Xicoy X45H Turbine Helicopter Engine Unboxing

Рет қаралды 2,981

Күн бұрын

In this we unbox and go over the Xicoy X45H turbine Helicopter engine! This will be my first turbine Helicopter build! I can’t wait to get started!
Want to help support me? Here is my patreon! patreon.com/user?u=86425282&u...
Want to send a one time donation? Here is my PayPal! Choppers992@hotmail.com
Thank you to everyone who supports the channel, your support goes into all the builds and keeps this channel going! Thank you!
Want me to build your heli? Need one rebuilt or setup? Want to send something to the channel? Send me a email!
westhobbiesrc@hotmail.com

Пікірлер: 77

@lucasuk86 6 ай бұрын

Can't bloody wait

@simonsutherland814 6 ай бұрын

Same

@westhobbiesrc8051 6 ай бұрын

It’s going to be an awesome project! Can’t wait!

@hectiky 6 ай бұрын

A turbine would be pretty impractical for me, but the cool factor can't be denied. Regardless of what you put this in, it will be nice to follow along and get a "real" sense of what the setup and ownership is like.

@westhobbiesrc8051 6 ай бұрын

I’ve never built a turbine heli before but many planes. It’s definitely a different type of flying and sound! Stay tuned for the build and flight!

@brodricj3023 Ай бұрын

It's not a secondary compressor wheel, it's the power turbine wheel. The first turbine is connected to the compressor. It's called the gas producer turbine. The hot gases then pass through the power turbine which is connected to the 90 degree gearbox.

@westhobbiesrc8051 Ай бұрын

Good to know! Thank you!

@JJ20371 6 ай бұрын

Nice, we follow also here in Netherlands,

@westhobbiesrc8051 6 ай бұрын

Thank you! Hope your excited for this one!

@HeliShed 6 ай бұрын

Jeff!! Oh my!!! I'm so keyed into this - a life ambition to build a turbine Heli - watching and following with keen interest!! Great video as ever!! Thank you.

@westhobbiesrc8051 6 ай бұрын

Thank you! I’m glad you enjoyed the video! This should be a fun project and can’t wait to get started and fly this thing!

@LichaelMewis 6 ай бұрын

Very interested to see this whole build process and flight performance and characteristics.

@westhobbiesrc8051 6 ай бұрын

I am excited for this project as well! Should be a fun one!

@700sizehelisaretoosmall 5 ай бұрын

Wow that rocks

@FlightLogRC 6 ай бұрын

I think it’s pronounced “sicoy” 😂 can’t wait to see the build

@westhobbiesrc8051 6 ай бұрын

I thought it was Zicoy? But yeah it’s something like that lol

@Maltojo 6 ай бұрын

Oh Yeah! Can't wait to see this thing fired up!

@westhobbiesrc8051 6 ай бұрын

Me either! It’s going to sound AMAZING!!!

@dandorris8531 6 ай бұрын

YESSSS LETS GOOOOOOOO. The smaller of the two comet. I know you ca make it fit.🤣😂🤣😂

@westhobbiesrc8051 6 ай бұрын

That would be awesome! That might be a idea one day!

@fossfix 5 ай бұрын

Can`t wait to see this build really really looking forward to it.

@bobmixon6021 4 ай бұрын

Very exciting. Looking forward to seeing more!

@westhobbiesrc8051 4 ай бұрын

Just waiting on a few parts and I can finish up part one of the build!

@barthutchison4207 5 ай бұрын

I'm hoping for a MD500E myself or some other scale helicopter.

@westhobbiesrc8051 5 ай бұрын

That would be cool! I plan on building a MD500 one day!

@simonsutherland814 6 ай бұрын

Lovely piece of kit 👌🏻

@westhobbiesrc8051 6 ай бұрын

Yes it is! Incredible peace of machinery!

@Myhobbies85 6 ай бұрын

Yes!! I’ve been waiting for a build like this 🎉

@westhobbiesrc8051 6 ай бұрын

This build will be starting soon! Just waiting on some custom parts!

@thelimike 6 ай бұрын

Now I know how to open a boc

@westhobbiesrc8051 6 ай бұрын

Good!

@700sizehelisaretoosmall 6 ай бұрын

So Great mate that Rocks

@westhobbiesrc8051 6 ай бұрын

Thank you! It should be a fun project!

@700sizehelisaretoosmall 6 ай бұрын

@@westhobbiesrc8051 would love to Mount it on my Nano… from my judgement of your Content and my Promo Videos the Nano is ready to do this Step 🤩 Im burning for what Chopper you take on Turbine

@700sizehelisaretoosmall 5 ай бұрын

Some 700 sized Blackhawk would be p-rno mate

@chadkuenzinger4256 6 ай бұрын

Lol, West. The proper description of the 2nd stage turbine wheel and is consider part of the N2 system and compressor side being the N1 system. 2nd stage turbine driving the gearbox and 1st stage turbine wheel driving the compressor. Sorry, lol Ima Helicopter mech so ADHD. 😁😁😁

@westhobbiesrc8051 6 ай бұрын

That is good to know the actual names! Thank you.

