X3 Inferno Heater Install 4K

Рет қаралды 6,598

Жыл бұрын

Installed Inferno in dash heater into my new 2023 Can Am Maverick X3 DS Turbo base model. Had to change where I spliced into the coolant hoses from the instructions due to having the windshield washer bottle in the way.
All in all it makes good heat and the end product looks nice I think. Wife should be happy with the heat once we get lower and upper doors installed.

Пікірлер: 20

@bobdragich6053 4 ай бұрын

Thanks for creating this great video! We shared a link to it on the Inferno Cab Heaters Facebook page.

@moneycake1494 9 ай бұрын

Just want to let you know, that’s how most ball valves are, if it’s straight in line with the flow, means it’s open, thanks for the video

@icbones 8 ай бұрын

Great video. I'm getting the Maverick XMR. I've got the heater, W/S,top and doors on order.

@Bullyveldt 8 ай бұрын

Nice! What’s your plan for rear window? The can am sight shows the rear window doesn’t work with XMR, but I think from looking at the install instructions on their website that it should work. Or was there another rear window you were going use?

@scottlay5244 Жыл бұрын

Just bought one, it’s being shipped. Really appreciate the video. Good job lining out the steps and sht needing to be removed and how to remove them. I’m notorious for snapping the hidden brackets! One small critique… go easier on whipping the camera from the subject item back to your face to talk. It’s hard on the eyes…not your face😂 …the actual blur and movement of the video 😵‍💫

@Bullyveldt Жыл бұрын

Sorry about camera…was trying to be quick so folks didn’t lose attention. I realized while editing the effect. I’ll keep that in mind in future! Good luck with the install!

@vaughncotton6327 8 ай бұрын

Can I get a copy of your instructions Mine didn’t come with any

@willgerber454 4 ай бұрын

Any update on the way you tan the coolant lines? Leaks does it work as good?

@Bullyveldt 4 ай бұрын

Haven’t had an issue with coolant lines, works well

@Brianw3514 7 ай бұрын

Nice installation! Which windshield do you have?

@Bullyveldt 6 ай бұрын

in this video it is the can am glass windshield with wiper. I have since broken it in a rollover. It has been replaced with Super ATV coated poly windshield which works with the can am wiper system.

@stevelabelle6206 3 ай бұрын

running the coolant line the way you did would you still need to remove the shock?

@Bullyveldt 3 ай бұрын

Nope, I did not have to do anything with shocks since all the cutting and such was under the dash area

@MandoSti 4 ай бұрын

hey man.. your windshield.. it came with two clamps to hold the sides.. howd you installed those. i cant manage to do it. and its kickin my butt.

@Bullyveldt 4 ай бұрын

It’s not easy as clamps are aluminum and I used a pinch and a hammer to slowly knock it out of its clips. It will mark up the clamps unfortunately. Any dirt that got between the clamps from riding make more friction. When I replaced the window I made sure it was all cleaned off, but still needed the pinch and hammer to tap it back in place. It only needs to move about 1 inch I believe to release

@MandoSti 4 ай бұрын

@@Bullyveldt its a pain.. mine they appear they both right side.. they are identicall

@johnelkojr8862 9 ай бұрын

How long did the entire install take?

@Bullyveldt 9 ай бұрын

Did it all in one full day. So maybe 8hours alone?

@bruceramsay8078 9 ай бұрын

What size Jam nut did u use for the accessory terminals ?

@Bullyveldt 9 ай бұрын

I’m not sure the size, but there is a nut already on the terminals, so I reused it. Just the one nut without a second jam nut. It has held for last 1000 miles no issues