XP Deus 2: Silver Slayer Coin Shooting Program

Рет қаралды 9,719

2 жыл бұрын

This is a program that I've been using lately which I've had good luck with. I use it to quickly cherry pick silver coins from heavily hunted parks and other places. It hits coins on edge really well and goes fairly deep in my soil. Figured I'd upload it here incase any of you guys want to try it out.
A couple of notes if using Silver Slayer in version 1.0, 1.1 or 2.0+: Silver Slayer was designed for use with version .71, but can be applied to newer versions with a few tweaks. In the newer versions, a few things have changed. If you're using version 1.0 or later, you may need to tweak your notch settings depending on which base program you choose. For example, in Deep HC, nickels will read 54-59. In the Fast program, they generally read 59-64. If using Fast as shown here, the notch settings in this video should be very close. I suggest setting the first notch to accept 58-64 and the second notch to accept 86+, as coins tend to read a little lower in the newest versions. Finally, the iron volume setting has been changed. If you like to hear the iron to help give hints about possible falsing or good targets mixed with iron, you'll likely need to bump the volume up to 7 or 8, which will be similar to 5 on version .71.
These settings will also work great when using Deep HC as the base program. Just note the notch adjustments mentioned above if using version 1.0 or later.
Carrot-Clips for your Garrett Propointer are available here: MetalDetectingNWGA.com/carrot...
Hip-Clip shovel clips available here: MetalDetectingNWGA.com/hipcli...
Brute Magnetics: The best Magnet Fishing Magnets!
brutemagnetics.com/?ref=Metal...
(Use coupon code NWGA10 to get 10% off your order)
Metal Detecting NWGA T-Shirts available here: Detectees.com
detectees.onlineweb.shop/Meta...
Visit our website at:
MetalDetectingNWGA.com
Our mailing address:
Metal Detecting NWGA
1 Lee St SW
Cave Spring, GA 30124

Пікірлер: 168

@MetalDetectingNWGA Жыл бұрын

A couple of notes if using Silver Slayer in version 1.0, 1.1 or 2.0+: Silver Slayer was designed for use with version .71, but can be applied to newer versions with a few tweaks. In the newer versions, a few things have changed. If you're using version 1.0 or later, you may need to tweak your notch settings depending on which base program you choose. For example, in Deep HC, nickels will read 54-59. In the Fast program, they generally read 59-64. If using Fast as shown here, the notch settings in this video should be very close. I suggest setting the first notch to accept 58-64 and the second notch to accept 86+, as coins tend to read a little lower in the newest versions. Finally, the iron volume setting has been changed. If you like to hear the iron to help give hints about possible falsing or good targets mixed with iron, you'll likely need to bump the volume up to 7 or 8, which will be similar to 5 on version .71. These settings will also work great when using Deep HC as the base program. Just note the notch adjustments mentioned above if using version 1.0 or later.

@stephenpistoia1227 Жыл бұрын

Hey love your program have you adjusted anything since the 1.1 update I just did it and seems to be working different?

@MetalDetectingNWGA Жыл бұрын

@@stephenpistoia1227 thanks bud. No, I decided to go back to .71 for now. I’ve only used 1.1 for a very short time, but wasn’t a big fan of how the ID normalization was changed.

@billlike5194 Ай бұрын

Thank you getting back to me and I do run the 2.0 update. I do use fast as my base program so I will make the changes you recommended. Good to hear you’re still around and you got to love the Deus 2. :)

@benvareen Жыл бұрын

You are one of the good guys when it comes to enjoyable and informative videos. I look forward to seeing whatever videos you will still be making and I'm sure many others will also be looking forward to more of your videos. Thank you

@MetalDetectingNWGA Жыл бұрын

Hey thanks Ben. I really appreciate that. I still upload a video or two occasionally. Thanks for watching and commenting. :)

@dirtdigglerli Жыл бұрын

Love the thought put into this. Just picked up the d2 a couple weeks ago. It's quite the learning curve coming from an equinox. Definitely will try the settings out. Thank you for the video

@MetalDetectingNWGA Жыл бұрын

Thanks Dirt Diggler. Good luck with that new D2!

