XJ650 Build Part 37 - Motoscope Mini Install

Рет қаралды 32,563

4 жыл бұрын

✩ Patreon - www.patreon.com/JishTL
✩ Instagram - jish_tl
This week I thought id go more technical and cover how to install a Motogadget Motoscope Mini. Once you have got your head round it, its very simple :)
Thanks to Dime City Cycles for supplying this part!
Link:
Any questions regarding how i did this comment below!
Studio Photo Pro: www.studiophotopros.com/
Amazon link: www.amazon.co.uk/Fovitec-StudioPRO-Continuous-Adjustable-Compatible/dp/B00O9RH4HM/ref=sr_1_1?ie=UTF8&qid=1540222612&sr=8-1&keywords=spk11-059
Links to items i use :
Canon 80d:
rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338085233&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FCanon-EOS-80D-24-2MP-Digital-SLR-Camera-Kit-w-EF-S-18-55mm-Lens-UK-DISPATCH%2F132508705079%3Fepid%3D224870678%26hash%3Ditem1eda226137%3Ag%3Ah1kAAOSwB9Fb1Fcs%3Ark%3A3%3Apf%3A0
50mm 1.8 Lens:
rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338085233&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FBRAND-NEW-Canon-EF-50-mm-F-1-8-EF-STM-for-Canon-Black%2F283072963679%3Fepid%3D219511586%26hash%3Ditem41e876a45f%3Ag%3AWygAAOSw-0xYXAOo%3Ark%3A2%3Apf%3A0
DJI Ronin S:
rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338085233&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FDJI-RONIN-S-Camera-Stabilizer-For-Single-Lens-Reflex-Mirrorless-Camera-UK%2F292621075171%3Fepid%3D10020958047%26hash%3Ditem44219342e3%3Ag%3AufoAAOSwK8BbNK88%3Ark%3A2%3Apf%3A0
Gorilla Pod:
rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338085233&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FJoby-GorillaPod-3K-kit-with-ball-head-Bendy-Flexible-Tripod-DSLR-Camera-Charcoal%2F163253733836%3Fepid%3D26006306870%26hash%3Ditem2602ae49cc%3Ag%3AxIYAAOSwV-5bmOKd%3Ark%3A14%3Apf%3A0
Rode Video Micro :
rover.ebay.com/rover/1/710-53481-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338085233&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FMetal-High-Quality-Microphone-Rode-Micro-Video-Compact-Camera-Cam-Stereo-Sound%2F253629222516%3F_trkparms%3Daid%253D555017%2526algo%253DPL.CASSINI%2526ao%253D1%2526asc%253D55148%2526meid%253D2b532b2dde674fd3938bc52ceabe4dd2%2526pid%253D100505%2526rk%253D1%2526rkt%253D1%2526%2526itm%253D253629222516%26_trksid%3Dp2045573.c100505.m3226
Zoom H1 Audio Recorder :
www.ebay.co.uk/itm/Zoom-H1n-Handy-Recorder/273029331847?epid=8013228104&hash=item3f91d0fb87:g:7-UAAOSwcSxaX1Xm:rk:2:pf:0
#CafeRacer #cb125 #timelaps

Пікірлер: 77

@wemel007 4 жыл бұрын

That's a very nice bracket you've got there for the motoscope and the lights! The whole bike is comming together rather nicely! Still like the 2 square headlights too!!

@Oh_Snap_Yo 3 жыл бұрын

Awesome video! Explained everything super well without over complicating things 👌🏼✊🏼

@ponyboy7116 4 жыл бұрын

Great work Jish! This will be saved directly to my cafe build file as I have that same setup. Once again you motivate me to push on with the journey. Cheers!

@callankyree9775 2 жыл бұрын

instaBlaster.

@markfoster6667 4 жыл бұрын

Glad you're back, looking motivated, and mastering those wiring gremlins.

@jishh 4 жыл бұрын

Thanks Marc! Getting there bit by bit

@Suislidal_Tandemcies Жыл бұрын

Great video mate. I have the same motoscope mini. And pretty straight forward. I just have to make a bracket out of aluminum for the speed sensor. And I'm all done as well !

@remotorcycled 4 жыл бұрын

Great vid as usual dude. Looks very neat 👌

@keithmcadamsphoto 4 жыл бұрын

Nice and detailed! Great video!

@Hui9697 4 жыл бұрын

Hi Jish, Although you may be able to tighten the caliper bolt properly as a direct force I think you could find that the side loading of the caliper will cause the plastic to break when braking hard. It's the resistance to twisting by the bolts that allows the brake to work. Otherwise you could use plastic bolts too. If you had radial mounted calipers then this problem is less, that what makes radial rakes a wee bit better. Don't put plastic between the caliper and mounting.

@olrenison 4 жыл бұрын

Sweet. Loving the use of the 3d printed part. It's hard to get those speedo sensors to integrate well. On mine I use the standard speedo drive with a widget that converts it into a digital signal. Works well.👍

@jishh 4 жыл бұрын

Have you got a link?

@nathanpegasus3072 4 жыл бұрын

Heyyy... Ma man back with another video... Always a pleasure watching your video..I love learning from you✌️😁

@TulsaMotoClub 4 жыл бұрын

It's a good channel!

