Clamping the edge banding with the wedges.... Superb! Will steal that idea!

Cut the roller off your limit switch, that might get you close enough to the "origin"

I can't speak for all but I think the review was very honest. Maybe it wasn't your favourite video but your feedback was great.

I think a follow up video in a month or two when you used the Xcarve a bit more might be a good idea.

The bar clamps with wedges is genius!

Thanks for the honest evaluation of the X Carve.

I love the german obsession with precision

I appreciate honest reviews which include the bad as well as the good. I agree with you about the power plug. They should include the proper plug if they are going to sell to an international market. Like others here I like the sanding block idea and plan to make some. If I come up with a tool free design I'll post it here.

I wonder why no one else has seemed to mention the limit switch/origin issue? Looking forward to seeing what you use the motor for. Thanks for the video.

oh, this really (!!!!!!!!!!!!!!!) big invention regarding the sanding blocks !!!!!!!!!!!!!!!!!!!!!!

I had similar problems with it not working after it was assembled and slow support replies on my Shapeoko build. Time consuming and very frustrating when you are trying to get it done for a video.

The more I see you use that new table saw the more I like the design of the sliding table on it

awesome idea for the sanding blocks.

Your sanding blocks are easily fixed with a bit longer screw with some sort of knob and it would probably hold together just as well if not better. Granted the knob may get in the way from time to time but you can always replace with the original screw and now that problem is solved too. That block is a very clever design...

I like your sanding blocks and recalled you mentioning you wished they were tool free. I would probably try using a t bolt and make a aluminum or brass cam lever that lays flat in a groove routed into the top of the block and assuming there is enough room drill a recessed area where the base of the tbolt comes through for a spring to fit. Probably going to try making some of those sanding blocks with the mentioned changes.

nice idea for clamping edge band i probably will use it soon :-)

subtle tease -- buying a motor, but not telling us what for!

Love your videos, thanks for putting your time into making them!

Thanks for mentioning the other faults with the Xcarve. Maybe they will improve their customer service emailing and power plugs before shipping more of them to Europe. Very nice find on the motor. The stand and the handle are something we don't see much over here. Nice that your father lets you use his pool room to do woodworking (haha I know he does also). That TS is "vunderba " (excuse my poor deutch"). You might consider putting some pads on the pieces that go on the underside of the new assembly table/xcarve table. That pool table felt and those rails damage easily and will definitely mess up a good shot.

On your sanding blocks: I wonder if you could use rare earth magnets. You could mount opposing sets, being sure that one side is recessed so it could not slide.

Thanks for your honest opinions and for another awesome random stuff video :)

good review, i really like your out takes (funny).

Great video! And "Having me helping myself" made me laugh! That was cool video editing. :D

You can look from another swith on Digikey matching you needs, perhaps moving to smaller proffile or different mounting points. The x carve electronics looks a bit ghetto. The led blinking and fan blowing when you move the stepper .... yeah, a current return confirmed. sure they take in account. Like flashing the controller =)

hey Marius a tip for cutting with ur table saw lower your blade so the teeth just like half a centimetre above workpiece it will make cuts smoother and easier ur blade so high means when you push workpiece through it gets teeth in the beginning then just metal and teeth again make it so it's all teeth its safer too! have a nice day Liam

always waiting for another of yours posting. .. keep it up ☝ 👍👏

Put a new, blank backer board on it, mount a pen on the spindle and have it draw you a new zero point and grid.

You're doing a great job keep up the good work

I love the tablesaw

Du könntest bei den schleifböcken Bolzen mit mit diesen "Rädern" hinmachen

Hast du mal daran gedacht die ganze Platte mit samt X-CARVE vieleicht an die Decke zu heben? Das wäre mit einer Seilwinde oder einem Rollladenmotor realisierbar und die Platte könnte man von unten mit LED Licht bestücken und so die Funktion des Pooltisches behalten.

i think people like your x-carve review because its realistic, too many reviews on youtube giving praise where it doesnt deserve it. personally i wouldnt buy one but a lot of reviews have been carried out by folks with no experience in CNC, so they are not giving an informed comment.

I recognise a motor from a Lidl water pump (great idea to get a cheap motor) Bill

You are right! i speak finnish.

