You are a legend. I’m a young dreaming-to-be pilot and right now I’m learning more and more every day about flying and this video is gonna help so much. Next I’m on to your video about cold and dark starts.

Thank you. This was amazing! I have felt to overwhelmed to even consider trying to get my head around this, and yet in one evening I learned to use Navigraph and SimBrief to plan flights and how to program and use the FMC and AP! Brilliant. You are a legend!

i've watched this video 2 times already. Best video explaining the FMC and Autopilot.

THE BEST ZIBO FMC TUTORIAL EVER!! Love it!! 😀

I've done my first cold and dark start, FMC setup, to autopilot takeoff in one day thanks to your videos, keep up the good work.

Thank you. This is the only video that actually made me understand. I hope you are well, still flying! 😀 ✈️

This has been the most helpful tutorial I have found and I appreciate you for making this :)

Thank you Micah! In depth, very professional but easy to understand. :)

You know you've done a good job when you did better than the actual manual put out by x-plane. So many things they missed. You hit everything. Very well done and put together. A video to study. I thought the autopilot was broke and janky until I watched this and realized it was my lack of understanding. The n1 calculations are a big deal, and what most people miss or gloss over.

Absolutely the best video I have seen to fly the Zibo 737-800! Clear explanations and I now understand how to do an approach using the FMS. Thanks for the excellent video!

I completed my first full flight without any issues because of this video! Tysm👍

Best video which is explaining the FMC and Autopilot ı've ever seen

How good is this Tutorial ....I am watching this video and following on my sim at the same time. I am also grabbing the tutorial video screen trying to look around the cockpit ....duhhh.... Great tut help a lot... many thanks, and keep up the good work

This is what I needed, I've learnt a great deal from this. The zero Alt for example. I needed to understand the AP and FMC links too. Good laid back presentation, oddly relaxing. Thanks.

I didn’t see this video when it got uploaded but I love it!

Perfect tutorial, thanks for you time!

Finally got a 737 up and doing your test route from Vancouver to Seattle right now. For some reason my VNAV isn't working, maybe I didn't put in as detailed a flight plan as I meant to, but right now the flight is going fine. Wanted to thank you for all your help and guidance. I had some difficulty steering the 737 to the runway for takeoff, it's very hard to steer compared to the bizjets. Took some doing. But the takeoff went great, LNAV is working thus far. No warnings or weird stuff so far.

Thanks Micah, I did my first full flight today in X-Plane 11. Vancouver to Seattle.

Thanks! Nice, clear explanation. I've never used an FMC in real life, so it is actually kind of confusing. The GA avionics like the G1000 seem more intuitive to me, but the more I see, the more it does make sense.

Wow thank you so much. You got a new sub!

Great vid Micah!

Very Instructional. Thanks for your effort. Cheers

Thanks! I did my first ever full flight and it was so cool! Keep it up!!!!!!

Thank you Thank You and Thank You. I was having major issues with descend. Now I know to bring it down to 000.

This is fantastic. Thank you.

Great video. Thanks so much.

Brilliant vid. Thanks

thanks a lot!!!!! Great job

Good video I learned a lot now I finally know how to use the fmc. I always got unmotivated when I had to program the fmc 😂

excellent explanations

Perfect tutorial, done the first rnav flight at one go..! Just had to hit the ALT INTV because I accidently put lower altitude than the top of climb. Still need a lot of practice on landing.

Realmente muy buen video, muchas gracias.

I totally agree with first learning how to fly departures and approaches by hand-flying!!! Paramount that pilots understand characteristics of the airplane before hands-off. It is when computers and automation fail is when so man pilots become overwhelmed to manage hand-flying their plane!

Also excellent!

Great video.

Hey man, this is by far the best video i've seen on this topic. Keep up the content. I got one little question. Do you have any idea why theres no little pink diamonds for me?

Very helpfull lessons, tnx

Micah I believe putting in a coroute checks off a lot of things. I use the regular 737 getting ready to use the ZIBO.

Great video. Have you uploaded ILS approach with 737-800 Zibo Mod?

Micah a vast improvement to the video done about a year ago. There are still some procedures that are not by the Boeing book. To verify some correct procedures, watch some Flightdeck2Sim videos he is a real world 737 pilot and a test pilot for Zibo. You can also watch to training videos by Skymatix who has also put out a basic and advanced check list for the Zibo that can be downloaded. He is in communication with Twkster daily from the Zibo team. A good video to help start off with.

EXCELLENT !!!!!

