X-MAN TORNADO V2 M / 13x13 CUBE / GAN SMART TIMER + SKIN Unboxing

X-MAN TORNADO V2 M / 13x13 CUBE / GAN SMART TIMER + SKIN Unboxing | SpeedCubeShop.com

Рет қаралды 1,313,316

2 жыл бұрын

Are unboxings usually this chaotic?
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Products ►
X-Man Tornado V2 M: speedcubeshop.com/products/x-...
GAN Smart Timer: speedcubeshop.com/products/ga...
Timer Skins: speedcubeshop.com/search?type...
MeiLong 13x13: speedcubeshop.com/products/mo...
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
Special thanks to these generous Patrons:
Erika Greggs, Elliot Hargadon, Glenn Koster Jr, Talen, what a nerd, Patrick Flückiger, Eric Kau, Cubing for Eternity, tim rossetti, kubesolver, Ivan Marinkovic, Gregory Martin, Jan Strohbeck, Marius Hjortland, Jared Smith-Mickelson, Finian Mulcahy, Odd3's out, Prajot Singh, royston chow, Steen Lillelund, Thomas Birdwell, Niklas Walzak, Ziggy Gelman, Zack, Seth Crouch, Vini Villeda-Rosa, Will, Klára Németh, Shayan Gupta, Arav Trilokekar, Bruhath B, Chris Bonnello (Autistic Not Weird), Benjamin Force, James Moore, Dmitri Shabes, Skefull, Amay Saxena, Jane Qiao, Philippe Schwartz, Derek Wong, Paddy Duddy, Saulo Sardeiro, Riley Lim, Sean Coetzer, Conner Glover, Nicolas.M, senders, Kibzor, panda_pajama, Khang Tôn, Jay Hoover, kyle, Poor Junior (We All Can Relate), Dominic Klyve, Andy Henline, Bob Brantner, Declan Manning, Michael P Deslippe, Stanley Wesley, Murtaza Azad, Fuzzy Sanders, Cubing Madness, Mark James, Spencer Gray, Tom Blanco, John Adams, RedKB, Csaba Daday, Letin, Chris Cobb, Allan Chochinov, Martijn Schiedon, David Brown, Taco, Mike Sampson, Rob Peters
Music:
sakura hz - chill
Ikson - Horizon
ghostrifter official - sundown drive
Ikson - Walk
Mikel - Relic Song
Mikel - Dark World
Orca Vibes - Gypsy

Пікірлер: 2 000

@CubeForSpeed 2 жыл бұрын

15:55 59:43.28 I guess

@JPerm 2 жыл бұрын

So close!

@IdkAnymoreXD00 2 жыл бұрын

@@JPerm I quit cubing for awhile, should I go back?

@syahmisyairazybinshuhaimi3075 2 жыл бұрын

@@IdkAnymoreXD00 go study i say

@olleh1 2 жыл бұрын

hi cfs

@parpaing_1 2 жыл бұрын

How lol

@Niah000 2 жыл бұрын

Only reason I clicked was to hear a ‘Hope you can read chinese’ and JPerm didn’t disappoint me

@user-kw9pz2wx6c 2 жыл бұрын

For real 😂😂😂

@SeanDaMan_101 2 жыл бұрын

2:13

@zaheen9 Жыл бұрын

HoPe YoU CaN ReAd ChInEsE😂😂😂😂

@Harrytube595 Жыл бұрын

2:13 2:26

@whaym318 Жыл бұрын

🧢

@Cheetahhh 2 жыл бұрын

the little sigh before the, "I hope you can read Chinese" joke LOL

@Me-lm7po 2 жыл бұрын

minecraft youtuber spotted!

@szymonrapacz3946 2 жыл бұрын

@cheetahh Cheeto what's ur ao5???

@wanfaris 2 жыл бұрын

heyo

@skill_ssues3689 2 жыл бұрын

Wait what? Cheetah?

