt1881 2 ай бұрын

@@TheAscendedMasterI drive one every day, 1982 Chevrolet C10, had it since it was new, 937,000 Mi on it right now, body of truck is in excellent shape no rust .all that has been done on it is oil pan gaskets, rear main seal, several water pumps, valve job, 1 injector pump, in about 50 or 60 starters, starters are junk thank God their lifetime, I've had just about enough on starters think I'm going to find me a gear reduction starter. Three junk 700 R4 Transmissions. I use it on the ranch nowadays very little road driving, if I Road drive it and keep it under 70 I get around 24 Mi to gallon.

@bradyshook8531 6 ай бұрын

Is the red filter for coolant?

@TheAscendedMaster 6 ай бұрын

It is a Coolant Filter kit yes.

@edgarreyes2044 4 ай бұрын

Would you be willing to build another one and how much would you charge for the engine build

@TheAscendedMaster 4 ай бұрын

Sounds fun but honestly I'm disabled and can barely care for myself anymore and keeping my old girl running takes what little energy I have left.

@RatsnRods 4 ай бұрын

Looks like I'll be rebuilding mine in the next few weeks, any upgrades I should do while she's taken apart? It's already got the banks kit on it with a j code intake.

@TheAscendedMaster 4 ай бұрын

There are always upgrades and updates that can be done just depends on how much you want to spend. Turbocharged using a j code intake can't be done unless you plugged off the ports on the side. Has to be a 6.5 Turbo Intake or off a Military engine.

@RatsnRods 4 ай бұрын

@@TheAscendedMaster it has the ports plugged, i bought her with it like that. what do you think had the best bang for the buck? I'm thinking I might polish and possibly port some things like you did.

@TheAscendedMaster 4 ай бұрын

@@RatsnRods Oh ok good then. Porting is useful same with Polishing when done right.

@RatsnRods 4 ай бұрын

@@TheAscendedMaster what would you recommend be done? I don't want to spend too much but willing to put a lil bit into her

@TheAscendedMaster 4 ай бұрын

@@RatsnRods I would honestly suggest that you focus on trouble prone areas first. I.e. Harmonic Balancer, Fuel System, Head Bolts, Glow Plugs, pre cups, cooling ect before attempting any other mods. But it all comes down to you and how much you want to do and spend.

@mcalvert1000 3 ай бұрын

Beautiful. Injector timing seems to be dialed right the F in. I don't see any leaks, you got any oil in that damn Detroit? 😅

@TheAscendedMaster 3 ай бұрын

Thank you. She's a solid girl and doesn't leak a thing.

@mcalvert1000 3 ай бұрын

@TheAscendedMaster Impressive. I've got a pretty clean 6.5td Silverado, but it marks its territory! This thing is china cabinet clean, and sounds like a P400. Nice work. Gonna check out your other vids.

@TheAscendedMaster 3 ай бұрын

@@mcalvert1000 I appreciate that! Ya I have lots of content on my work and upgrades others can learn from and is definitely worth checking out.

@hi8803 3 ай бұрын

Engine bay clean as fuck, interior, trashed, lol Sweet rig dude.

@TheAscendedMaster 3 ай бұрын

I always focus on what is most important first which for an old truck like this which is everything mechanical then I'll work on the cosmetics.

@louiscarodine6175 Жыл бұрын

I have a 6.2 in my humvee but no where near that kinda power lol

@TheAscendedMaster Жыл бұрын

Ya she's a bit of a Frankenstein build lol

@stevebento2711 Жыл бұрын

4" exhaust? Sounds nasty

@TheAscendedMaster Жыл бұрын

Ya buddy!

@jonathansparks3386 5 ай бұрын

Is that one of those Olds diesel engines

@TheAscendedMaster 5 ай бұрын

Definitely not. It is a 6.2/6.5 Turbo Detroit Diesel.

@johnwilburn8319 Ай бұрын

Where do you come up with your crap?

@cranki6316 8 ай бұрын

Why doyou want it to be so loud?

@TheAscendedMaster 8 ай бұрын

I've always liked to hear the exhaust on my vehicles as it helps me know just how the engine is running by the sound. I suppose I also like to be a menace to society and wake everyone up in the neighborhood with my 42 year Detroit Diesel and dragstrip type exhaust lol

@Jean_1999 11 ай бұрын

Engine clean af and rest of the car looks trash lmao😂👌🏻

@TheAscendedMaster 11 ай бұрын

Lol Just the way I want it too.

@Jean_1999 11 ай бұрын

@@TheAscendedMaster Its ok man if you like it like that its fine👍🏻

@Jon-jk8vd 11 ай бұрын

@@Jean_1999that's how it is done around here

@user-fw4jl6px7b 11 ай бұрын

It's not a car.

@jesses.7107 4 ай бұрын

The pickup looks great.

@rearspeaker6364 5 ай бұрын

now it needs air conditioning.

@TheAscendedMaster 5 ай бұрын

I thought about it but honestly I live in Oregon and it isn't hot enough long enough for me to want to. I was thinking if I needed too of just getting an RV air conditioner/ heater unit and mounting it through the roof of my camper shell and call it good.

@bobbyboucher5309 Жыл бұрын

What turbo is that? Is all that sound from porting? Im curious cause im porting heads in next few days.

@TheAscendedMaster Жыл бұрын

Quadstar Super 60. I think between the Heads, Intake and Turbo being Ported, the 4" side dump exhaust and fuel increased is what gives it its unique sound.