Also, in the Zibo, can you set the post-cruise master alt. for landing minimums, or IAF approach fix alt., or does it absolutely have to be 0000 for the TOD to work right? (You explained it: after you turn AP off before threshold, then you set missed-approach alt. for a go-around, gotcha)

If you go off course and by the time you recover you are already past ROESH, how would you make a later waypoint in the flight plan the “next” waypoint for the aircraft to navigate to so that you don’t have to backtrack? In ForeFlight and Garmin Avionics, there is an activate leg function where you can pick any leg and make it the active leg and then just take up an intercept heading.

Hi and thank you for the tutorials, however, I am still having difficulties in completing my first flight with the autopilot. Although, I believe that I have properly configured the FMC there are still aspect that seem to be missing. AS for the FMC my V1, VR and V2 are quite lower than yours and I have noticed that with ZIBO the tablet displays lower fuel than simbrief Bock Fuel and the PAX also is lower. I have tried to add fuel but given that I initially set up my flight to start with engines the fuel truck cannot refuel until such time as I close down my engines. Therefore my speeds are as follows 112, 113 and 129. Nevertheless I have been able to push engines to 40% before take off and applying the N1 button as per video. but once above 1000 feet when I apply the VNAV and ultimately LNAV and CMD. Either I start to loose speed and crash or the letter A start flashing in the IAS/MACH and I loose VNAV. To conclude not the best times on my end and after reviewing this video multiple times and ultimately having the same outcome Einstein's theory of insanity is starting to kick in (Repeating the same thing over and over in the hopes of a different result) . Well I must confess that my drinking has sky rocketed lol lol lol lol lol lol. Would appreciate any help you can provide in making my flight experience less huuummm frustrating :) Cheers

is there anyway you could make a video on how to set up the navigraph that you talked about

Hello Micah. Thank you for your video. Is it possible to set route to the alternate destination while on the ground? Can't find this information on the internet. I mean both in zibo and in real life. Will appreciate if somebody else answers too.

Hey Micah, when you went manual on the final, were you controlling your speed too with the throttles or are they still being controlled automatically?

Hello, I love your videos, and I have managed to fly to a few places with them but I'm struggling to use Simbrief as my xp11 nav data is out of date. I don't want to pay for an annual subscription to Navigraph, so how do you buy only one nav data (1903)? Thank you! I also would just like to thank you for your amazing, easy to understand tutorials, they have really helped me enjoy flying in the sim :)

Hi Micah, great videos. When I start to program the FMC, pressing Acars & then Atis Req, I then enter the airport press send and wait a couple of seconds, after this I press Atis but I get a message 'no metar data'. Have I done something wrong? Any ideas please?

HI I am a Learner on x plane 11 so I am asking you not, telling you. should you not have the stab trim set up in take off. I always have trouble with this setting the figures on the wheel. another question how do you have all this scenery in x plane. I am having to buy it. and even then I get messages files such and such missing. thanks for the fligh it was great. chas uk

What software do you use to get that flight plan on the left? (and how)

I tried moving up the waypoint in the legs section and it still says route discontinuity. Same for the vector.

Hi... nice tutorial. You said about putting 0 on altitude before TOD but also the cruise altitude must be set before starting the AP? Or de FMC stops at the inserted in FL one? And if I put higher...does the FMC limit it to the cruising altitude programmed in it? Thanks.

Hi and thank you for making such great and helpful videos. I have a problem using the ZIBO mod : the ATIS voice and message doesnt stop coming back. Even if I change comm frequency or even shut down the sound. Do you have any idea ? Thank you

Thanks for this video and all yr additional tips, very helpful. I know there are many other videos but this one was clear and tailored to what I needed. Thanks again, appreciated.-

When I got to TOD the FMC did not start the decent. VNAV was active, and Altitude was set to 000. LNAV working fine. What did I miss?

Thanks for this tutorial. I have a question regarding the flight cruise altitude. May I know where did you get the 19000?

I have this strange issue... While descending, I change the speed in the FMC in legs, but the aircraft won't follow it. It only follows the one that is written in the descend category and I wonder why

Hi - I used Sim Brief to get a flight plan from Toronto Pearson (CYYZ) to Sault Ste Marie (CYAM) and got the following route; CYYZ/15L DCT NUGOP DCT 4519N08153W CYAM/22. HOW do you program in 4519N08153W (which I am assuming is a set of lat and long)?

Is there a way to use the computer keyboard to input info as in X Plane default 737?

