Worst Handling Stand-Up ? - JSB Jacob's Newest Jet Ski

Рет қаралды 5,966

Жыл бұрын

If you would like to support me and my projects, I have created a Patreon account. Regardless of the amount, every bit helps, will be put to use and is awesome motivation. Thank you so much !! www.patreon.com/Joel_A
Support my channel and get cool crap ! spark-bolt-city.creator-spring.com/
My second channel, Lowered Expectations, for extras, bonus clips, and random nonsense. kzfaq.info/love/Fj4XBl8m2O4AEqQ_V9dr9Qvideos
Actual description:
If you haven't already, be sure to check out kzfaq.info and subscribe !
On my first day visiting the Jetski Brothers, Jacob revealed that he had purchased a Polaris Octane the evening before. In the chaos that followed (that whole day) I actually got to ride the first Polaris Octane I've ever seen !
Though I ride an X2, stand up skis are quite different due to not only the hand pole moving, but also foot placement being on the outermost left and right rather than in a foot tray. I started to get used to this ski as I rode it, but as you will see / have seen from the footage, it's a challenging ride for me.
I thought I better make this statement... Yes, I know the ski had issues with the CDK 2 carbs and they likely needed work... I'm also aware that two properly sized, and properly tuned carbs are better than a single. The single carb and manifold worked really well once it was tuned properly, and it was easier to tune properly because there was 1 and it is a SBN.

Пікірлер: 79

@johnplutino6804 Жыл бұрын

They made 500 of each year, 3 years 2002, 2003, 2004. Just enough to race them. Love my octane.

@JoelArseneaultYouTube Жыл бұрын

Awesome ! Thanks for the info. I assume the International Jet Sports Boating Association required 500 as a minimum production same as they do for other race sports like rally cars. How long have you owned it? Have you done any mods to yours? How do you feel about the handling? Sorry for all the questions.. I'm just really curious.

@johnplutino6804 Жыл бұрын

@@JoelArseneaultKZfaq I got it from a guy who found it brand new in a shop in Montana. He put about 40 hrs on it. I've had it since 2007. No mods I don't do the turn thing I jump wakes and it LAUNCHES. 3 foot wake 10 foot air.

@johnplutino6804 Жыл бұрын

I like to do slides and it does those well. Not much on the carving, but I let a kid who races ride it and he tore it up on the turns. Lol

@JoelArseneaultYouTube Жыл бұрын

@@johnplutino6804 That's really cool. I wonder how many of them are left. I've never ridden wakes anything close to that big... It scares me just to see others doing it in videos... Seems pretty crazy ! Just riding and not jumping must be pretty intimidating, at least until you get used to it... I think at the largest I may have ridden 3 foot wakes in a storm... but my ski had a hard time to get any air at that point as it was underpowered.

@JoelArseneaultYouTube Жыл бұрын

@@johnplutino6804 Haha... nice. Yeah, if you want to slide around it does that pretty well. I wondered if it just took a different technique to get it to turn. Maybe I'll get to try it again some day.

@Jacobskibros Жыл бұрын

This was the best video..... In the universe. I think the most important person was in this. Glad you made it home!

@JoelArseneaultYouTube Жыл бұрын

Haha... Yes, you were in it ! I made it home with all my goodies, even. 👍

@badm0t0rf1ng3r 5 ай бұрын

Theres one for sale around me and Its been on there for a while and I'm seriously thinking about just seeing what the guy is willing to negotiate.

@JoelArseneaultYouTube 4 ай бұрын

Nice !

@JetSkiBrothers Жыл бұрын

This is going to be an epic video cant wait to watch, still editing our video so I will drop a like and come back later to watch.

@JoelArseneaultYouTube Жыл бұрын

Thanks ! I'm excited to see your video as well !!

@justinholmes5328 Жыл бұрын

Polaris made some very nice water craft.

@JoelArseneaultYouTube Жыл бұрын

I agree. It's too bad they didn't stick with it. I worked on them back in the late 90s early 00s (at a dealership) along with their snowmobiles. Would have been interesting to see what they produced.

@TheSlamnslash Жыл бұрын

So how long until Joel gets an SXR800 and swaps it to an 1100? How do I know this? HA! Level up Brah!

@JoelArseneaultYouTube Жыл бұрын

HAHA... You've been paying attention. If an 1100 triple in an SXR excites you... I'm not sure how excited you will be about my secret (for now) winter project ... It's what some would consider next level SXR swap...