@irian3x3 2 жыл бұрын

why is cheetahh here

@stup9888 2 жыл бұрын

The xman's tensioning system, in my opinion, is beautifully simple and well executed

@aarniebarney6973 2 жыл бұрын

Jperm: “I’m not gonna count it’s definitely 13” Me: proceeds to count pieces on cube

@colleen9493 2 жыл бұрын

Yeah that was me lol

@Luffy_wastaken 2 жыл бұрын

Same lol

@umahhhidontknowanything8542 2 жыл бұрын

yeah me to lol

@sanadawa8292 2 жыл бұрын

2:13 im sure everyone here is done with this joke but hopes it never stops

@mkmkll. 2 жыл бұрын

“Hope you can read Chinese” People who can read Chinese: YOU UNDERESTIMATE MY POWER

@tq6668 2 жыл бұрын

Guess you mean me

@gh0st2c0ast 2 жыл бұрын

Don't try it

@mkmkll. 2 жыл бұрын

@@gh0st2c0ast **jumps** “AAARRGHHHH”

@gh0st2c0ast 2 жыл бұрын

@@mkmkll. *slices*

@mkmkll. 2 жыл бұрын

@@gh0st2c0ast Aahh…. AAAHHH Aah aaahhhhhhrg aaarghh

@SlyFrostPaw 2 жыл бұрын

i got the Tornado V2M recently, and it immediately became my favourite 3x3, i dont really do speed solves so my experience is likely different to everyone elses, but the versatility of all the settings is fantastic

@darrenmitchell183 Жыл бұрын

The smart timer should have a penalty system (DNF, +2, etc.) in my opinion. This would make it far superior over the regular stack mat timers

@fatestarne2694 2 жыл бұрын

Say the line Bart: “Hope you can read Chinese”

@splatzilla6064 2 жыл бұрын

YAAAAY!!!

@dunamisisraeldominisac3629 2 жыл бұрын

WAAAAAAAAAAA

@gillnabiel8385 2 жыл бұрын

Who is bart and is he hurt ?

@yashwantsingh6703 2 жыл бұрын

HURRAHHHHHH

@un_common1483 2 жыл бұрын

Ah yes, the “Hope you can read Chinese” saga continues.

@andytraiger4079 2 жыл бұрын

Reading "Chingrish" on packaging is always fun, I wish they tried to use English. Not that it would increase our understanding of their product, just because it would give us something to laugh at.

@sheikmohammedkhalid9727 2 жыл бұрын

Yes

@caiyuchen6141 2 жыл бұрын

I'm Chinese i can say englisg

@arshmansingh3393 2 жыл бұрын

I speak cantonese

@asansabith.s280 2 жыл бұрын

Hope you can read English

@harrison738 2 жыл бұрын

The tornado v2 is my main, and the settings I use are magnet setting 2nd strongest, in the core: 4 on the outside and 3 on the inside Anyone who has a tornado v2, try these settings, I wanna see what everyone else thinks 👍

@tanikabell1070 2 жыл бұрын

The checkerboard pattern so pretty

@cubeit6922 2 жыл бұрын

"Huh, hope you can read Chinese" Jperm himself is tired of it, but we arent

@stubblycuber2729 2 жыл бұрын

why wouldn't we

@kiwicuber 2 жыл бұрын

I was just gonna comment this lol... so true

@TheSilkySkewber 2 жыл бұрын

I am

@eugeniataraburca9243 2 жыл бұрын

I wish i could meet jperm irl

@pos31don24 2 жыл бұрын

@@eugeniataraburca9243 r u hoping he will just GIVE you a gan cos he won't

@PureZOOKS 2 жыл бұрын

I love going on SCS's "new" section, just to preview what jperms next vid will be

@Citylight-yq8dp 2 жыл бұрын

I actually never thought of that... that's amazing

@loyaleling Жыл бұрын

I love my tornado v2, and the corner cutting isn’t great but if you have the cubers home edition then you can loosen it a bit to help with the corner cutting while the magnet keep it stable

