Write structural Verilog HDL models for 4-bit binary adder and subtractor ||

  Рет қаралды 998

Maharshi Sanand Yadav T

Maharshi Sanand Yadav T

Жыл бұрын

#4BitAdder
#4BitSubtractor
#DigitalLogic
#BinaryAddition
#BinarySubtraction
#DigitalCircuits
#ComputerArchitecture
#LogicGates
#HardwareDesign
#ArithmeticLogicUnit
Link = www.tmsytutorials.com/4-bit-b...
A 4-bit adder cum subtractor is a digital circuit that can perform both addition and subtraction operations on 4-bit binary numbers. It takes two 4-bit inputs, A and B, and a control signal, which determines whether the circuit performs an addition or subtraction operation.
Here's a description of how a 4-bit adder cum subtractor can be implemented using basic digital logic gates:
Inputs: A (A3A2A1A0), B (B3B2B1B0), and control signal C.
Carry-in and Borrow-in: Initialize two input signals, C_in and B_in, to zero.
Full Adder Circuit: Use four full adders to perform addition or subtraction of the individual bits of A and B.
a. For each bit position (0 to 3), perform the following steps:
Connect the corresponding bits from A and B as inputs to the full adder.
Connect the C_in signal as the carry input to the full adder.
Connect the output carry (C_out) of the full adder to the next full adder's carry input (C_in) and the B_in signal as the borrow input.
Connect the sum output (S) of the full adder to the corresponding bit position in the output result.
Output Result: The sum outputs of the full adders form the 4-bit result of the addition or subtraction operation.
a. If C is set to 0, the circuit performs addition. The result is the sum of A and B.
b. If C is set to 1, the circuit performs subtraction. The result is the difference between A and B.
Carry-out and Borrow-out: The carry-out (C_out) of the most significant full adder represents the carry or borrow generated during addition or subtraction.
a. If C is set to 0, C_out represents the carry generated during addition.
b. If C is set to 1, C_out represents the borrow generated during subtraction.
Overflow Detection: Check for overflow conditions when performing addition or subtraction. Overflow occurs when the sum of two positive numbers yields a negative result or when the sum of two negative numbers yields a positive result.
a. For addition, if the carry-out (C_out) of the most significant full adder is different from the carry-in (C_in), an overflow has occurred.
b. For subtraction, if the borrow-out (B_out) of the most significant full adder is different from the borrow-in (B_in), an overflow has occurred.
That's the basic description of a 4-bit adder cum subtractor. This circuit can be expanded to handle larger numbers by adding more bits and cascading additional full adders.
Facebook: / tmsy.tutorials
Instagram: / tmsy_tutorials
Website: www.tmsytutorials.com/

Пікірлер: 2
@maharshisanandyadav
@maharshisanandyadav 4 ай бұрын
www.tmsytutorials.com/4-bit-binary-adder-and-subtractor-verilog-code-for-4-bit-binary-adder-cum-subtractor/
@maharshisanandyadav
@maharshisanandyadav 19 күн бұрын
www.tmsytutorials.com/verilog/
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 124 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 11 МЛН
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 3,7 МЛН
Full Adder Implementation using 4 to 1 Multiplexer: Designing and Circuit
11:44
4 bit binary adder
6:28
Aasaan padhaai
Рет қаралды 183 М.
Half Adder
5:10
Neso Academy
Рет қаралды 1,9 МЛН
4 BIT RIPPLE CARRY ADDER USING FULLADDER IN VERILOG USING XILINX
9:55
Signals. I spent 2 years to understand this part.
21:24
kimylamp
Рет қаралды 206 М.
Easy Science project working model 😇👍👍
2:34
RR techs
Рет қаралды 7 МЛН
Full subtractor on breadboard
12:07
DPV TECHNOLOGY
Рет қаралды 57 М.
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 124 МЛН