@madnessmaker6162 Жыл бұрын

I had one some years back, was one of the best all around skis I had. Now wish I never sold it. They had their share of issues. I replaced elect box.and put electrics in a kawi 750 box. The issue of tray foam getting wet from leaks,ii removed all orig foam sealed and added drains along with new closed cell foam on top of a layer of ping pong balls in bottom of tray area. As well as rear/front footholds and shortened the pole -2", Ski handled well with set of tubbies and am intake grate, Def rode more flat then a sj,sxr,or even current superfreak I ride, Wish I still had it though..👍

@JoelArseneaultYouTube Жыл бұрын

Isn't that the way it always works... You spend a bunch of time and money sorting something out to get it just right... and then sell it. Thanks for the comment ! Very interesting to hear other people's experiences.

@jasonskibrothers2192 Жыл бұрын

Nice wolf shirt. The timeline is repaired!

@JoelArseneaultYouTube Жыл бұрын

For one of my recent videos I actually had a different shirt on, went and changed into my wolf shirt to shoot some filler, and then just used voice over ... but I was wearing the same shirt !

@jasonskibrothers2192 Жыл бұрын

@@JoelArseneaultKZfaq another job well done for the chronoguard!

@JoelArseneaultYouTube Жыл бұрын

@@jasonskibrothers2192 Now I have no idea what you are talking about.

@jasonskibrothers2192 Жыл бұрын

@@JoelArseneaultKZfaq oh! 🧐riiighhht🤫...me neither 😉 good call bud. You can't be too careful.

@JoelArseneaultYouTube Жыл бұрын

@@jasonskibrothers2192 I think were'r being followed...

@boshons Жыл бұрын

Stoking the 2 stroke fire again! Outta sight

@JoelArseneaultYouTube Жыл бұрын

I’m all about the 2 cycle stuff. I do have an interesting 4 cycle build planned tho.

@jerl.980 9 ай бұрын

My 2004 was pretty good. It turns like a square nose superjet. I had tubbies on it and the hook up was the best of any stand up i rode. I just turns pretty flat and when the back grabs hard you go flying !!!

@JoelArseneaultYouTube 9 ай бұрын

Interesting. I have had a few people comment along those same lines.

@jerl.980 9 ай бұрын

Buy a superjet or sxr800. The octane is a difficult ski tonrepair when something gets wrong. Took 12month finding wnginemparts to rebuild it after the crank decided to explode😢. But it was a 58 mph ski almost stock.

@JoelArseneaultYouTube 9 ай бұрын

@@jerl.980 Yeah... A month ago I got to ride a stock 701 Superjet and a Superjet with an 1100 Kawasaki in it, and I want one now. So good. My buddy BJ had a SXR 800 I rode a few times and another buddy just picked one up earlier this year. I like them, but not as much as the SJ.

@jerl.980 9 ай бұрын

Depends what is your goal what you will do with the ski. A 701 superjet with a factory pipe rejet carb and put primer, mod the cdi for higher rpm cut off, repitch impeller and if you want a high compression head, lighter fly wheel.All the power you will need really in a light package. I rode a race sxr1100 and was not impressed. It is all mid to top end and very nose heavy.

@JoelArseneaultYouTube 9 ай бұрын

@@jerl.980 I don't have a lot of experience on stand up skis, and I have never raced or plan on racing. My judgement of the 1100 Superjet was based on how it felt a little more planted than the 701, and I love the sound. I get that most people are more interested in actual performance that can be measured and verified, but personally, I just like messing with things, testing till failure and messing with them more. I have very little interested in following a proven recipe or bolting on performance parts. I fully understand that there are proven ways to make a ski work better and tens of thousands of R&D hours ... Not sure if you have seen any of my 1100 videos, but this year I machined out an OEM head and made my own billet domes on my manual lathe. My X2 works really good (when it works) but I have no delusions that it is the fastest or best engine build. The truth is that I enjoy working on it as much or more than I enjoy riding it 🤟

@AtimatikArmy Жыл бұрын

Joel, I see you apexing the corners and keeping your corners tight, you would be a good racer! And dsmn your x2 is really fast, it's evident even against that octane! Proof us in the pudding here.

@JoelArseneaultYouTube Жыл бұрын

I think racing is just in my blood... tho I haven't done much on motorized stuff, haha. Yeah... we were all really impressed with my X2. Sometime in the future, we all ride it and do timed laps ... I'm really curious to see what the times are as Josh has that footage. I have some footage of me doing hot laps, and got to hear others ride it around the track... man it sounds GOOD !! haha... not trying to brag... but it's awesome 😂 I have some footage of me carving buoys one day while I'm trying to diagnose an issue in the X2... it looks crazy.