I had the same problem with plug even if I bought EU version of Shapeoko 2. They said me, they don't have cord with EU plug. But I can't say anything bad about their customer service. You should count that we are in EU and there is pretty big time difference between us and USA.

a second switch is always tricky :-)

Is the new motor for a new machine or your drum sander? I think you mentioned that it was under powered.

You can share the plans of sanders blocks please. Nice channel good vídeos.

The handwheel issue.. No. There is NO protection. If there were, the LED's and fan would NOT turn on. That shows that you ARE inducing current, and it IS reaching the arduino / gshield.

Maybe people think your XCarve review was good because it was honest. I'm having all sorts of issues with mine. Not happy with my purchase at all...

Can u do a build vid for your sanding block 😀😀

their email customer service is pretty slow. if possible use their phone help line and youll get way faster service. being in germany probably not an option.

Hallo Marius, echt klasse Deine Random Stuff Videos, hast Du mal über eine Shop-Tour nachgedacht? Speziell Dein Drehbanktisch würde mich interessieren, leider hast Du davon kein Build-Video, war wohl lange vor KZfaq. Mach bitte weiter wie bisher...Grüße aus NRW

On your sanding blocks... have you considered earth magnets to hold them together?

For the "origin point"can you not move the plate? if this is impossible, for one reason or another?

Marius, I noticed you don't set your sawblade height on your table saw as it is suggested (that is half a tooth above cutting material height). Is this something you do on purpose for the video to look good? When using the blade guard I also set the height so that the guard almost touches the material. This way the dust extractor is more efficient. By the way, what do you use to maintain your table saw? Mine is 4 months old and looks a lot worse than yours. A lot of scratches and weird colors already.

Not being familiar with different types of motors, could you or someone describe the motor you bought on eBay? Could it be used as a disc sander?

For what have you been searching on ebay for the motor?

Marius Hornberger War der Motor eher ein Zufallsfund oder hast du schon länger danach gesucht? Ich hätte auch gerne so einen, aber finde eigentlich nur neue 100€ aufwärts. Und eine Suche nach "Pumpe" wird wohl in den wenigsten Fällen so einen Motor dabei haben.

Hallo :) Seit so 10 Jahren kaufe ich im Baumarkt eine bestimmte art von Holzplatten: www.bricodepot.fr/images/page_prod_big/6000/6354.jpg wenn ich was baue. lol. Das Problem ist nur dass sobald nur ein Tropfschen Wasser draufkommt bläht das Holz sich genau an dieser Stelle auf um so ein guten halben mm. Jetzt möchte ich damit aber was bauen was viel Wasser aushalten sollte. Was ist den da am besten um das Holz zu verhindern aufzublähen? Und was die Farbe vom Holz nicht so stark verändert..

i live in the netherlands

Very clever Marius. Does you dad do any woodworking?

hi marius geile video!! Wo krigst du eigentlich immer das ganze holz zum drechslen her kaufst du es oder so? LG alex

Hey Marius, ist so ein Motor auch für das Bandsägen Design von Matthias Wandel geeignet?

Dude! Have you only done woodworking for two years? I'm impressed! Your videos are really good aswell! And yes, there are alot of issues with the X-carve! The spindle crapped out on me, but I had another one available. Have you considered upgrading to a real trimrouter, like a dewalt or bosch?

Hey Marius, ich habe fast den selben Motor und will ihn für meine Bandsäge verwenden. Weißt du zufällig wie viele Umdrehungen er macht? Finde dazu nirgends Angaben und vom Hersteller hab ich keine Antwort bekommen... Würde mir echt helfen :D

Those safety shoes look very much like my bare feet!

Have you throughout About time difference

wan kommt endlich wieder ein video die videos machen süchtig marius echt geilllll mach eiter

wenn du das kabel los werden willst sag bescheid. ich nehme es dir ab ;)

2:30 wouldn't it be simpler to just solder European wire?

hi

how did you get that motor for 10euros :'( , youre lucky

You have a t-shirt with finnish word HÄÄÄÄ? What is the story of the shirt?

Does your dad ever borrow your tools?

why are you barefoot at a workshop isn't that dangerous