@MetalDetectingNWGA 2 жыл бұрын

A few tips for using this program: 1) If you’re hunting cleaner ground and want to get a little more depth, you can lower your reactivity to 1 or even 0.5. Slow your swing speed to match. 2) Listen for those very faint yet repeatable “zip zip” type signals. Those are often really deep coins! 3) If you see a mixture of low 90s with the occasional 88 or 89 on the screen, it’s most likely a copper penny. Dimes will usually stay in the 90s. Sometimes deep copper pennies up-average well into the 90s, so no getting around digging a few of them.

@davidfrazier1186 Жыл бұрын

Hi, Thanks..I Found a 1923 Mercer with your setting 😃💥👍

@MetalDetectingNWGA Жыл бұрын

Awesome!

@robbiekramer7547 Жыл бұрын

So I just tried your SS program and I have to say that within a 45 minutes period at an old hunted out park I found a 1958 Silver quarter and a 1919 Silver dime!!! Can't thank you enough for sharing this program with us!

@MetalDetectingNWGA Жыл бұрын

@@robbiekramer7547 Hey Robbie, glad to hear that it worked well for you! Good luck & Happy Hunting!

@Delprete2 2 жыл бұрын

Dewayne I took your program to a local park from the late 1800’s and of course its been pounded were talking New England. I was done with the park based on the Nox. Showing deeper coins with good TID’s and depth were gone. But using your program look how much deeper clad the Nox missed and a dozen wheats the Dues found. The hard work got me the 1908 barber which my man is sweet as we know how hard out good silver is to come by!

@MetalDetectingNWGA 2 жыл бұрын

Hey thats awesome Steve! Always nice to see a Barber. This D2 continues to amaze me as well. XP did a great job with this detector. Hope you have continued success!

@jdeee3333 2 жыл бұрын

Amazing program went out for 1/2 an hour to a small sports field that I have pounded for years with the ATP, Deus 1, CTX3030 and amazingly found a 1950 Rosie and a 1961 Canadian dime (silver ). Keep those programs coming Fantastic 👍👍👍

@MetalDetectingNWGA 2 жыл бұрын

That’s great to hear! Glad it’s working well for you. I scored another 4 silvers with it today as well. Nothing too old.. just 3 Mercs and a Rosie but silver is silver! Thanks for posting your results!

@jbolf6 2 жыл бұрын

Got my Deus II last week Dewayne and I have been using the installed programs to get use to this machine. I did however load this program and can't wait to try it! I will let you know how I like it.

@MetalDetectingNWGA 2 жыл бұрын

Congrats on the new machine John! Hope ya do well with it!

@WiscoDetect 2 жыл бұрын

Just plugged in the settings going to try them out today. Thanks for the sliver slayer program.

@MetalDetectingNWGA 2 жыл бұрын

Good luck man. Hope ya find some silver!

@arthurlamica9477 Жыл бұрын

Tried your program out today it worked perfectly was very impressed 👏

@MetalDetectingNWGA Жыл бұрын

Good to hear!

@Kunk35 8 ай бұрын

I just recently got into detecting and found your program. I have used this program in 2 or 3 parks over the last week and I have to say it totally works! I found 2 silver rings, 2 silver dimes, and an 1875 Seated quarter dollar! Not all at the same park. What I have learned is, IF you are hunting coins or rings, you just have to trust the program and the tones you get. The only time this program has failed me is the occasional pull tab masquerading as a nickel, dime or quarter. (How many metals do they make those dang pulls out of anyway??) If you get a good repeatable tone with this program it's a good bet it's something worth keeping. And you don't spend your day digging foil and mystery objects. Great stuff!!

@MetalDetectingNWGA 8 ай бұрын

Thanks for the feedback and glad to hear it’s been working for ya!

@jijoe4257 2 жыл бұрын

Thanks for the SS program, I just installed it and can't wait to get out into my local park to try it out 😁

@MetalDetectingNWGA 2 жыл бұрын

Good luck JiJoe! Hope ya get some silver!

@phillipdavis1730 Жыл бұрын

Hey guys. Billy bad ass program. Have a lot I’ve been over about 12 times with regular programs. Today used yours and got a civil war button and a silver necklace pendant!!! Anyone who is doubting this guy knowledge on the deus two. DONT!!! He is jam up and jelly tight when it comes to the Xp deus 2?!! Freaking so happy with my civil war button

@MetalDetectingNWGA Жыл бұрын

Thanks for the kind words Phillip. Glad you like the program and congrats on the CW button! Very cool!

