WPL C14 370 Motor/Metal Gear Transmission & 9g Servo Install
Рет қаралды 51,553
2 жыл бұрынMotor and Servo upgrade to my WPL C14. This is just the install. Not a run video. That’s in the next one. Links to everything used in this video and past videos below.
370 Motor Metal Transmission:
Amazon: amzn.to/3q483Pz
Banggood: www.banggood.com/custlink/3GG...
Ovonic 2S 1000mah Lipo Batteries: amzn.to/3rbJ25w
9g Servo:
Amazon: amzn.to/3f2nC4b
Banggood: www.banggood.com/custlink/v3K...
Servo Mount:
Amazon: amzn.to/33jdzVL
Metal shocks with shock mounts: amzn.to/3p2y55d
Metal suspension links: amzn.to/3p1tZdC
2.5mm hardware kit: amzn.to/3F5AnpW
Metal Axle Kit is still unavailable on Banggood or Amazon.
@cannabisoutlawz Жыл бұрын
Just got a Cr24-1 KM and An RTR for my son. This video was super helpful thanks brother! I had no idea there was a whole WPL community! Thats awesome
@ericsrchobby5180 2 жыл бұрын
Great video, really enjoying this build👍
@ReadytoRunRC 2 жыл бұрын
Thanks! I am liking where it’s going. Glad you are enjoying the build.
@wvflying1626 2 жыл бұрын
You make it look so easy, tear it down and build it back. Pretty dang cool.
@ReadytoRunRC 2 жыл бұрын
Thanks! Sometimes it’s a little frustrating especially when I don’t get all the hardware included with some of the upgrades. To me, tearing down and rebuilding is almost as fun as actually running the rc.
@RustydriftRC 2 жыл бұрын
Great video! I love the WPL trucks. Stock, they are a bit cheesy, but the upgrades are awesome an relatively cheap. The upgrade process is half the fun with many RCs.
@ReadytoRunRC 2 жыл бұрын
Thanks! You’re absolutely right. They aren’t much but it doesn’t take much to make them a totally different RC. I love the whole taking apart and putting back together.
@creativeexperience6388 Жыл бұрын
This helped so much I spent 300 bucks to build a wpl inspired bouncer with the all metal cj bouncer body you can buy
@johnlaurens5252 2 жыл бұрын
just told my friend who loves rc about your channel he watches you all the time now
@ReadytoRunRC 2 жыл бұрын
Awesome!! Thanks for the shout out to your friend.
@mraltoid19 2 жыл бұрын
Dude, I wish I came across your video before I fumbled with mine. I had the EXACT same issue with the wrong servo-tray listing on Amazon. AND it had the wrong screws too! It was a mess, and like you I had m2 screws to use. That looks great man. Keep it up!
@ReadytoRunRC 2 жыл бұрын
Thanks! Yeah this build has been disappointing for how many times I had to put my own hardware in that wasn’t included with any of the upgrades. I’m liking how it’s looking and can’t wait to get it done. The waiting game for the next step is not fun.
@rekik66 2 жыл бұрын
Great video. That rc seems very intricate.
@ReadytoRunRC 2 жыл бұрын
Thanks! It can be.
@growingrcs 2 жыл бұрын
Good looking wpl man!!!
@ReadytoRunRC 2 жыл бұрын
Thanks! I’m working on it now and it’s working pretty good.
@JackOnly21 2 жыл бұрын
Nice video, really helping
@ReadytoRunRC 2 жыл бұрын
Thanks! Glad it’s helping out.
@MightyistheRCGamer 2 жыл бұрын
It looks like it's coming together and it is going to be a beautiful little truck after all the upgrades you put on it
@ReadytoRunRC 2 жыл бұрын
Thanks. I need to get working on this again. I been slacking on content. Winter is being rough right now and takes away my motivation to make more videos.
@MightyistheRCGamer 2 жыл бұрын
@@ReadytoRunRC it's okay because you have a TON of great video's anyways
@ReadytoRunRC 2 жыл бұрын
@@MightyistheRCGamer thanks. Appreciate it. I’m uploading one right now for 6k subscribers. Should be live in about a half hour.
@MightyistheRCGamer 2 жыл бұрын
@@ReadytoRunRC I still tell people about your channel not because I want you to do the same because your channel really is good clean family fun with so good video editing
@rcshandmell4276 Жыл бұрын
Great video
@ReadytoRunRC Жыл бұрын
Thanks for the visit
@Lee-At-Green-Pheonix-Rc 6 ай бұрын
Love these motor and I love them servo and mounts I have in on my 6x6 5kg dump, 4x4 semi tractor unit and I hqv3 5he 370 motor in my lowboy trailer 5o power the axles that hooks into my 4x4 semi to work in tandem
@ramsessilent 2 жыл бұрын
looking beefy!