@AtimatikArmy Жыл бұрын

@@JoelArseneaultKZfaq awesome stuff! And yeah your X2 is mean sounding for sure!!

@achmed51 Жыл бұрын

Nice! It looks super shallow there, not worried to hit something? nice location overall, i like your videos they are entertaining to watch.

@adrianwall9130 Жыл бұрын

Very very cool, can't believe you broke the throttle on the Polaris, I have never ridden a stand up ski . It looks really hard to ride, any way rip up those skis and water, have fun, cheers mate

@JoelArseneaultYouTube Жыл бұрын

I guess when Polaris made that throttle, they weren't thinking that some crazy Canadian was going to kick it off ! haha. It's quite challenging to ride a stand up. Not all of them are as tricky as the Octane, and you don't have to ride them wide open, haha. I've got some footage of me riding some other stand up skis that I will be posting eventually. I think you will see that I got better at it and some skis are easier to ride.

@JetSkiBrothers Жыл бұрын

That octane slammed you a few times. Reminds me of when I was riding the SeaRat against the dasa swap ski and got slammed multiple times haha. It’s not like it’s the worst thing but it isn’t fun either. So yeah I can see how that ski seems like it’s trying to get you.

@JoelArseneaultYouTube Жыл бұрын

I remember watching that video and thinking... "he's not really going to try it again... is he" and the BAM... again ! I keep looking at the searat like... I could make you work and take you to the lake... but should I....or should I do some handling mods first, haha. The problen is I really don't know what I'm doing when it comes to handling... I'd have to just copy my X2 😂

@ColinDresser Жыл бұрын

Any gartors in them waters?!? Looks like a blast!

@JoelArseneaultYouTube Жыл бұрын

Haha... I heard there's gators in them there parts. I don't even like plant life touching me (hence the wetsuit even when it's hot out) so that's a big "no thanks" to gators. With all the noise we make they'd probably think there was a herd of water buffalo passing through.

@adrianwall9130 Жыл бұрын

Hey Joel can you put sponsors on the stand up ski, the octane ski , as that may change the handling of the ski,,. Cheers mate, just wondering

@JoelArseneaultYouTube Жыл бұрын

Yes, you can put sponsons on a stand up, and people do. From what I understand, the issue with the Octane is that the rear of the ski doesn't sink into the water far enough, so even tho they do install sponsons, they don't cut in very deep. There a cool video of a modified Octane that is a old race ski and they show some of the mods they have done to make it turn. I will post the link to the video.

@JoelArseneaultYouTube Жыл бұрын

Skip to 3:30 to see the steering and handling mods. kzfaq.info/get/bejne/a56mo7Kfm7TPp4k.html&ab_channel=WatercraftTalk

@adrianwall9130 Жыл бұрын

Thanks that was very informative

@albertosalvatori8666 4 ай бұрын

Top speed?

@JoelArseneaultYouTube 4 ай бұрын

Tops speed of this Octane was around 53 MPH. We didn't GPS it, but my X2 runs 55, 56 and it was very close in a few side by side runs.

@AtimatikArmy Жыл бұрын

Can't believe that stock yamaha grate performed better than that Jet Dynamics but sometimes different things just work despite conventional wisdom and this may be one of those times!

@JoelArseneaultYouTube Жыл бұрын

Apparently these hulls have issues with the rear of the ski not sinking into the water and that makes them not corner well. People have tried all sorts of things to get them to work well and many just say that it doesn't corner. I seen one that actually had rudders installed as well as the steering nozzle. It is possible that this grate allows it to sit in the water better... tho that would be counter intuitive to me.

@Jacobskibros Жыл бұрын

It's probably worse for hook up in the rough, but the trade off is that you can lean it over now. I am the only person I know that likes the stock intake grate on the superjet as well. I just like how they turn better that way.

@JoelArseneaultYouTube Жыл бұрын

@@Jacobskibros He has spoken ... and so it is. I really liked it more after/

@AtimatikArmy Жыл бұрын

@@JoelArseneaultKZfaq perhaps try a shortened plate. Reduce the planing surface area.

@AtimatikArmy Жыл бұрын

@@Jacobskibros I have a full mod square nose with a modified Jet Dynamics top loader. It rear scoop was lowered to 12mm below bottom of the hull (IJSBA legal limit at the time) and the front scoop at 6mm. But in racing when its super choppy when you have plenty of power, you want as much hook up as you can possibly get. Plus the added braking helps when you let off the gas going into a corner. So was just interesting what you found to work on that ski. Jacob, you riding style is almost identical to me, even riding goofy foot and all! You even shred on the 550s as well!