@mikelego9362 2 жыл бұрын

Wish I had a deus 2 , I’m saving up 💰 and maybe soon I will have one 🤞🏼but after hot summer is gone I can’t wait to go hunting and see that program work, nice video Thanks

@MetalDetectingNWGA 2 жыл бұрын

Hey Mike! I've been wondering where you disappeared to. Hope you've been doing well! With your luck, you'll find enough silver to pay for a Deus 2 in no time. :)

@phillip7506 Жыл бұрын

+1 sub for this program. looking forward to trying this out in the field tomorrow! TY MDNWGA!!

@MetalDetectingNWGA Жыл бұрын

Thanks Phillip. Good luck!

@phillip7506 Жыл бұрын

@@MetalDetectingNWGA found a 47-s quarter with this program in a pounded area. woop woop!

@MetalDetectingNWGA Жыл бұрын

@@phillip7506 outstanding! Congrats on the silver!

@Delprete2 2 жыл бұрын

Dewayne heading out tomorrow to the oldest known park in Boston built in the 1800’s. No doubt its been pounded extra hard. Based on my test garden stock program Deep HC hits my old buried coins the best. I’m simply going to notch out 87 and lower hoping for silver. Based on time restraints I have 3 hours until my flight leaves. Wish me luck and thank’s for all the great vids. Including myself I’m sure many people enjoy the work you’ve put into them!

@MetalDetectingNWGA 2 жыл бұрын

Sounds like a fun place to hunt Steve. The Deep HC is another one I enjoy using too. I appreciate the kind words & good luck tomorrow! Let me know how it goes!

@Delprete2 2 жыл бұрын

Did not work out. Could find partly I guess thats Boston LOL!

@Delprete2 2 жыл бұрын

Well you know my friend we love this hobby because we all have a nerd streak or what ever we want to call it. Of course there’s no exception for Field work. As we know this machine gives us so much room for tweaking . It’s so nice to have a guy like you who can really learn the ins and outs of our hobby ad help us progress in the states. Thinking out loud my first impressions of Deep HC is its like the Nox’s single high frequency conductor program that hits to many type aluminum targets and makes iron sound good. Keep providing feed back so many of us appreciate the time and effort you put into your channel. Anyone who runs a active a thriving channel knows how much work is involved! Good job!

@MetalDetectingNWGA 2 жыл бұрын

@@Delprete2 thanks man. I really appreciate the kind words. I also tried Deep HC set up like Silver Slayer, but like you, I had the same results with aluminum and iron. I find the Fast based programs just tend to work better for me where there's a lot of modern trash. Deep HC works great out in open fields.

@billlike5194 Ай бұрын

Not sure your still on You Tube, I have saved this program and added to my Deus after every update. It’s a great program and thanks for taking time to add to YT.

@MetalDetectingNWGA Ай бұрын

Thanks Bill! I’m still around. Glad the program is working well for you. GL & HH!

@James.Bizzell 2 жыл бұрын

This is a great coin program! This is almost exactly the program I have been using since I got my Deus II in February of this year. I use a program close to this on the Deus 1 as well. It cuts out a lot of trash and does get the coins at a good depth. I have to use a program like this because I am mainly a clad hunter and I hunt extremely trashy parks and the ground is like concrete. I do not advertise these settings because people like to put me down and say that 'you have to dig it all' and that may be true for some people in some situations, but not in mine. I have a video on my channel that shows how trashy my parks are and I dare anyone that hunts where I do to 'dig it all' as that just will not happen. Thanks for this video as I am sure it will help many others to have some fun and successful hunts.

@MetalDetectingNWGA 2 жыл бұрын

Hey James, I agree 100%! Sometimes (a lot of times) it’s just not possible to “dig it all”. To me, detecting is a game of odds. I want to increase the treasure to trash ratio so that I can spend more time recovering good targets and less time chasing junk. Don’t get me wrong, when I’m hunting older sites for relics I use much less discrimination and dig a lot more targets, but if I tried that at my local trashy parks I’d end up with a pouch full of trash and an aching back. I’m no spring chicken anymore, so I’m just not able to dig it all. Will I miss some good targets? Absolutely. But at the end of the day I’ll get more good targets for the time I spent detecting. Thanks for watching and commenting!