@IowaBudgetRCBashers 2 жыл бұрын
This is pretty much exactly how I’m gonna build my c14
@ReadytoRunRC 2 жыл бұрын
Sweet. It’s a really easy mod to install. Good luck with your build!
@IowaBudgetRCBashers 2 жыл бұрын
@@ReadytoRunRC just did the 370 mod to my B36 6x6. Really made a difference
@ReadytoRunRC 2 жыл бұрын
@@IowaBudgetRCBashers that motor has so much torque. I was climbing so much stuff I couldn’t climb running the stock motor.
@TheRChobstar 2 жыл бұрын
Nice video bro 🤙🔥 Greetz from a fellow wpl fan- you have a new subscriber 👊😁
@ReadytoRunRC 2 жыл бұрын
Thanks for the sub! This was my first WPL. I will have to mod some more.
@TheRChobstar 2 жыл бұрын
@@ReadytoRunRC you will have alot of fun with WPL, very upgradable
@TheRChobstar 2 жыл бұрын
@@ReadytoRunRC i just dropped a video with the WPL B36 MILITARY truck on my channel, drives like a dream 👊 maybe you can give that one a try as a next project? 🔥🤙
@BEASTMODERC 2 жыл бұрын
Nice video
@ReadytoRunRC 2 жыл бұрын
Thanks
@DelawareRCMan 2 жыл бұрын
Hey man how are you? Sorry I been MIA for quite a while now. It’s been a hell of a time. Trying to get back to normal but it’s just going a little slower than I thought! Love the videos!
@ReadytoRunRC 2 жыл бұрын
I’m so glad to hear from you. I have been wondering how you been because I haven’t heard from you in awhile. I hope you can get yourself back to normal and things speed up for you with your recovery.
@dongrc6022 Жыл бұрын
great❤
@kafinah6359 2 жыл бұрын
nice video...i like it...👍👍👍
@ReadytoRunRC 2 жыл бұрын
Thank you very much
@kafinah6359 2 жыл бұрын
@@ReadytoRunRC welcome
@alexgonzalez7881 Жыл бұрын
Thnx for the informative video, looking to buy a kit and upgrading it. Wondering what type of grease did you use on the gears?
@ReadytoRunRC Жыл бұрын
You're welcome! I used lithium grease in mine.
@lxrcxl Жыл бұрын
Sorry for the disturb, if I want to change from 180motor to 550 35t motor i also need to buy the 370 motor for the gearbox?
@DIFFLOCKERS 10 ай бұрын
Do you need a ESC upgrade for the 370 ? sorry im new to this whole RC thing. cheers mate.
@joshherrman3201 2 жыл бұрын
I've but 4 of these little crawlers and I tell ya what they definitely test your skills and patients. How do you like those shocks?
@ReadytoRunRC 2 жыл бұрын
Yes they do. My SCX24 is so much easier to work on. The shocks are ok. A little stiff. I did move the position of the upper shock mount to the next hole forward on the chassis. With angling the shock a little further, it gives me a bit more articulation in the back. I can't do the same with the front because the tires hit the shocks then when I turn.
@srinivasvaradaraj7784 2 жыл бұрын
Great helpful video, thank you so much. I am just getting into wpls rc. Quick question does anyone know the screw specs for the standoff holes and the power switch holes? My kit didn’t include screws for these and i cant seem to find the screws to save my life. I do know that the wheel screws from the wpl km fit the stand offs but i dont know what the specs are for those either.
@ReadytoRunRC 2 жыл бұрын
I can't answer either of your questions but almost everything on here used an M2 or M2.5 screw. Hope that helps.
@gargermaxpower2408 10 күн бұрын
Nice! Just a question: is the stock plastic transmission of the C24 more robust or at least equal to the MN82 (also stock plastic transmission)?
@ReadytoRunRC 9 күн бұрын
@@gargermaxpower2408 I know nothing about an MN82. Never had one, never looked into getting one, and never researched anything about them.
@gargermaxpower2408 9 күн бұрын
@@ReadytoRunRC Thak you very much!
@DyingMorgul Ай бұрын
Hi!) What did you use to secure the radiator to the engine? glue? double sided adhesive tape?
@ReadytoRunRC Ай бұрын
Nothing. It just clips on.