Hi. Great video, but I'm confused at exactly what you are doing at the 36.00 mark. You make a change to the V1 or VR? Is that right? If so, why? I'm very new to this :-)

Thanks so much. Would like to know how you set that cockpit view. In mine as I zoom back the seats block the view.

19:58 when use autopilot. put it on :)))) click cmd before lnav

For me in the POS INIT it says not in data base when i type in my ref airport which is essa. I am new to this kind off stuf

Great video, very informative. Can one add altitude & speed restrictions at certain way points along route that autopilot will adjust speeds & altitude with no manual inputs after its already in FMC correctly after takeoff? Or do you still need to keep adjusting Altitude knob along entire route at each way point for Boeing aircraft's etc.

I will watch when i have time thanks very much for your informations

What tells you you've got a RNav route from Simbrief?

22:19 turning knob not do anything. you also need tell it. do it now. change heading not do anything before yell do it now. same goes speed. you need tell do it now. you can dial knobs before do it. lol you dont have altitude hold so fmc descent. unless safety reason. if you not know it you drop like rock when fuel end lol

Hello,i have this problem when i takeoff and fly manually for a bit my autopilot just wont turn on any ideas why??

How do you put the airplane into cold and dark? The plane is always in turnaround state.

why does my zibo mod 737 have a flight config warning and my plane wont move without a noise of this warning

What did you use to have this flight plan ?

Can't set V speeds. I hear the knob clicking as I turn it but no speed bugs appear or move. HSI says No vspd.

I press the n1 limit page on the fmc and i cant get the toga power. Right here 7:24

Hey need some help. Everything is up to par but v speeds don't calculate. Any ideas?

Is this the RNAV approach?

what do you use for your flight plan?

What was the name of the flight plan u use

I noticed that the auto throttle switches are in UP positions correctly but the A/T push knob isn't lit up. Do you not need to push that on? what does that button do anyways?

Hmm, did you disable N1 between cuts (before 21:08)? I'm flying the same route with your flight plan, and copying your actions. A while after reaching 19000 ft (actually it levelled off at 18600, perhaps because I set altitude 0 before the climb finished?) I got a warning because I'm now at 355 knots. I disable N1, but then the plane did a rollercoaster maneuver twice before levelling off at 18160 ft and 279 knots.

pressing N1 during takeoff is not the same as TOGA. Good starter tutorial but there are a few mistakes

Why do the papi lights say you are too high if you are on the approach

So I really need you help. I’m trying to get my zibo mod to work but every time it loads it in there is an insane amount of lag and then my games crashes. I downloaded the exact way you did it and turned down all of my graphics and rendering. I really want to use it but it just lags out all the time. Do you think you know what the problem is?

why do i not have the vrefs? ps i am very new to these type of things

How did you open the flight plan at 11:46 ?

Do you know how to know if I’m on reserve fuel

Wich routefinder you use?😃

where did you get the flight plan that you put in the fmc? great tutorial btw it was very easy to understand

Where did you get that livery put a link pls

Song: Hypercube - Minimal Techno on the Novation Circuit

How does auto-throttle know what speed to go whilst decending and ascending

How do you automatically switch your view to the different panels? Is this a setting in xp11?

when you are at 47:38 in the video you say you are setting 5 flaps at 139 but you don't zoom in so I can't tell what you are doing. I can't tell if you are doing something on the keyboard or physically adjusting the flaps and when you say set it looks like you click something but again I can't tell cause you never zoom in. I'm sure you can see the knobs clearly in you're cockpit but not so much in the video. Great video, just wish you would zoom in more and maybe use a larger mouse pointer

So I have a problem. My fms doesnt do what I told it too. It climbs at only like 1500fpm and the speed never gets to cruise. What am I doing wrong?

Sorry but i couldnt see where you were inputting the vr and v2 values , could you clarify it please thank you

Can anyone help? I have been trying to get zibo 737x to work in xplane11 for months and different problems and bugs keep coming up making xplane impossible to use. I cannot afford £80 for a payware aircraft and zibo seems to be the only solution. At the start of playing plane 11 (mid 2019) it worked perfectly but I didn’t no how to fly I nearly had the hang of the zibo 737 when bugs came up making it unusable. I have reinstalled several times on steam and even reset windows 10 but no luck. I am running out of options!

can someone explain why it doesn't let me to enter the airport?

FMC or CDU display text so small and dark that nearly unreadable, despite full screen view.

OK so just followed step by step again. Everything going well, Turned altitude to 0 before cruising Alt as you say. But now my aircraft won't begin descending according to fmc leg page. All points are filled correctly but it's staying at cruise altitude

How do you know what to put in. Where do you get that info