@SuperJupiter33 Жыл бұрын

Hi James ...would you share the coin program you use for the dues 1. thank you !

@James.Bizzell Жыл бұрын

@@SuperJupiter33 I do not have that program any more I have updated to v1.10 and I am working the bugs out of a coin program I made. If you want that I will share it. Remember, it needs a little more tweaking and time in the field b4 I consider it a good program but I did just get back in from a hunt and it works pretty good.

@davidfrazier1186 2 жыл бұрын

Thank You very much for the Deus 2 Tutorials

@MetalDetectingNWGA 2 жыл бұрын

No problem David. Thanks for watching!

@DiggingBuddy Жыл бұрын

I’m gonna try it out today, thanks!

@MetalDetectingNWGA Жыл бұрын

Good luck!

@qbbills00 Жыл бұрын

Thanks for the program. Going to give it a shot on a couple old colonial spots

@MetalDetectingNWGA Жыл бұрын

Good luck!

@qbbills00 Жыл бұрын

@@MetalDetectingNWGA went to a spot where I've pulled 225+ silver coins and have hammered the place. Your program sniffed out 2 more silvers today!

@MetalDetectingNWGA Жыл бұрын

@@qbbills00 Outstanding man! Thats what we like to hear! Sounds like a great spot you have there!

@DiggingCanuck Жыл бұрын

Great program. Thank you !!

@MetalDetectingNWGA Жыл бұрын

Thanks Liz! Glad ya like it.

@piedmontartifacts8910 2 жыл бұрын

I like it, and great finds. I’ll be put a SS program in tonight. Kenny

@MetalDetectingNWGA 2 жыл бұрын

Thanks Kenny! Hope it works well for ya!

@kimberlyjohnson6607 2 жыл бұрын

Interesting to meet you today, I too love history.

@MetalDetectingNWGA 2 жыл бұрын

You too Kimberly! Enjoyed our convo!

@kimberlyjohnson6607 2 жыл бұрын

@@MetalDetectingNWGA me too!

@motoceg 4 ай бұрын

This is a great program. I tried it on Thursday. I found 6 silver and a us marines ring! Thank you for sharing!

@MetalDetectingNWGA 4 ай бұрын

Glad its working for ya and congrats on the finds!

@PeterOkeefe54 4 ай бұрын

oh please!! motoceg is part of our group here in NY and some of us using your program are killing it..got a barber half thursday with it..@@MetalDetectingNWGA

@MetalDetectingNWGA Ай бұрын

@@PeterOkeefe54 Sorry, I just noticed this comment. Glad to hear its working well for you guys! Congrats on the Barber half!

@lancemcilwainoutcastmetald5398 Жыл бұрын

Im definitely going to try this. Thanks

@MetalDetectingNWGA Жыл бұрын

Good luck with it Lance!

@dadams1437 2 жыл бұрын

This program works well. I was just about to go back to the D1 for coinshooting due to the high VDI of trash on the D2, but I went back and tried this with the D2 and killed it over a couple of hours. A couple of unavoidable smashed caps, but a couple dozen coins, even a few pennies. I did block the nickle notch due to beavertails, etc, but when it sings its a 95% coin. Thanks.

@MetalDetectingNWGA 2 жыл бұрын

That's good to hear man! It sure is nice to skip all of the surface stuff and only dig deeper signals in the silver range. Hope it continues to work well for ya, and thanks for posting your results!

@normanadams5739 2 жыл бұрын

I found several Liberty Nickel with this in older parks. I think because all have been hammering out the silver and no one really is looking for the nickel tones in these pounded parks!

@MetalDetectingNWGA 2 жыл бұрын

Yep, and the cool thing is, if you keep digging those nickel signals you’ll eventually be surprised with some gold!

@daddyflea1 Жыл бұрын

Using a Modified version of your program to find most coins in US. I increased the Notch to include Zinc Pennies and Narrowed the Nickle Notch to cut out more Tabs. I had my Reactivity on 2 but am undecided if I should lower that or not. Finding a bunch of Coins on end but not much Silver so far. I had one place that I have hunted with V3i, VX3, and Etrac. This was a very small yard at an old House. I think I found at least 10 coins, no silver, but several old Wheats, that were missed with the other Detectors. I did find a 42 Mercury yesterday and I tested it using the XY screen and got nothing but a Dot. All I hunt is old houses so I am still undecided about the Reactive speed.

