Buy me a coffee? www.buymeacoffee.com/diytechnician Buy me a coffee? www.buymeacoffee.com/diytechnician Forgetting standard house maintenance items can be costly. Avoid this by using my homeowner's and renter's quick reference:
www.diy-technician.com/product-page/handy-homeowner-s-checklist In my "Raycial Brand Laminator Unboxing and Review [Raycial Brand Laminating Machine Unboxing & Review]" video I take you through the process of setting up and using this nice piece of equipment. If you are looking for a low cost yet high performing laminator than look no further. It comes with various sizes of laminating sleeves which is really nice. Thanks for stopping by my and channel and checking out my videos.
Here's the transcripts:
hey everybody got this racial hot laminator these guys sent me to do an unboxing review on so let's check it out check it out here's everything that came in the Box got the laminator the power cords already attached got this thing and then we've got a bunch of different size uh laminate sheets I don't know if you can see it but it came with small ones some more medium sized ones the next bigger size up and then some big ones like this okay just to go over the seven Parts on this thing you've got down here this this is the inlet and you've got here the ready and power indicator that's the ready power and of course the switch there is for cold laminating off hot laminating now you can feel when you turn this on it's buzzing in there
and then uh back here with this abs and the outlet the outlet is back here is right there so you basically Ascend the thing through and it comes out the back and then up here this piece is the cutter so you can trim up your laminate piece now whatever piece you want to laminate you grab the appropriate size pouch for it
and grab one just for fun I'm going to go ahead and laminate this now for our purposes today you could either do cold laminating or hot laminating like I mentioned before if you're going to do cold you're going to need a pouch a special kind of pouch with an adhesive on it which is not included with this kit
go ahead and laminate this all I do is just pull pull the sheet apart slide it in put it back together and put that on hot and let it warm up till it says ready
it takes about 60 to 90 seconds for it to become ready for hot laminating okay while this thing's warming up the seat the side that you want to insert in there is the the side not this side you want to insert the sealed side first so it goes in like that put it on this way it could jam up here get caught on the paper there
okay this thing's ready to roll
now this thing's kind of hot when it's coming out the back here so we let it cool off for a minute before we go put my fingers all over it
sometimes what you can do too if there's crinkles in there is just set a book on it to flatten it but in this case we don't need to it's actually nice right now so what we can do now is trim up the edges
it's kind of nice you can you can line this up with your with the Grid on here so you can make sure that way you're not sitting in there like that or even a little bit you can line it up straight and cut the same amount off of each side that we would like to do
go ahead and square it up there and we cut it you get a nice flat Edge and then do the same with this side
square that up
and I'll go ahead and turn this off for now
go ahead and cut it
thank you oh one last thing this tool here this is a corner rounder so you can take your your edges that are that are at 90 degrees there and put it in here and it'll it'll round it for you
so make a nice round corner sweet do that with this one
there we go I could have done a little bit better on my trim job I can go back and even trim it down some more I took and trimmed it up a little bit more I'll go ahead and round these Corners too
better