@Sharpie10 2 жыл бұрын

“If it was a gamer skin it would be covered in G-fuel and Doritos” -Jperm 😂

@shadowpheonix7417 2 жыл бұрын

Jperm: "OK I must handle this one with care" Also Jperm: drops everything else

@ninajiang1886 2 жыл бұрын

@ShadowPheonix hello Mr Agoti

@onioncuber2081 2 жыл бұрын

Meilong and Yuxin both want to have J perm's biggest cube theirs

@43Cubes 2 жыл бұрын

*shengshou cries in the corner*

@pravakhanal451 2 жыл бұрын

@@43Cubes yas

@BenTheCuber 2 жыл бұрын

hey you have the same profile as me

@syahmisyairazybinshuhaimi3075 2 жыл бұрын

But yuxin is the biggest not the number but the piece 😂

@jeremyleow 2 жыл бұрын

@@syahmisyairazybinshuhaimi3075 yes, I don't think I can physically hold Yuxin 10x10, meilong is friendlier in this sense

@cryingcrown 3 ай бұрын

IMO they definatly improved the corner cuttig, the adjustment, and more with the v33, my min cube

@itze_ 2 жыл бұрын

That adjustment mechanism looks nice

@JaydentheMathGuy 2 жыл бұрын

Nobody: JPerm: I need to handle this with care. Also JPerm: Drops everything else.

@TesserId 2 жыл бұрын

The tool actually looks cool. Might have to get one just for that.

@countryballsanimationsandm5362 2 жыл бұрын

the 2-thing lol

@youraveragecuber1234 2 жыл бұрын

@@countryballsanimationsandm5362 no the beetle tool

@mohammadshahjahan3075 2 жыл бұрын

Thank you so much for the unboxing of X-Man Tornado V2 M.

@memerboii2157 2 жыл бұрын

When there is a quiet cube or a loud cube on a unboxing vid, he always brings out the tenyun

@yumeyamamoto 2 жыл бұрын

*fun fact:* when you write 'fun fact' in your comments, people read it more carefully.

@monk1e3436 2 жыл бұрын

Tru

@EdbertWeisly 2 жыл бұрын

Yup

@howtonot082 2 жыл бұрын

Exactly

@someguycubing6585 2 жыл бұрын

Facts.

@WasderfulYT 4 ай бұрын

Fun fact: facts

@SamuraiTalkz 2 жыл бұрын

Finally tornado!! I think it's dream

@grizzay4097 Жыл бұрын

The Tengyun v2 sounds a bit more hollow in comparison, and the X-Man sounds more dense. Both of these are good cubes, and quiet as well.

@ubaidillahalaydrus3911 2 жыл бұрын

i got this cube 2 weeks ago and i loovveddddd itttt!!! it was really tight out of the box. but i made springs looser and it feels awesome!

@wildrubikslegokids1242 2 жыл бұрын

I actually predicted he would say "I hope you can read Chinese" this time!

@iceboi8651 2 жыл бұрын

Same

@deepannandy7288 2 жыл бұрын

Me too.

@rexthecuber7203 2 жыл бұрын

I have the Tornado v2 and I recommend the settings: Center travel distance:2 Spring compression:3 Magnet strength:2

@MasterPriyanshu 2 жыл бұрын

My settings- Centre travel distance- 5 Spring elasticity- 5 Magnets- 5 Lube- Weight 5

@pixy3266 2 жыл бұрын

@@MasterPriyanshu hi, sorry to ask that but does your cube make some springs or magnets noises after changing the settings? Mine does and that kinda remove the "quietness" of the cube... One side make spring noise when turning it, and one side make a sound when the layer get align with the others and I really don't know how to remove those sounds... I would love to try different settings without having any problems like this, so If you have any idea, please let me know!