@MetalDetectingNWGA Жыл бұрын

Thanks for the report Danny. Sounds like you're finding plenty of coins. Silver will come as well. Just gotta get your coil over it. Unless I'm on a super contaminated site, I like to run a lower reactivity, usually set at 1, with a slight slower sweep speed. Gets me a little extra depth. Good luck and HH!

@denniswach7767 Жыл бұрын

You need to use the zoom function for the xy screen

@joncarlson5561 3 ай бұрын

Great program thank you

@MetalDetectingNWGA 3 ай бұрын

Thanks Jon.

@Delprete2 2 жыл бұрын

As always a great video. I have lot of time on the Nox and realize you do also. One of the things I ran across is deeper copper pennies could ring up as dimes or even quarters at times. Does the Dues also suffer from this issue, or are VDI”s accurate. I do all I can to avoid pennies and just want dimes and above.

@MetalDetectingNWGA 2 жыл бұрын

Thanks Steve. The Deus 2 does still up average on some deeper pennies, though not nearly as much as the original Deus. For whatever reason, it seems to up average more on the modern copper memorials than wheat cents. I’ve noticed that a lot of times when it’s a deep penny up averaging, I’ll still see the occasional 89-90 (copper penny range) ID flash on the screen, which is a tell that I most likely have a copper rather than a silver. The ID on a deep copper seems to bounce around a little more than a deep silver too. The D2 ID isn’t perfect, but it’s consistent and still really good IMHO. Its waaaay better than the original Deus. A little better than the Equinox too, in my opinion.

@Delprete2 2 жыл бұрын

Thanks for the response. Is the depth gauge accurate? Just like I hunted on the Nox I go purely for silver and do what I can to avoid pennies.

@MetalDetectingNWGA 2 жыл бұрын

@@Delprete2 yes, it’s pretty consistent on coin sized targets. I like the horseshoe meter better than the depth arrows on some detectors.

@markkus1134 2 жыл бұрын

I like the hunt videos good video

@MetalDetectingNWGA 2 жыл бұрын

Thanks Mark!

@jaystrongbow9435 Жыл бұрын

This is a great silver program, I would open a notch from 80-82 for Trimes. There are way more of them in the ground than people think.

@MetalDetectingNWGA Жыл бұрын

Thanks Jay! Sure wish I could get my coil over a Trime!

@jaystrongbow6111 Жыл бұрын

@@MetalDetectingNWGA You will find one. On a Deus product, they are 81 VDI on clean ground, but I dug one this year that was like 60 VDI in light nails. I've found ten in all on old home sites in Western Massachusetts, and a lot of times it's a mid-tone, so cherry picking high tones keeps them from getting found.

@MetalDetectingNWGA Жыл бұрын

I hope so! I usually dig everything from 78 up when I'm coin shooting older sites, so maybe 2023 is the year!

@Delprete2 2 жыл бұрын

What is it about the SS program give the target a more zippy tone when deep. Is it pitch?

@MetalDetectingNWGA 2 жыл бұрын

It’s mostly the pitch tones, but I feel like the higher weighted frequencies of the Fast program enhances it even more.

@Delprete2 2 жыл бұрын

Used the program today. Got 4 wheats And a silver ring at one of my cleaned out Equiinox spots. If I wanted to skip nickels how exactly would I do that? Being used to the Nox I find the notch setting confusing.

@MetalDetectingNWGA 2 жыл бұрын

Hey, nice going Steve! To eliminate nickels, just create a single notch from 7 to 87. If a better explanation is needed, just let me know.

@impact9801 2 жыл бұрын

correct me if im wrong but higher weighted frequencies like fast (40khz max) would hit better on low conductors such as gold. for silver youd want lower frequencies

@MetalDetectingNWGA 2 жыл бұрын

Yes, higher weighted frequencies will hit low conductors deeper and lower weighted frequencies will hit high conductors deeper. There are some other advantages though, that higher weighted frequencies offer. For example, hitting coins on edge and separation. I’ve been finding a lot of coins on edge in heavily hunted parks. The frequency set used by the fast program still hits silver coins very well. It’s pegging those silver coins in parks that others have missed over the years. But if all out depth is your main goal, then yes something like Deep HC would be a better choice.

