Awesome video and awesome machine! Tony if you see this send me one for review 💀
@cappn_ronaldo7 ай бұрын
Thanx, Darklord
@jonathanjulius19037 ай бұрын
Thanks for the shoutout brother! Best review! I love this machine since i changed the motor to coreless and it is my daily driver now! Easily my best machine so far!
@cappn_ronaldo7 ай бұрын
Im glad you got it runnin to ur liking and ur welcome brother. Thanks for watching 💯
@dominickwilkes26626 ай бұрын
What motor did you replace it with
@jonathanjulius19036 ай бұрын
@@dominickwilkes2662 i replaced it with 2016mm motor from aliexpress, but not a swiss one
@jrvega95597 ай бұрын
Been obsessing about this machine ever since you made this video, but I just bought 2 different machines last week. I can’t wait to get it. Thanks for the content. Love the videos
@cappn_ronaldo7 ай бұрын
I know the feeling, they kept teasing its release on Instagram and then i finally got a message saying that i could put my order in....felt like it took forever tho haha. And thank you i appreciate you taking the time to watch them....lemme know when you get your E60
@juniorvega80707 ай бұрын
I definitely give you an update the minute I give it a try. I’ll be on the lookout for more of your future videos.
@cappn_ronaldo7 ай бұрын
@juniorvega8070 good to hear!! Stay locked brother 🤘💯
@Tattoobart1477 ай бұрын
Good stuff man!! Wont lie, a bit jealous you got to review this machine but i am verry happy for you! Cant wait to get my hands on one! Keep up the good work and dont let your motivation get in the way! We’ve all been there just push through. You got this 🤘
@cappn_ronaldo7 ай бұрын
Thank you for the words of encouragement, brother. There gonna be sending mei the Pro lid here soon as well as something else that they have been developing for the E60 that i cant quite say what it is yet but it should be interesting. Thank you for watching my friend i really appreciate it
@jlc23246 ай бұрын
After months of searching, and almost settling on a DragonHawk adjustable pen, I think this video has changed my mind. I just reached out to Tony with a couple questions to help me decide and I hope to begin learning soon. Thanks for the great video about this machine.
@cappn_ronaldo6 ай бұрын
Thank you, my friend. They should be back from holiday today or tomorrow. Let me know how it goes and if you have any questions dont hesitate to ask
@cappn_ronaldo6 ай бұрын
I spoke to Tony about you. Unfortunately he will not be back to work for another 2 days due to there new year celebration. Do not wrry tho because when he gets back hes gonna get you the best deal
@jlc23246 ай бұрын
@@cappn_ronaldo Bro!! Thank you 🙏🏻
@AndrueSOCALАй бұрын
These look crazy
@cappn_ronaldoАй бұрын
Yeah E60 is off the chain, very VERY powerul
@mg_customs85317 ай бұрын
Mine just came in today, thing feels like a million bucks! Thanks to wos tony! Got a hat and table cover with it. What stroke were you running?
@cappn_ronaldo7 ай бұрын
AWESOME!!! Glad you got hooked up. Tony is a great guy. I run mine at 4.0-4.2ish.
@josuemolina600216 күн бұрын
Bro ! ava ep10 or this machine Wos e60 ?
@cappn_ronaldo16 күн бұрын
Bro WOS E60 all the way, direct drive 💪
@mg_customs85317 ай бұрын
Hey Ron! Have you tried this thing on a 3mm stroke yet? Going to bust mine out and practice this weekend
@cappn_ronaldo7 ай бұрын
Yeah i have i shades good at 3.0mil. I kept it low like 6.5/7.0 volts with a 1011 flat mag and it turned out great. Its my latest tattoo on my IG if you wanna check it out
@chrissajdik7 ай бұрын
🔥
@cappn_ronaldo7 ай бұрын
🤘
@byronsontaykeepit68125 ай бұрын
Would the the E60 be good with realism type of tattoos ?
@cappn_ronaldo5 ай бұрын
They recommend the E50 for black n grey/realism.
@Factsmakeyouthriller7 ай бұрын
I just got e 50 but I don't know how to use 5mm stroke without damaging skin and is that possible 5mm stroke for packing and shading and what the purpose of jump Start please give me some your thoughts
@cappn_ronaldo7 ай бұрын
Jumsptart is for cartridges with strong membranes or you can use it to free ur needles up if your ink has dried in the tube. Its very possible to pack with the 5.0mm HOWEVER i would only use it for large magnums (#1223-#1245). I would avoid shading with th 5.0mm. If your wanting to line with 5.0mm i would suggest only doing so with large rounds, start at low volts and avoid going to slow. One thing you would have to worrt about is scarring up the skin and your linework will be raised to the touch after healing...it will go away after time but never completely.
@bttaylor005 ай бұрын
Is the Ambition Mars machine still being give away?
@cappn_ronaldo5 ай бұрын
Once i get to 1k subs...Adam is gonna give away the Ambition Mars machine.
@bdee10847 ай бұрын
Wich scoreless motor did he put in?
@cappn_ronaldo7 ай бұрын
A 2016mm coreless from aliexpress
@bdee10847 ай бұрын
@@cappn_ronaldo is it faster or just stronger?
@cappn_ronaldo7 ай бұрын
He made it out to be much stronger, brushless are said to have a longer lifespan but less torque than a coreless wich has more torque but less of a life span
@Skiwakr1046 ай бұрын
Hay capton Ron,how can I get a discount for E60?
@cappn_ronaldo6 ай бұрын
#1 gotta be subscribed i trust that you are. #2 got message my boy WOS Tony via Instagram....tell him your a subscriber and you would like to buy an E60 and Tony will hook you up
@IvanEstevez6 ай бұрын
I need this machine, how do I get a discount?
@cappn_ronaldo6 ай бұрын
Gotta be subscribed and then contact WOS Tony on instagram. Let him know your my subscriber and he will get a discount
@IvanEstevez6 ай бұрын
Will do
@brandenmarshall32596 ай бұрын
Wow thanking a company for being able to clean your own machines. Smh. can you put it in an autoclave?
@cappn_ronaldo6 ай бұрын
Your asking if you can put the whole machine in an autoclave??