@cannabisoutlawz Жыл бұрын
I just got the metal 2 speed and metal single speed..dude they are super heavy especially the 2 speed..but it takes away alot of ground clearance and i get high centered alot
@ReadytoRunRC Жыл бұрын
That servo does add some weight to the 2 speed. I haven't really gotten high centered with mine. I mainly get hung up on the differential for the axles. Always having to pick different lines when I'm out crawling some rocky places.
@jwoocrew 2 жыл бұрын
I put this metal 370 in my B16 6x6. The pinion and plastic gears would slip in the stock b1 motor and gear box. With the install of the 370 metal, it seems like it has very low torque but it doesn't have any climbing power? Almost like I need to use a 3S pack instead of 2S. Any ideas? Did you do your run test yet?
@ReadytoRunRC 2 жыл бұрын
I have just tested it on 2s but only on the bench. I haven’t done any real climbing yet with it.
@Anonymous_Valorant Жыл бұрын
Is the motor waterproof? I have that one in my mn99s with metal drive shaft, ordered hobbywing 1060, and dumborc x6dc and a 25kg waterproof esc. With a waterproof receiver box
@ReadytoRunRC Жыл бұрын
motor is not waterproof
@mrkemblegilstrap 4 ай бұрын
I was watching hard because my transfer case came unassembled. Any suggestions? tia!
@RomainGamingLTD 2 жыл бұрын
Do you apply thermal paste to the heatsink on the motor ?
@ReadytoRunRC 2 жыл бұрын
I didn't apply any on this one.
@rockman49er Жыл бұрын
I bought some ebay metal axles and they didn't come with shims and would not work without any and they came with metal drive shafts I've shimed and got them working now my tires rub on the frame and at certain speeds the drive shafts vibrate very badly any suggestions how to fix mine now I also bought the wpl 4 channel upgrade with 2 speed transmission and oil shocks I haven't installed yet
@ReadytoRunRC Жыл бұрын
Yeah shims are a must. Glad to hear you got it going. As for the rubbing and vibration. I can't really answer that. Theres a few WPL facebook pages out there so maybe try and see on one of those. There's a lot of people out there with way more experience on these things than me.
@deejaudible 6 ай бұрын
At what point do you connect the motor to the board? The connector on the motor doesn't match the board, so what did you do?
@ReadytoRunRC 6 ай бұрын
I’m not using the stock board. I added my own esc and receiver. My esc has the same plug as my motor.
@RomainGamingLTD 2 жыл бұрын
And the 9g servo is better then stock??? Currently putting mine back together with all the new parts, metal upgrades and wanted to know if the stocl servo or 9g will work.. or do I need to wait and get bigger servo (17-18g)
@ReadytoRunRC 2 жыл бұрын
9g is better than stock but I would go with 17 or 18g. They are pretty inexpensive.
@RomainGamingLTD 2 жыл бұрын
@@ReadytoRunRC Awesome Thanks! I Installed my new Motor, same as yours .. wires all good, driveshafts on.. but front wheels go forwards and back wheels go backwards... know of any reasons to cause this ?? I can't seem to figure it out ...
@mowglippml Ай бұрын
@@RomainGamingLTDis there more than one output shaft from the motor at one side? If so then try the other
@band_siberianhusky 2 ай бұрын
It appears that the 370 motor used the hole that the cover would use. How do you secure the cover? I tried this 370 gearbox on my c24 and the driveshaft was not centered. I had to drill a hole in the frame to center the drive shaft. I was so insecure that I put the work on hold. lol
@ReadytoRunRC 2 ай бұрын
I just used the same holes and had no issues.
@band_siberianhusky 2 ай бұрын
@@ReadytoRunRC Thank you for your kind reply. :)
@foxyscontent713 2 жыл бұрын
Do I glue that blue engine part on the engine?
@ReadytoRunRC 2 жыл бұрын
No it clips on. You can glue it if you really wanted to. Personal preference I guess.
@donaldhenke2750 2 жыл бұрын
it also needs spot for on/off switch
@ReadytoRunRC 2 жыл бұрын
It doesn’t have an on and off switch anymore which I cut off and soldered the wires together in the next video I made.
@maciejmikitow7705 2 жыл бұрын
Damn i am so scared lookin at the final result - the motor axle that goes into front axle is really long and it is not supported by any hub or any other kind of upholder. Would it get broken by that? By the tension itself?:(
@ReadytoRunRC 2 жыл бұрын
I haven’t had any problems with it yet. But I only ran about 3 batteries through it so far.