@bradfriedman9398 6 ай бұрын

Anything that phallic has to be awesome 😂.

@westhobbiesrc8051 6 ай бұрын

It’s an incredible looking engine! Like art work lol

@bradfriedman9398 6 ай бұрын

@@westhobbiesrc8051 I think it is pronounced something like “Zee-coy” or “Zicoy” ??

@westhobbiesrc8051 6 ай бұрын

@@bradfriedman9398 yes it’s Zicoy

@angrydragon1977 6 ай бұрын

When will you release the build video?

@O-RoD 6 ай бұрын

Zi-coy

@westhobbiesrc8051 6 ай бұрын

Yes it’s Zicoy

@nfavor 6 ай бұрын

Wonder if it will be something scale. It would be hilarious and impressive to see you 3D a turbine.

@westhobbiesrc8051 6 ай бұрын

Hmm! Maybe I will! We will see!

@markma9058 6 ай бұрын

Part of me is hoping you're putting that in a RAW 420 🤣😂

@westhobbiesrc8051 6 ай бұрын

If they made a smaller one I would! This is takes up the whole 420 lol

@kaidok9314 6 ай бұрын

🤣Sonic Booom!!!

@westhobbiesrc8051 6 ай бұрын

That would be cool!

@roberthardy7868 6 ай бұрын

Awesome! Can't wait to see this build and watch it fly. On a side note, I noticed that you seem to be using a Multi Sizes Digital Pitch Gauge lately instead of the usual one used in the past. What is your opinion on this new pitch gauge vs the other one you have been using? 🧙‍♂👍

@westhobbiesrc8051 6 ай бұрын

It’s going to be a really fun and cool project! I have been using and still use the same pitch gauge I have had for over two years now. It’s a cheap $20 pitch gauge off Amazon. Just 3D printed different size holders to fit into the different helis.

@rccosplay3249 2 ай бұрын

Do you have the X45H in stock? If not what is the waiting period?

@robertthorpe2179 6 ай бұрын

A helicopter that has to do with speed.

@westhobbiesrc8051 6 ай бұрын

Actually no! No speed heli for this.

@RobMohamed-zg1ng 6 ай бұрын

Please do a radio setup for the heli

@westhobbiesrc8051 6 ай бұрын

I can definitely do that! Everything will be the same other than throttle and ECU programming.

@karlhines82 6 ай бұрын

You are going to enjoy that turbine… it makes more power than listed. Actually like 5.8hp. I have mine in a MA whiplash and it has 24hr on it

@westhobbiesrc8051 6 ай бұрын

Oh wow! That’s great to hear! I was hoping it made more power! Definitely going to need it! Lol

@chrisgarcia9711 6 ай бұрын

@karlhines82 how often do you have to service it and best way to mix fuel? I currently have a nitro 700 and I’ve been wanting to build a scale with maybe the whiplash 700kit or so you know about the artf king tech 800 size? Thx much

@karlhines82 6 ай бұрын

@@chrisgarcia9711 the service interval is 25hrs but i am going to go until things get noisy on the gear box. For oil i mix at 4% and run power model jet oil or kingtech oil

@richardbartlett6514 6 ай бұрын

Are you getting the miniature aircraft Heli for this?

@westhobbiesrc8051 6 ай бұрын

No, it’s not going in a miniature aircraft helicopter.

@brentwilson2264 6 ай бұрын

Kerosene or diesel, which will you run and why?

@westhobbiesrc8051 6 ай бұрын

We will be running kerosene just because that’s what I’ve always run on turbines.

@LichaelMewis 6 ай бұрын

How is the power to weight ratio compared to a quality electric setup that goes in same 700 size helicopter?

@westhobbiesrc8051 6 ай бұрын

Not great lol it has the power to weight of like a gasser. The biggest issue with turbines and the power to weight ratio is they produce a ton of thrust, but they take a while to spool compared to a Nitro, gas, electric set up. So collective management is very important to keep a consistent power band in flight performance.

@LichaelMewis 6 ай бұрын

@@westhobbiesrc8051 oh ok. I would have thought that the output shaft would be geard off the main shaft and not turning another turbine blade that then connects to the transmission. Seems less efficient.

@westhobbiesrc8051 6 ай бұрын

@@LichaelMewis only issue with that is the main turbine is spinning at 100,000 plus aRPM so they would have to gear the output shaft down a lot.

@LichaelMewis 6 ай бұрын

@@westhobbiesrc8051 yeah and drive that to a reduction gearbox then output shaft for the clutch.