This is the easiest, simple, free fix for bad steering. Thank you for sharing this.
@jfrc2382 Жыл бұрын
Glad it helped
@Clint_the_Audio-Photo_Guy3 жыл бұрын
I want to know what to do with the post that snaps off.
@Dedmnwlkn5 ай бұрын
Thank you
@johncomito86163 жыл бұрын
I got my Xmaxx two months ago every other time I drive it it keeps blowing out the steering servo’s I put three upgraded 2085X servos in and two months and they keep blowing out every other time I drive it What could be causing this problem
@jfrc23823 жыл бұрын
There could be stress on the Servo, something in the steering assembly might not me smooth, I would just rebuild the entire steering assembly and make sure everything’s smooth and working properly (:
@DrHappythumb2 жыл бұрын
I would also check the servo end point/travel adjustments. You could be over working the servo if endpoints are not set correctly. kzfaq.info/get/bejne/nsdoZ813tKq3c5s.html
@farleftsilencelikenazis10215 ай бұрын
I had the same thing. Blew 2x 2080X upgraded servos and the original I put in as a last resort. The original lasted slightly longer than one of the 2080X U/G one. Not happy. No binding only large circles at speed over a field with 2" high grass. Fitted a savox which has been fine for a long time but it's underpowered. Fitting the perfect pass 56kg one next.
@mohdqaiserkhan71642 жыл бұрын
When I reverse throttle my Wide Maxx, it travels backwards in circles clockwise. Please suggest a solution.
@rctrucks2094 Жыл бұрын
It could be the steering trim
@martinmoran895 ай бұрын
Or the other knob for the gyro
@Xbot4Life5 ай бұрын
You say 16mm screw... thats great but what Diameter? How can i know what screw to get when you dont say the size. Then bolt? What size? you just say get a bolt? lol
@shameless44303 жыл бұрын
Doesn't that basically just make your servo saver ridgid so it has no give?
@jfrc23823 жыл бұрын
I don’t think so, the servo saver screw often comes loose so by using a longer screw and a bolt eliminates it ever coming loose, it still has the same effects as before
@wubbalubbadubdub10503 жыл бұрын
If your screw backs out it’s because you stripped the plastic it screws into and it’s time to replace it. You’ll never beat the hot racing or integy aluminum servo saver upgraded spring and its tightened down like a shock spring instead of using a screw oh and did it mention its all aluminum so you’re not stripping it ever
@farleftsilencelikenazis10215 ай бұрын
No the spring does the work to keep the parts together (unless too much stress in against the servo and in which case the 2 parts separate (the idea of the servo saver is 2 wedges that "fit" pushed together by the spring until enough force is applied)
@wubbalubbadubdub10503 жыл бұрын
Or just buy the aluminum servo saver that comes with an upgraded spring it’s work 10x better than stock no matter what you do and it’s only 38$ you still tighten the spring but the new sling has a higher rate
@ryanloughlin63803 жыл бұрын
where can i find that
@wubbalubbadubdub10503 жыл бұрын
eBay. Amazon Myb. I got it at my local hobby shop tho hot racing makes it definitely worth a try before spending 200$ on a servo but I got the castle 800kv so I’m about to upgrade the servo to a reefs or savox or the promodeler ds930 servo
@BigfootYusuf Жыл бұрын
Lol you miss the point where you do not have to spend any money to fix bad steering. Obviously you can get an upgrade or whatever but that would mean spending more money, but if you can do it for free then why not. All you need is that longer screw and locknut which most people probably already have. Some people just can't appreciate what others share..
@brookekathryn1980 Жыл бұрын
@@BigfootYusuf It's a $1,000 toy truck. Spend $40 if that's what makes you happy. If a 16mm screw makes you happy do that ...
@nathanielgacutan43362 жыл бұрын
What is the size of the screw is it m4x16mm? Or m6x16mm???
@joshc60802 жыл бұрын
M3 x 16mm I believe
@mattvesta5721 Жыл бұрын
Using KT image won’t make your content better, this is a rampant counterfeit.