@cwhunter7127 2 жыл бұрын

Thanks Dewayne, will definitely load this one up. I know you do CW relic hunting. Do you have a good program for that? I hate to see you leave the videos but we do need some programming help and why the setting are used. Not a lot of that info out there but there’s tons of digging. I think this will be great for everyone. Thanks again.

@MetalDetectingNWGA 2 жыл бұрын

Thanks Tony. I’ve actually been using a modified version of the Fast program for everything. I really like how well it works and how the pitch tones make targets jump out at ya. When I’m hunting relics, I just drop the disc level down much lower and adjust the reactivity to match the site Im hunting. It’s been working great for me. Hope you’ve been doing well!

@cwhunter7127 2 жыл бұрын

@@MetalDetectingNWGA Dewayne, been doing good hope you are. I just got my D2 I will definitely try that on relics. I think the deep HC frequency is a bit low for some relics. I have never used pitch on my other Deus but I see that Calabash Digger loves it even at the beach. I gave up on my Deus1 to soon and I won’t be on this one. Do you run all the other settings on fast for relics on default other than reactivity and disc. Thanks again!!! HH.

@MetalDetectingNWGA 2 жыл бұрын

I actually gave up on my first Deus 1 too. Got frustrated with it and sold it only to buy another one a year later. I learned how to use the 2nd one, learned it’s limitations and really liked it after that. XP seems to have fixed pretty much all of the D1’s weaknesses with the D2. It has an excellent ID, way more stable and doesn’t false on iron nearly as much. You can actually use it to hunt sites with modern trash, unlike the original Deus. I’m really enjoying mine. A lot of the settings on the Fast program and others are just personal preference. I like to hear the iron, so I keep iron volume around 4. I like for the deeper targets to sound a bit more faint, but not too faint so I keep audio response set at 5. I like to keep bottlecap high when hunting parks but I drop it down to 2 or so when hunting older sites. Silencer gets knocked down a notch or two when hunting in thick iron. Other things like reactivity and sensitivity are also adjusted according to the site I’m hunting. But my favorite base program has been Fast with pitch tones.

@sirbraemoor7382 2 жыл бұрын

What version of the D II software are you running with this program?

@MetalDetectingNWGA 2 жыл бұрын

0.71.

@dogismyco-pirate 2 жыл бұрын

Good stuff!!!! I would buy one but inflation has picked my pockets on this second story addition. Maybe when I am done I can will c??

@MetalDetectingNWGA 2 жыл бұрын

No doubt man. Everything is crazy high right now. You still killing it at your honey hole?

@dogismyco-pirate 2 жыл бұрын

@@MetalDetectingNWGA trying to get out there for 2 weeks but the job list is keeping me busy! I need to have the hose all sorted out by the 17th when I have help showing up! With the cost of things these days I need to have all the tedious tasks done that I don't want to pay to have done! My back and elbows are shot so raising the roof and hanging the rock is what I want the help doing! Rambling on lol not sure when I will get in there but I hope it will be soon!!!!!

@ohiofredl Жыл бұрын

Thanks

@MetalDetectingNWGA Жыл бұрын

You're welcome fred.

@windrider10153 Жыл бұрын

Hi , I plan on doing a seeded hunt ,US silver coins 1-3 inches down all tokens clad , would you use this program for the hunt ?

@MetalDetectingNWGA Жыл бұрын

This program should work fine for a seeded hunt. Just remember, if you want to dig coins in the zinc/IHP range you’ll need to lower that 2nd notch to about 82.

@windrider10153 Жыл бұрын

@@MetalDetectingNWGA Thanks , Rich

@MauserKar98k Жыл бұрын

Is there a way to use this program with the WS6 Master pack? I can set most of the settings, but I can't seem to access all of them.

@MetalDetectingNWGA Жыл бұрын

I’ve never tried putting in any custom programs using just the WS6, so I’m not sure what the limitations are, if any. I was under the impression that the puck could do pretty much everything the remote can, but like I said I’ve never tried it. I’d post that question over on one of the forums. I’m sure someone there knows.

@MauserKar98k Жыл бұрын

@@MetalDetectingNWGA Thanks, just got the Deus II and I'm excited to get started with it! I'll drop something over on the Friendly Forum probably.

