Divorced rear driveshaft set up to eliminate axle binding
Пікірлер: 28
@vladHENARO4 жыл бұрын
Great work! Congratulations!
@makisigrcgarageperformance17134 жыл бұрын
Vladimir Shotskin thanks
@huntingrc71614 жыл бұрын
Awesome engineering
@makisigrcgarageperformance17134 жыл бұрын
mohd inas thanks
@primasyuana4 жыл бұрын
awesome...like this..
@emersonpedro39443 жыл бұрын
👏👏👏👏👏👏
@CLAUDIOSRC95299 ай бұрын
@nickyarbrough28833 жыл бұрын
Where did you order all the metal steering and drive shaft components? Does the 2nd front axle require a "bridge" or center axle to allow the driveshaft to reach the 1st front axle? Really excellent work.
@makisigrcgarageperformance17133 жыл бұрын
Thanks....My answer is yes to your question, it’s difficult or almost impossible run straight driveshaft from gearbox to front axle without using middle front bridge axle due to limited space.. Ordered parts mostly from Aliexpress few from Ebay
@nickyarbrough28833 жыл бұрын
Yes my question is what kind of axle is needed to join the 1st and 2nd drive trains as you have done with this 8x8. A standard front axle doesn't have that opening on both ends to allow access to the gears, right?
@makisigrcgarageperformance17133 жыл бұрын
@@nickyarbrough2883 actually you can use the gears and housing covers of middle rear axle to the front axle
@nickyarbrough28833 жыл бұрын
@@makisigrcgarageperformance1713 this answers my question exactly. Thank you. Nice engineering.
@awesomusmaximus37662 жыл бұрын
I use a portal differential just like the real trucks
@makisigrcgarageperformance17132 жыл бұрын
Nice
@LuckyRubb3rDucky8 ай бұрын
I know this is an older video but I have a question. What motor setup did you go with? As in what gear reduction on the planetary and how many turns on the 540 motor?
@makisigrcgarageperformance17138 ай бұрын
1:3 reducer on 540 80t motor
@LuckyRubb3rDucky8 ай бұрын
@@makisigrcgarageperformance1713 You are awesome, thank you so much!
@makisigrcgarageperformance17138 ай бұрын
@@LuckyRubb3rDucky cheers! Glad to help👍
@tekayvoong4773 жыл бұрын
What part are you using to hold up the motor mount?
@makisigrcgarageperformance17133 жыл бұрын
Tekay Voong - L shape 540motor mount
@PedroSilva-yv5df2 жыл бұрын
How do make the steering on the 8x8 iam starting to make a MAN, iam having problens in the steering. Can u show how u do it? Thanks.
@makisigrcgarageperformance17132 жыл бұрын
Dual servo installed at the frame right above the axles (one servo each). Sorry thats the only video i have for this truck.