XLT Track Swap and Bog Fix. Vintage Polaris XLT 600 Triple Snowmobile tune up.

Рет қаралды 9,151

Жыл бұрын

We swap Dennis' Track and then fix a bog - twice!
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vE
Oil injection line I use for Polaris: amzn.to/3rMzZYV
Thread Checker: amzn.to/3S0LLKh
#polarissnowmobile #vintagesledders #vintagesleds #vintagesnowmobiles

Пікірлер: 44

@airman6822 Жыл бұрын

My wife was saying the other day, of I had to work on your snowmobile as much as you I wouldn’t ride. As we all know, that’s not what its all about. Great times in the shop! Cheers fellas!

@brianallenfam 7 ай бұрын

My son is working on his triple and had bog issues. We saw your video and doubted that cleaning out the fuel tank and lines would fix the big issue but IT WORKED! Thanks for the video and keep up the good work!

@nuttersspeedshop 7 ай бұрын

Great to hear!

@karsonburth8929 Жыл бұрын

Always love seeing the notifications on how to work on greasy triples I’ve learned a lot from you guys!

@kennethgoin628 Жыл бұрын

I'm sitting trying to calculate how long it would take me to do all the work you guys did together in 2 days. Final answer? Riding another sled until next year. Great job guys!

@velocityinstereo Жыл бұрын

Nice work fellas. I learn something new every time I watch.

@eugenebaroni1298 Жыл бұрын

Great job guys 👍 she's a runner now sounds good.. Have a great weekend.

@lloydscibe3849 Жыл бұрын

Great jog on Dennis sled! Dr. Lonnie was like surgeon at work on those carbs. Dirt never sleeps!

@nuttersspeedshop Жыл бұрын

You got that right!

@joelaichner3025 Жыл бұрын

Buy Blumn Industries Flame Thrower light bulbs , 130 high beam , 100 low beam , Awesome light , single bulb only machines

@alaskarailroad3996 Жыл бұрын

Good job guys. Wix all the way.

@GarageWorx Жыл бұрын

Nice work. Gotta keep at them gremlins!

@scottstrecker9867 Жыл бұрын

Hardly working at working hard 🙂👍👍👍

@emmanueldelescaille731 Жыл бұрын

Awesome job guys

@nuttersspeedshop Жыл бұрын

Thanks!

@larrywarner9314 Жыл бұрын

Nutter I use those glass automotive filters with the replacement cartridges works great compared to those plastic filters .

@jeffcarine9108 Жыл бұрын

I run ripsaw on two of my sleds love them tracks

@coolmamaass Жыл бұрын

Nice work guys very helpful 👏

@nuttersspeedshop Жыл бұрын

Glad it was helpful!

@jeffcarine9108 Жыл бұрын

You guys kick butt great videos my friends

@nuttersspeedshop Жыл бұрын

Thanks!

@WolfofWisco Жыл бұрын

Nice work fixing the fuel issue!

@nuttersspeedshop Жыл бұрын

Thanks 👍

@caddydaddy6728 Жыл бұрын

I'm leaning alot great videos👍👍

@user-dr4ef4ci7e 6 ай бұрын

Very helpful thanks guys

@nuttersspeedshop 6 ай бұрын

Glad it was helpful!

@joelaichner3025 Жыл бұрын

For what I invested in my 700 switchback , I could have bought new top of the line ! Old School is Cool , wish I could put a WEDGE on it ! Had a clear lexon hood on my 1998 XC700 , 220 jugs , psi center dump exhaust , see your motor !

@scottstrecker9867 Жыл бұрын

Best thing I did on my 95 XLT was a inch quarter Trac

@darrylmarbut47 Жыл бұрын

Ethanol in the gas ate the fuel line right off, does it on small engines even worse,my buddy works in tree industry they started having 3/4 month old saws crap out from the fuel n drop the filter in bottom of tank leading to poor running,the old fuel lines in those sleds weren't designed to hold up to that caustic junk.

@IndyGuyRob Жыл бұрын

Way to go guys! She seems a lot happier now! “Make sure you don’t touch the sides” perfect time for a “that’s what she said” joke! Just sayin lol How about the electrical issues? What happened to the Grape Ape? Looks like the temp light came on? Have fun at Triple Wars guys!!!

@jeffnicks2128 Жыл бұрын

What does Brad have in the coffee cup lol ! Great job guys

@joelaichner3025 Жыл бұрын

Oh ? It Bogs ! My brain said boogie wheels , that’s a bunch of money to replace them all plus add the 4th wheel in the back , plus the front skid little wheels for the Wahl Bros drivers , and two extra on the rails , easier on the slides ,

@chrisfrane973 6 ай бұрын

I just got a 200 dollar xlt Xtra special/parts sled on market place lol. Got it going in 4 hours

@nuttersspeedshop 6 ай бұрын

Nice!!

@nateruh3698 Жыл бұрын

great video.what a gremlin i would say

@nuttersspeedshop Жыл бұрын

We're going to have to put some more miles on it to find out if we chased all the gremlins out.

@DavidSmith-tu1nd Жыл бұрын

Hey did you guys add a oiler hole to your block pto crank bearing. Which year did polaris mark the correction. I have 2 xlts and don't want to spin that bearing. I've seen a video where they drilled block and ran a line to the oil pump. They tapped into the pump. Keep the videos coming.

@nuttersspeedshop Жыл бұрын

We bought case halves and oil pump to add the 4th line back when we first put this sled together a year ago. There's a whole playlist on this sled and you can find it in there. I didn't do it to mine or Lonnie's. Seems like a great idea but a lot of XLTs lived long lives without it.

@IndyGuyRob Жыл бұрын

Pretty sure 97 is the first year of the factory extra oil line

@joelaichner3025 Жыл бұрын

200 hours plus into the 700 , dealer labor would have been 20K , good to wrenches and fingers !

@joelaichner3025 Жыл бұрын

If your pulling the drives ! Why not put on Wahl Bros drivers ? I did ! My 1998 XLT gets 13 MPG , slower than my hot rod 2004 SLP Performance Edition & catalog complete Switchback 700 , but that’s 9 MPG ! Slydog skis , 1.25 track , no studs , a snake through the trees where I live !

@nuttersspeedshop Жыл бұрын

Wahl bros drives are expensive and not needed for a trail sled. They are great, but we throw enough money at these things.

@kennethgoin628 Жыл бұрын

@@nuttersspeedshop I hear THAT band playing my tune!

@joelaichner3025 Жыл бұрын

Have ?