@jwhite3389 2 жыл бұрын

Damn that intro hit different.

@mwtraining4310 2 жыл бұрын

I used the daytona pulse converter for my Yamaha when I installed the motogadget tiny. And it works lika a charm and you get that oe feel. Maybe that works for yor bike to. Daytona makes pulse converters for several manufactures.

@Eight20 4 жыл бұрын

Great video buddy, nice to see another one so soon after the last. I bet you're going to be glad to see the back end of this wiring lol

@jishh 4 жыл бұрын

SO close 😂 i want to do other things now

@KnucklesTvMV 4 жыл бұрын

Hey kinfolk just subbed I found your channel thru Cuz from Dad and Mad cant wait to get caught up on your content kinfolk!🤙🍻

@carltonolson6813 4 жыл бұрын

Simple and clean look👍

@jamesash7368 4 жыл бұрын

When it came comes to the final print what material are you going to use? I'd recommend PETG if your not using and enclosed printer. Also prints are weakest alon the layer lines so if you print that on its side so the layers run along the body you'll have a stronger part. Also 0.2mm layer height, 3-4 perimeters and 20-30% infill will be optimum strength. Edit: Sorry I realized this is me just giving you instructions. This is a really cool bike can't wait to see it finished. Been a fan since the cb125 build, it's awesome to see how far you've come.

@roamingwolf92 4 жыл бұрын

Awesome Josh!

@builtbythehand3902 4 жыл бұрын

Looking ace!

@angrybird29 4 жыл бұрын

crazy build!

@brwhyon 4 жыл бұрын

Looks like it's coming along nicely. I just started a Cafe build up on a 1981 XJ750 SECA, going to try to use the stock tank and lower it an inch in the front to level it out. Will try to put some pix up on my site.

@jishh 4 жыл бұрын

Hey man! Ah nice! Id have done the same but its alot of work 😅

@brwhyon 4 жыл бұрын

@@jishh I have an angle grinder with a cutting disc and I'm not afraid to use it, also been welding for 35 plus years, not my first rodeo ! ! ! You have some great content.

@thebruise 4 жыл бұрын

hi mate great vid as usual, ive walked this path a few times and here is my take, great idea getting the prototype made but id make it out 5mm stainless strip steel (not magnetic) and did you know you can get replacement brake disk bolts where the head is magnetic so it is just a case of taking a bolt out and replacing it with the magnetic one. Vibration is your enemy here and will cause you speedo to be really inaccurate, i wouldnt trust epoxy when i know bolts are available. hope this helps buddy take care Rich

@stuartgreig6609 4 жыл бұрын

Hi, I'll be interested to see if your rev counter works "out of the box". I put a electronic revcounter on my GSX750ES and the signal was too noisy to get a consistent reading. I ended up having to add a passive filter using a resistor and capacitor to clean up the signal to get a decent pulse for the guage.

@harrisdoesthings 3 жыл бұрын

Not sure if anyone else has mentioned but PLA will flex overtime under the sun/elements, great build!

@jishh 3 жыл бұрын

Yep im swapping it out for either an aluminium version or a CF printed one :)

@harrisdoesthings 3 жыл бұрын

@@jishh awesome my dude! PLA is fantastic for prototyping though! Keep up the build (:

@MrAndrew1400 2 жыл бұрын

Great video, thanks. I am about to install a mini on my xv750 project. What did you use to strip the tiny little wires coming out of the mini? Is it a special wire stripping tool? Thanks

@dangoon8741 4 жыл бұрын

Looking good pal

@alancampbell1008 4 жыл бұрын

Nice little solution for the sender...as they say KISS 🙂

@mihalyg977 4 жыл бұрын

Hi! Just a question! Can the brake caliper bolt be tightened with sufficient force via the 3d plastic?

@jishh 4 жыл бұрын

Yep! Being 100% density print it has enough mass to not break up

@mihalyg977 4 жыл бұрын

@@jishh okay! thanks! I have no experience with it! I look forward to the test round !!!🤞

@creativeframesofficial 4 жыл бұрын

That looks so neat! although its really hard to get one here from philippines. And shipping will stab you...

@SimsontunerX 4 жыл бұрын

nice dude!

@jimallen199 4 жыл бұрын

Coming along nicely Jish, just a safety note the bracket for the speed sensor make shore the 3d printed material dose not crush over time as that will cause the caliper bolt to come lose. That would not be a good thing.

@jishh 4 жыл бұрын

Ill most likely locktight the nut to be sure and will have the part printed in a stronger material

@ThaoElden 4 жыл бұрын

I LOVE your videos but they need to be longer they feel so short I want MORE!

@briana.influentialworks5533 Жыл бұрын

The yellow wire to the ignition wire... does that mean the ignition wire thats the same wire running from the ignition on the munit? I hear rev and ignition so im trying to run mine and unsure of the yellow wire

@stevemurray2303 4 жыл бұрын

Like the vids Jish. Have you done your DAS. seem to remember L's on the 125

@yasterwelkin 4 ай бұрын

I have the same bike and same dash. Is your orange wire the one that splits to both coils?

