Hello! Yes, black engines are reliable and expensive. And whites sometimes have problems with the gearbox. You can take a black motor with high speeds, and put adapters with large gears on it to raise the speed even more. The principle is like riding a bicycle.

Hi! Yes, the black motors have proven themselves well. I think they can be used in your projects. You just need to know what voltage you will have and what gearbox you need for the speed in the project. And you are done!

@@Robotics_Robot So at 12V an 8A power supply is enough?

@@spacetravelDEV Yes! That's enough for one engine.

I didn't understand the question. If you meant rpm, there are 12.

Hello! What driver are you using? Or Arduino?

Hi @@Robotics_Robot im only using pwm driver.

can you help me with the wiring diagram of a joystick potentiometer to pwm dc motor speed controller

@@coolkalangjack If you want to connect to exactly the same driver as in the video. It's unlikely that you will succeed. The joystick has a potentiometer in the middle with the value set to the middle value. And the potentiometer has values ​​from 0 and above. The engine will start from the center position. If you do this on an Arduino, it can be removed programmatically. And if it’s the way you want, I don’t know. There, then the joystick needs to be disassembled and the springs removed so that it is from the zero position, and not the central one. And reverse will still work on the buttons. If I have time, I might make a video on this project. I will try.

@@coolkalangjack Ok.

Hello! It was a flexible coupling for fixing the central shaft of the engine! Sold with motors.

@@Robotics_Robot on Amazon?

@@akeemgriffiths4459 No. I bought motors on another electronics site.