Thank you for this, just received my X56 (defective from ebay). Had to replace one of the potentiometers as it was broken, was a quick fix and calibration after.
@Piotes Жыл бұрын
I know its old comment but can you give me potentiometer params?
@simonwallace6994 жыл бұрын
Really kind of you to post that video and help others out. I stumbled onto your video whilst looking for X56 throttle teardowns - I don't have the same issue with my X56 - I get constant ghost presses so I'll be pulling mine apart too.
@MANGO-md8yy4 жыл бұрын
What kind of ghosting do u have thou
@MyFlightTV13 жыл бұрын
My roommate fixed the ghosting problem by getting a USB 3.1 hub and hooking the X-56 up through that to his PC. No more ghost button presses. Don’t have to take anything apart.
@MANGO-md8yy3 жыл бұрын
I acually found out recently that I plugged it in a USB 3.0 hub and ghosted but when separated on the pc and hub it works its also the power that is being supplied
@maverickmj3 жыл бұрын
Thanks. Yes, I thought it was a hardware problem, not a software problem. Simple work, and how effective. Tomorrow I am dismantling my throttle and doing a correction. Thanks for the video.
@MANGO-md8yy3 жыл бұрын
Just be careful the greece is very sticky wear some gloves
@maverickmj3 жыл бұрын
@@MANGO-md8yy Yes I know. I already undressed once, as soon as I bought it, to get a little bit of this grease, because the throttle was too hard. Thanks.
@danielpiazza51953 жыл бұрын
I have the same problem but just with my stick and I’ve already opened it and idk why it’s messing up bc nothing inside is messed up
@MANGO-md8yy3 жыл бұрын
I don't have any idea how the stick would have deadzone or unless its in the software from Logitech for the x56 try that. What game are you trying to play with it?You can also put your own deadzone in the software maybe that ? Hit me up on DISCORD PM me at Mango#6689
@muniemoo4 жыл бұрын
The pot is either wore out or is dirty. My guess with the amount of grease in there is that it is just dirty. Go get some electric parts cleaner from a automotive parts shop and spray it in the pot.
@MANGO-md8yy4 жыл бұрын
The gear was put in a negative state from the rotation the throttle is going so by the time I hit 50% it would stop so i just moved the gear back and it worked not good at explaining sorry
@o7StarCitizen8 ай бұрын
which grease oil should we use?
@MANGO-md8yy8 ай бұрын
I wouldn't know you can probably find something for toy Greece cause it is plastic and bits of metal or regular Greece for other car used lol I wouldn't know tbh but it's your call on this. Good luck but just be sure to do research.
@trucmuche25238 ай бұрын
OK and finally the 2 axes are hall effect magnetic or simple pot?
@MANGO-md8yy8 ай бұрын
I'm not really getting your question are ypu able to elaborate on it more please ?
@trucmuche25238 ай бұрын
@@MANGO-md8yy i'm asking (sorry for my english) if the throtle axis are made with trim resisitive pot OR, wuith the new hall effect sensor that use a magnetic field. the second can live many years
@MANGO-md8yy8 ай бұрын
@@trucmuche2523 thier just gears inside from what I seen dn I thinks it's the magnetic but I could be wrong I haven't opened it back up in years 😅. Hopefully this helps and no need to be sorry bro you good
@trucmuche25238 ай бұрын
@@MANGO-md8yy thanks a lot, i'll open mine wher it comes ;-)
@MANGO-md8yy8 ай бұрын
@@trucmuche2523 I wouldn't open it see if the axis are good and even so if possible return it I took a risk at opening it but do what you must or what you want bro this is just an educational video hopefully it helped
@Aphelion792 жыл бұрын
Don't do this. Just do a HARDWARE recalibration. Google the steps, it's super dumb and requires you to hold down some switches, plug it in, hit a few more key combos and it'll flash the LED lights. Then you move the throttle through its full range, unplug, replug and BAM it's fine now!
@MANGO-md8yy2 жыл бұрын
Damm I wish I knew that lol. I made a whole video about it
@MANGO-md8yy2 жыл бұрын
Thank you very much I'm going to look into that now once I get a chance
@Aphelion792 жыл бұрын
Lol sorry man... BUT now I'm experiencing a physical "creep" to full throttle due to the weight of the device. Seeing as you've been inside, got any ideas for that? It happens even when the resistance knob is tightened down.
@Col00Hague10 ай бұрын
do you not have ghost imputs issues ?
@MANGO-md8yy4 ай бұрын
No not really this unit has help up even till now yes I think like 2 of the switches on the throttle have stopped working but I worked around them now other then the throttle issue nothing much at all the rest work fine so fare ohh almost forgot the stick side button sometimes has issues where I have to find the sweet spot but mind you guys this unit has been through about 3000 hours of DCS flight multiple modules even choppers so all the switches and buttons are being used
@AOD_Dark Жыл бұрын
Its becuase of the gears. perhaps rough play or extended use can cause the teeth to ware down or skip causing the ghoasting effect. logitech should really do shit better. make this part of the throttle more on the quality side, metal gears perhaps.
@MANGO-md8yy Жыл бұрын
i got it new like that i didnt even use it that long maybe a week but yeah logitech should work on quality control
@MANGO-md8yy Жыл бұрын
I still have it to this day and still works perfect except for a few buttons but other then that 180 well spent for last 2 or 3 years
@milordas3 жыл бұрын
i just noticed mechanic inside is crap of sh1t
@fatpie84492 жыл бұрын
the x52 rhino is shitty, though i owned it, somehow logitech's stuff feels shitty to me.. i have jumpy rudders, throttle, and the rotary knobs. my stick's side thumb (mini-stick) is also jumpy.
@einarabelc53 жыл бұрын
Please don't post in vertical mode. We're looking at other details. Thanks!
@MANGO-md8yy3 жыл бұрын
Sorry about that I know but didn't realise until I actually posted it lol
@CapStar3622 жыл бұрын
please dont tell people how to post their videos, if its vertical and you watch it on another phone, even in full screen it works just fine. Cannot stand you people who whine about vertical to landscape, not everyone watches a video at a work bench on a PC or Laptop.
@601.JoinAirWing Жыл бұрын
Hello. Is anyone here?
@MANGO-md8yy Жыл бұрын
Sup
@601.JoinAirWing Жыл бұрын
@@MANGO-md8yy My X56 started having a problem with the throttle axes and now it jumps straight from 0 to 50 and then smoothly to 100. Don't know what is going on?
@admin.ChristianoGaio2 жыл бұрын
Bom dia, boa tarde, boa noite Comprei no MercadoLivre um Logitech X56 H.O.T.A.S. usado e ele apresenta um problema que muitos jogadores de DCS que o tem relata o mesmo problema dele acionar vários botões ao mesmo tempo SEM os tocar e isso é muito ruim no jogo, onde ele desliga a aeronave se você programa algum contactor (botão de pulso) para ligar a parte elétrica da aeronave, um outro para o trem de pouso e assim por diante e ele do nada em solo acionar para recolher o trem de pouso e danificar a aeronave ou desligar a mesma.... Não consigo resolver o problema e fiz uns vídeos do tal problema porem ficou sem áudio por eu não saber me gravar, gravar a tela e o áudio junto.... kzfaq.info/get/bejne/nMuGqNdilbbHgYE.html kzfaq.info/get/bejne/d86CYLR729_XZ3k.html