@pacopaco518 3 жыл бұрын

Hello, tengo uno instalado y se a ido a negro, solo me funcionan los led de los intermitentes ,neutral largas y cortas ,pero en la pantalla no sale nada ,q podría ser? Gracias

@StellsBellz 3 жыл бұрын

Well this video is solid. I know I’m late to the party but is there a way to load in the old odometer reading on my old analog gauge to display it on the new mini by any chance? Just so I know how many miles miles are on the bike. Cheers!

@TheTony88 Жыл бұрын

Hi! I'm installing it on a Kawasaki Zephyr 750 with stock wire. The rpm yellow wire from motoscope mini it's need to be connected to the original wire that gives the rpm pulses to the analogical indicator?? I think that the risk to burn the indicator is to connect it to the coil power supply but the original rpm wire is a parallel wire to that. Thanks!!!!

@milanmarko1771 4 жыл бұрын

I have an XJ650 as well and I was told I cannot have tacho as it used to have a cable connected to the engine originally?!

@Poltu.07.Mahadeva 4 жыл бұрын

I lov this speedometer

@jishh 4 жыл бұрын

You can buy one from Dime City Cycles ✌️

@lvlions9 3 жыл бұрын

Great Video Jish! I have two questions for you. We basically have the same set up, M unit blue and Motoscope Mini. Is it necessary to the have the fuse on the red power wire from your m unit aux to motoscope mini? Right now i dont have the fuse wired in and it still seems to work fine. My second question is regarding the yellow tach wire. Last thing left for me to wire and i have no clue where to wire it in. Is it the wire from the ignition coils into the m unit "ignition" slot? Is that what your orange wire is? Thanks!

@caferacercalifornia 10 ай бұрын

Would it work on my 2006 Ducati sport classic 1000?

@bantampop3532 4 жыл бұрын

10/10

@ccavanagh8429 3 жыл бұрын

Hi Jish do you sell or publish your .STL 3Dfiles? If so can I get hold of the Speedo bracket and solenoid holder please?

@TulsaMotoClub 4 жыл бұрын

Homie. Do you do all the 3d design work yourself? I've dabbled but dont have easy access to a 3d printer. I do have access to a cnc shop now though and have been working on my grbl design. I've yet to actually make anything yet though

@jishh 4 жыл бұрын

Hey man! Yep I did it myself. One thing I have tried to teach myself during lockdown. Gotta keep on learning man!

@FDE94T 4 жыл бұрын

Can I ask what software you use for drawing 3d, it's something I'd really like to learn.

@louishockless2590 6 ай бұрын

is the speedometer sensor bracket stl available???

@louishockless2590 6 ай бұрын

i realized its been a while since the video just curious.

@jishh 6 ай бұрын

So sorry dude! I deleted it about a month ago!

@KingstonLaneWorkshop 4 жыл бұрын

I was wondering how soon we’d see the 3D printer in use. Great job

@jishh 4 жыл бұрын

Just can't help myself! there will be many more uses ahead :D

@Poltu.07.Mahadeva 4 жыл бұрын

Can we by this plz Ripley my comments

@eduardoperez7797 2 жыл бұрын

Yep everyone can do it we al have the printer and professional tools somewhere in the garage lmao

@coconutjoe666 4 жыл бұрын

Just remember sunlight will make pla weak overtime

@jishh 4 жыл бұрын

Ill most likely have it remade on my friends machine that can do more exotic materials

@coconutjoe666 4 жыл бұрын

@@jishh get roll of petg, it print like pla but much stronger and sunlight won't effect it

@Poltu.07.Mahadeva 4 жыл бұрын

Hey dud

@fiorellogalluzzo7282 4 жыл бұрын

Nice one. Couldn't agree more on everything being instant and the last 10% taking 90% of the time. One of the things that irritates me is when someone (usually who lives in an instantaneous world) asks how long till it's finished? I feel like replying what comes to mind like, "For f..ks sake, how am I supposed to put a time frame on highly detailed customisation work? It takes as long as it takes" What difference does it make anyway?". I should tell them what they want to hear, " it takes about a day to fully rebuild and engine, 1/2 a day to rewire, yada yada so about 1 week tops from start to finish". Often as you're answering one of the many questions, they cut you off and ask another question (because they can't focus their head for more than 30 seconds on something) like why does that bit have rust on it? Deep breath, does it look like it's finished? Sorry for the rant, hope it was entertaining. Cheers man, keep doing what you're doing.

@riverarhiogill325 4 жыл бұрын

You ok bro? Its look like you've been from sick

@jishh 4 жыл бұрын

Had a haircut

@riverarhiogill325 4 жыл бұрын

@@jishh so your perfectly fine?

@alfredvradenburg2689 4 жыл бұрын

tiny blinkers and tiny speedo. hmmmmmmmmm :/

@jishh 4 жыл бұрын

Both ultra bright and highly visible

@marcuspetford1098 3 жыл бұрын

No direct tach? You're crazy, most important gauge on the bike. Be damned the speed, you WANT to know the revs. Just a small gripe. Otherwise, continue :)