@commanderjarkerthewolf3111 2 жыл бұрын

good but mine is ctd:2 springs:5 magnets:4

@rexthecuber7203 2 жыл бұрын

@@pixy3266 The Tornado V2 has a problem where the magnets make sounds but if u reduce the magnet strength, the sound also reduces, if u really don't want the sound then I recommend lowering your magnet settings, if u r comfortable with lower magnet strength

@pixy3266 2 жыл бұрын

@@rexthecuber7203 thank you for the help! It was really annoying for me, and after testing a bit I came to the same conclusion, the sounds appear only when the layer align, so when the magnet are aligned... I agree that changing the magnet strength reduce the noise sometimes, and that's the solution thank you :) Also I think (that's my opinion) that magnet noise are due to the magnet moving a little of his position when he get dragged by an other one, like he's not completely still and can move a little bit I have sometimes spring noise, but they occur the same way, so I'm pretty sure there is a spring between 2 magnets on an edge, the spring to adjust the tention dosn't seem to have that problem Sorry for that long message, but this is just my findings and thoughts!

@AlisterCountel 2 жыл бұрын

I’d probably say 43 minutes. Once you hit edge pairing, I don’t think it will have a significant time increase over other big ones. It’s mostly just a lot of time for centers!

@sawcheeyong5087 2 жыл бұрын

The factory setting all 3 is tight ，all 2 is the best！

@arjunjain87 2 жыл бұрын

J Perm : "Hope you can read chinese" me : *"haha, he said it"*

@Citylight-yq8dp 2 жыл бұрын

The oldest anarchy server in minecraft....

@zaidalattar2483 2 жыл бұрын

The fact that j perm is increasing 1k subs per day !

@infamous.6194 2 жыл бұрын

Yah I've been tracking that too!!

@olleh1 2 жыл бұрын

@COACHCRAFT44 2 жыл бұрын

He deserves it tho lol

@jeanneb6320 2 жыл бұрын

I say 40 minutes for the 13x13! And I'm so excited for your full tornado review

@Legendz_1Pump Жыл бұрын

The beetle tool can also be used on the Moyu adjustment system

@pll__skip 2 жыл бұрын

“*sigh* hope you can read chinese” never get old

@pll__skip 2 жыл бұрын

@@zohab just steal my comment lol, i actually dont care

@seshanthshyam1468 2 жыл бұрын

@@zohab Legend

@rtsportscenter1454 2 жыл бұрын

Lol your name and profile

@pll__skip 2 жыл бұрын

@@zohab poggers

@bhavikbansal5809 2 жыл бұрын

I want my cube to be a bit loud. As when doing algos you flex even more as people can not see your hand moving but can hear the noice lol.

@nayanapatel4407 2 жыл бұрын

Wow

@akshayannn9627 2 жыл бұрын

Noise lol

@GorggW 2 жыл бұрын

Yes Jperm skin! I'd pay good money for that

@malikajumaniyazova1429 2 жыл бұрын

Good job luck you you're good don't stop being creative

@JaydentheMathGuy 2 жыл бұрын

Nobody: *jperm: uploads 2 unboxings in a row* Me: *EXCITED NOISES*

@cubingtocore7580 2 жыл бұрын

The xman tornado is really good weh you apply some weight 5 or smthg like that which makes it more controllable. It’s epic!

@jherkin8516 2 жыл бұрын

My current best is 20 s PB and a 23 s ao5, I know adv F2L and full PLL and half of full OLL, but I am worried I have rushed ahead with learning and haven’t been practicing enough.

@WolfieNamira 2 жыл бұрын

Finally what I've always wanted, a flat 13x13 cube!

@prakharlal9909 2 жыл бұрын

"hope you can read Chinese" Never gets old

@levitank9510 2 жыл бұрын

I think the 13x13 with only take about 30-35 min yes, it kinda turns easier than the 10x10, and even though it's bigger, 5-10 min is a lot of time :) trust you j perm :)

@possessedbyasymbiote 2 жыл бұрын

My friend, who is a legit non-cuber, got the X-Man Tornado cube, and boy, did he show off. Due to his show off, many people scrambled it out of curiosity and later he would come to me and plead me to solve it. It was a hilarious experience. P.S. I'm a cuber 😀

@salmayeasmensmrity6470 Жыл бұрын

My friend bought a gan and shows it off too but few days later he is pleading for help

@LAmDroid 2 жыл бұрын

had the same issue w the G4 Timer skin with the gaps and misalignment. i stickered the main piece flushed onto the edge and then i used the leftover trim to fill in the sideeitht eh big gap.