@waynerobinson2656 Жыл бұрын

@@MauserKar98kthe SS program can be set up in the WS6 but you are limited to one notch. As NWGA says just leave out the nickel notch, works fine for me.

@topekapc Жыл бұрын

can this be set up for the WS6 Master the same ?

@MetalDetectingNWGA Жыл бұрын

Hey Jeff. I believe the only limitation with setting this up on the WS6 would be that you're limited to only one notch. In that case, you could just skip the nickel notch, and notch from 7-87.

@jeffreyhicks9215 2 жыл бұрын

Since you are looking for silver with this program why did you not set iron volume to zero?

@MetalDetectingNWGA 2 жыл бұрын

Hi Jeff, I like to hear when I'm hunting in patches of iron so that I know I'm in an area that was heavily used, or that I may need to adjust my reactivity or swing speed.

@trolltaker 11 ай бұрын

I wish people would explain WHY they use a particular discrimination setting. WHY did you bump it from 6.8 to 7? Thanks. This is quite similar to a program that I came up with, only my base was the Relic preset. I used it because I believe that it (and gold) are a bit deeper than the others, and with the severe notching that I applied, the single proximity tone that it uses works fine. I found a lot of silver using that method, but I will be trying yours as well. To write it down for those that don't want to sit through a video: Base Program : Fast Raise discrimination from 6.8 to 7 Raise Bottlecaps to 5 Clear the current notch and add two new ones: (1) 7-59 and (2) 65-87 (leaves a notch for nickels) Iron volume: 4 Reactivity: reduce to 1.5 for added depth Audio response: Raise to 5 Sensitivity, as high as your site allows. Everything else, leave as it was.

@MetalDetectingNWGA 11 ай бұрын

Hi trolltaker. I did mention the reason I raised it from 6.8 to 7. It’s just to make it a nice even number, since my first notch starts at 7. Fine tuning a disc setting doesn’t matter too much anyway with all the notch we’re using here. Good luck and HH!

@trolltaker 11 ай бұрын

@@MetalDetectingNWGA Oh, OK. Sorry, I guess I missed that. I've always wondered anyway why we have integer TIDs and decimal ground numbers.

@kevinmccrory2347 Жыл бұрын

Tried your program in a very old park. Wasn’t having much luck. Noticed my brother that was using a equinox with 15 inch coil was pulling old silver out at 10 inches plus. So I switched over to deep HC and notched out everything up to 87. In no time I started hitting deep HC targets. Pulled a merq., standing Liberty, 1865 2 cent and 3 wheats. All targets was 9-12 inches deep. I’m not saying your program isn’t a great silver program. I was just wondering do you have any special settings you would use in a deep HC program where it seems all the targets that others have missed seem to be super deep. Thanks

@MetalDetectingNWGA Жыл бұрын

Hey Kevin, the standard Silver Slayer setting are sort of a compromise between speed and depth. If you’re hunting a spot where coins are running super deep and the ground isn’t extremely contaminated, you can drop the reactivity down to 0 or 0.5 and hit coins down to 10” (check out my video: deep coins with Silver Slayer). If coins are running even deeper than that, I’d definitely use the Deep HC program. For extra depth in Deep HC, the same tricks apply. Lower reactivity and sensitivity as high as conditions allow. Good luck!

@kevinmccrory2347 Жыл бұрын

@@MetalDetectingNWGA what about any of the other settings in deep HC? Is there anything else you would change. I think the only reason we are hitting these old coins is because they are so deep. There was no modern silver from the 40’s to 60’s. Once deep HC stops producing I’m going to switch to your fast silver slayer program. Just trying to figure out the perfect setting in Deep HC. Got a lot of ground to cover. Thanks

@MetalDetectingNWGA Жыл бұрын

@@kevinmccrory2347 Generally for all out depth you’ll want to minimize the filters you run. A lower bottlecap rejection, lower silencer and as little discrimination as you can stand. Those may let you hear slightly deeper targets, but they effect separation and blended signals more than anything else. If you turn off all of the filters, you’d basically be giving up all of the benefits of a modern detector in exchange for a very slight increase in depth. The settings that will increase depth the most are reactivity and sensitivity. Set up the tones however you like. Run enough discrimination to eliminate only the troublesome targets. Run your reactivity at 0 or 0.5 and swing slow. Run the sensitivity as high as you can while keeping the detector stable. If you have trouble hearing the faint deep targets, bump up the audio response a little. That should get you the max depth out of any of its programs.