@ginomarcobundang6018 2 жыл бұрын
Hello sir, can i use that kind of servo and 370 motor on stock wpl c24-1 electronic?
@ReadytoRunRC 2 жыл бұрын
Not the servo, it's a different plug than the stock receiver.
@zachnichols3804 Жыл бұрын
Why did you pick single speed over 2 speed just wondering?
@ReadytoRunRC Жыл бұрын
Cause I just want to do crawling with it. I don’t need a faster speed.
@MrKbreeze4200 2 жыл бұрын
Did you have to swap out the connector? Mine came with a female but the stock one is a male.
@ReadytoRunRC 2 жыл бұрын
I did not swap out connectors. How you see it is how I got it.
@orangkreatif3614 Жыл бұрын
ayolahhhh
@Leo_Cr 6 ай бұрын
Does that engine work with stock wpl transmitter?
@ReadytoRunRC 6 ай бұрын
If you plug it in to stock receiver.
@AzPoorBoys 9 ай бұрын
Which battery are you using? I have a stock truck and want to upgrade
@ReadytoRunRC 9 ай бұрын
Ovonic 2S 1000mah lipo. Product link is in video description.
@AzPoorBoys 9 ай бұрын
Sorry, I swore I looked for it before I commented ha ha
@ronkemp9528 2 жыл бұрын
What kind of drive time do you get with the stock yellow battery.
@ReadytoRunRC 2 жыл бұрын
About 15 minutes.
@ronkemp9528 2 жыл бұрын
@@ReadytoRunRC Thanks
@RomainRacing 2 жыл бұрын
This May Sound Strange... but I installed everything, went smoothly.. but when I have my Rear Drive Shaft On the Lower it spins opposite of the front .. when I put it on the upper, it is correct.. do you know what would cause this to happen?
@ReadytoRunRC 2 жыл бұрын
Sounds like your axle is on upside down. Flip the one axle around and it will all spin how it’s supposed to.
@RomainRacing 2 жыл бұрын
@@ReadytoRunRC Woowie, blonde moment much for me eh 🤣 thanks lol, soo thankful to have nice/helpful people like yourself
@ReadytoRunRC 2 жыл бұрын
@@RomainRacing I’ll help when I can. I only know this because I did the same thing. That’s when I noticed the axle was on upside down. Flipped it over and all was good. Good luck with the rest of your build if you’re doing anymore and thanks for checking out my video.
@RomainRacing 2 жыл бұрын
@@ReadytoRunRC Sometimes I make myself wonder lol, one more quick question.. I know it's meant for 4 or 6 wheel drive, but is there I power/speed difference that you know of between the 2?
@RomainRacing 2 жыл бұрын
@@ReadytoRunRC Deffinently and thanks again and forsure, still waiting on Spacers n wheels, and upgrade ESC, Receiver, Control etc going all out lol..
@justchillin1759 4 ай бұрын
Can i keep the stock servo and only upgrade the Motor with stock battery?
@ReadytoRunRC 4 ай бұрын
I’m pretty sure you can.
@justchillin1759 4 ай бұрын
@@ReadytoRunRC okk thxx
@TW39 6 ай бұрын
Can a 380 brushed motor fit on the gearbox
@ReadytoRunRC 6 ай бұрын
It can, the mounting holes line up but the motor shaft size is different. The 370 has a 2mm shaft and the 380 has a 2.3mm shaft.
@TW39 6 ай бұрын
@@ReadytoRunRC can I cut the shaft down 2 a 2mm shave it
@ReadytoRunRC 6 ай бұрын
@@TW39 you have to cut it down because the shaft on the 380 would be too long. The shaft on the 370 is really short to fit in the gearbox. You still would have to figure a way to put the pinion that’s on a 2mm diameter shaft on a 2.3mm diameter shaft.
@Anonymous_Valorant Жыл бұрын
What shocks? The link
@ReadytoRunRC Жыл бұрын
Every link you need is in the video description.
@Murwillumbah_Motorized. Жыл бұрын
What esc r u running
@ReadytoRunRC Жыл бұрын
Just a cheap amazon one. Link in description.
@nltme 2 жыл бұрын
pls can you try the team associated SC28 it a 1/28 scale rc car
@ReadytoRunRC 2 жыл бұрын
Yes I plan on having a few of those on the channel soon.
@Haba_kiri 2 жыл бұрын
1
@Friskee62 9 ай бұрын
You could do without the annoying music...
Pashka_500_
Рет қаралды 1,2 МЛН