@waveyan 2 жыл бұрын

You should try the superflip pattern on the 13x13, it looks insanely good on big cubes!

@negativeD1FF 2 жыл бұрын

You know it's a good day when Dylan uploads

@Cristan_ 2 жыл бұрын

JPERM: THE new YJ MGC 13 x 13 the meilong 13 x 13 was just holding me back

@JaydentheMathGuy 2 жыл бұрын

Hey, JPerm. I’ve heard a lot of beaf about the Tornado V2’s corner cutting issues. A lot of cubers have that out of the box and I’ve heard that a day later, the corner cutting seems to be all fine. I personally don’t have this cube myself, but I feel like your turning style feels more comfortable after a few break ins with the cube.

@youraveragecuber1234 Жыл бұрын

beaf?

@Axsell Жыл бұрын

Logan a vegetarian?

@youraveragecuber1234 Жыл бұрын

@@Axsell no I’m not, I thought it was funny that he said “beaf” not “beef”

@MACubing 2 жыл бұрын

The whole Cubing Community was waiting for this video

@kingchuck7881 2 жыл бұрын

For real

@vVearon 11 ай бұрын

just recently there was an update to CStimer, so you can connect the GANtimer.

@crusted1012 Жыл бұрын

love your videos wish you the best

@gladwintheawesome883 2 жыл бұрын

When you can actually read Chinese: *God level achieved*

@witherwings7772 2 жыл бұрын

I see no god up here other than ME

@rzyr5831 2 жыл бұрын

I can read Chinese

@VKCUBED 2 жыл бұрын

God Mode activated

@phuongnguyenha3169 2 жыл бұрын

Witherwings 777 active in r/cubers server when (I'm rouxfop)

@cubing7276 2 жыл бұрын

@Joseph Zhu same

@CubeForSpeed 2 жыл бұрын

I'm glad that I know Chinese Edit: why no likes lol

@anasjethva940 2 жыл бұрын

Here's the like. 😉

@microwave911 2 жыл бұрын

Yoooooooo

@harishankarr_ 2 жыл бұрын

Can you make an updated speedcube tier list pleaseeee....🙏🙏🙏

@Fiszy_ 2 жыл бұрын

Yay he uploaded whooooo!

@abdulmajidkhan8584 2 жыл бұрын

I have the tornado v2 and out of the box it was really tight then I switched the axis distance to no.2 and the tension on no.3 and the magnet setting on the second strongest setting and It became more controllable and smooth I think you(Dylan) should also try these setting

@tanmayguggilla1346 2 жыл бұрын

Let's be honest we all came for 13x13!!

@Sterlingclub24 15 күн бұрын

No I came for the Timer

@Schmamel11 2 жыл бұрын

Lol Jperm got music in the background! 😂😂

@ashwinideshpande7911 Жыл бұрын

00:41 Jperm: this cube is super quiet Meanwhile the cube: Aaaaaaaaaaaaaaaaaaaaaaaaa

@ultraminer9960 2 жыл бұрын

Dylan: "Hope you can read Chinese." Me, who can't read Chinese: "Impossible"

@mistlistel6433 2 жыл бұрын

@@saeedbutt1955 yeah. Maybe you never bothered with the name thing.

@conserztasfia0078 2 жыл бұрын

@@saeedbutt1955 do u live under rock or something?

@dxmxnz1366 2 жыл бұрын

Jperm today: Unboxing a 13x13! Jperm next week: 13x13 advanced method tutorial Jperm in 2 weeks: How to be sub 1 on 13x13

@itzrodgers7098 2 жыл бұрын

Congratulations on 1 million subscribers 👏

@felicitymckane8853 2 жыл бұрын

sick cubes

@legendaryadx 2 жыл бұрын

You can use cstimer Bluetooth timer feature for connecting it to your cstimer

@gcubing_4064 2 жыл бұрын

I thought it conects only to a cube?

@legendaryadx 2 жыл бұрын

@@gcubing_4064 even I first thought that it is not possible but I saw a review of it from kardtrickkid, in the end of that video the timer was connected to the cstimer

@vpsjdon 2 жыл бұрын

18:00 - For the smart timer, you have to go in the practice mode and select timer. There's an option in the upper right corner to enable or disable the smart timer. You may have to do it a couple of times but once succeeded, you'll start seeing a virtual timer(that looks like the smart timer) on the app. Make sure to do all of this in the non-smart cube mode as well.

@paristsamis7973 2 жыл бұрын

Approximately an hour solve !😅 Great video !

@mateuszsambor5794 2 жыл бұрын

i learned full pll!!! it was worth spending many hours repeating algorithms

@kiansgrosz2962 2 жыл бұрын

14:56 it looks like he is really struggling to move the layers

@ThomasCrossley0912 2 жыл бұрын

Who is soon expecting The J perm x man tornado v2

@ThomasCrossley0912 2 жыл бұрын

@A Perm ya

@SleggIsDaddy 2 жыл бұрын

I like how he us still continuing making vids

@lucasthegamingmaster8136 2 жыл бұрын

Asmr for sure

@Kristano.bananaSuiii 2 жыл бұрын

Me using translator to read the Chinese Chinese people: look what they need to mimic a fraction of our power

@gcubing_4064 2 жыл бұрын

Don't worry, J Perm will fill the gap soon.

@cuberdoge22 2 жыл бұрын

@duffman18 2 жыл бұрын

@@cuberdoge22 spem?

@yfzjrxyocygctjfxzrzyfighxd6492 2 жыл бұрын

17:33 love the time of day

@negativedonut 2 жыл бұрын

Jperm has a andriod. Im happy now

@cardist3144 2 жыл бұрын

I finally finished learning full oll! just kidding i know about 5 😂

@vpsjdon 2 жыл бұрын

I've done the initial algorithm selection and fingertrick practice with all the cases. I KNOW all the algs, I just can't recall which one to apply on which case right now lol. Hopefully soon though, fingers crossed.

@cardist3144 2 жыл бұрын

@@vpsjdon keep going! try practicing with the algs trainer on jperm.net :)

@jonatanrosario9146 2 жыл бұрын

Describe j perm Me: "I hope you can read chinese"

@shots_118 2 жыл бұрын

Nice video man

@kyccubing8725 2 жыл бұрын

Finally the tornado v2

@triprismgaming824 2 жыл бұрын

Jperm: "hope you can read chinese" can we get an F for the people who are new to the channel and thought he was serious for a second?

@omaewanani1407 2 жыл бұрын

“Listen!” says Jesus. “I am coming soon! Happy are those who obey the prophetic words in this book!” Revelation 22:7 GNBUK 💛

@averyparmentier8228 2 жыл бұрын

I got the tornado video while ago I’ve been waiting for him to review it

@silasnm1186 Жыл бұрын

O my God I love your videos

@tobin1677 2 жыл бұрын

I'm on the hour and 20 minutes train personally, I reckon you can do it faster than I can my 11x11

@shrikantgarg1054 2 жыл бұрын

I love this guy

@frenchythebulldog9333 2 жыл бұрын

jperm you are a real big influence to me i want to start cubing that was you that encourge me to make my self push my limits on the cube so please read this comment

@michaelkeyzer519 2 жыл бұрын

Congrats on the 669K subs!

@gopl21 2 жыл бұрын

should I get the x-man tornado v2 with core magnets or without. I’m kind of on a budget so I’m kind of leaning towards the non core magnets

@turtle2494 2 жыл бұрын

I just ordered x man tornado v2 yesterday

@ThePersonWhoAsked69420 Жыл бұрын

the X Man V2 M is absolutely going to be my OH main , in fact , imma buy it rn lol

@ThePersonWhoAsked69420 Жыл бұрын

i got it from the cubicle

@YukinaChan88 2 жыл бұрын

Glad I'm not the only one who found the Tornado V2 super smooth and satisfying, but not great when it comes down to actual solves. I tried breaking mine in with several hundred solves but I'm still not confident with it. Will look forward to the full review to see if opinions change, or if there's a better recommended setup for it!