@kevinmccrory2347 Жыл бұрын

@@MetalDetectingNWGA what about notch? Would you open the program up or keep using notch to block out most the trash?

@MetalDetectingNWGA Жыл бұрын

@@kevinmccrory2347 Notch isn’t going to have a big impact on depth, but running less notch will allow you to hear those deeper coins that may be blended with iron content or hampered by mineralization. For example, a 7” silver dime may read 92 on the meter. But on deeper targets the ground signal starts to consume the good target, so that same dime may read 87. Same thing if that dime happens to be near a nail. It’ll give you a blended lower ID. If the spot has a lot of trash, you might want to try notching up to 83 or so. You’ll still dig some trash but should get most silver coins too.

@diggingwithrodco1011 2 жыл бұрын

Thanks buddy I’m like you my videos are far in between it’s more fun just detecting and not working

@MetalDetectingNWGA 2 жыл бұрын

No doubt man. I’ve really enjoyed getting out without worrying with catching footage. Thanks for stopping by!

@louisc5896 Жыл бұрын

Will that program still pick gold coins up?

@MetalDetectingNWGA Жыл бұрын

Not as is, but If you done put in the 2nd notch, it’ll still get most gold coins. Only notch 7-59.

@DetectionAtilla 5 ай бұрын

What I don't understand is that with this setting I can't see any bronze?

@MetalDetectingNWGA 5 ай бұрын

What is the VDI# for the bronze target? Keep in mind, the program is designed for coinshooting common US silver coins, which generally ready 88 or higher. If looking for bronze targets with an ID of 87 or lower, you'd either need to use a different program, or adjust the notch to suit your desired targets.

@DetectionAtilla 5 ай бұрын

@@MetalDetectingNWGA I live in Germany, I thought I'd try air testing with objects, so I was wondering why I wasn't seeing any bronze things

@MetalDetectingNWGA 5 ай бұрын

@@DetectionAtilla I understand. In that case, I'd wave the bronze target in front of the coil while lowering the notch until it starts to come through. Then lock in the settings and you're good to go.

@lukemiller2895 Жыл бұрын

Do you ground balance the machine when using this program?

@MetalDetectingNWGA Жыл бұрын

Hey Luke. Yes I always ground balance.

@lukemiller2895 Жыл бұрын

@@MetalDetectingNWGA thanks... Im getting ready to order my Deus 2. I have SOOOO many hours on my nox 800 and like it. I went back and forth between D2 and manticore but im going with the deus 2. I just think itll fit me better and im a firm believer "depth is good, but seperation is key"

@MetalDetectingNWGA Жыл бұрын

@@lukemiller2895 I had a Nox 800 and currently have a D2 and a Manticore. All great detectors but if I could only keep one, it would be the D2. It’s deep, fast, lightweight, good TID and has the most nuanced audio of them all IMHO.

@lukemiller2895 Жыл бұрын

@@MetalDetectingNWGA the tones are one of the biggest keys for me, I have always said the 800 needed a volume setting for depth. The D2 Has just that in its audio

@waydwnbama-way3089 2 жыл бұрын

I thought I was the only one that noticed Paystreak insane swing speed shzzzz

@MetalDetectingNWGA 2 жыл бұрын

That fella has the fastest swing speed I’ve ever seen! lol! If I swung that fast at my spots, I’d be missing a lot of good targets. To each his own.

@vonbassett142 4 ай бұрын

Can someone help me with using pinpoint to locate a target. With the deus2. Thanks

@MetalDetectingNWGA 4 ай бұрын

What trouble are you having with it?

@vonbassett142 3 ай бұрын

@@MetalDetectingNWGA I figured it out yhanks

@jeffdowns1038 2 жыл бұрын

So you were/are a Slayer fan?

@MetalDetectingNWGA 2 жыл бұрын

Yes sir! I'm a Metal fan in general. My forum username (Rattlehead) comes from Megadeth's Vic Rattlehead. They're one of my top favorites.

@1CarsonChris Жыл бұрын

Me and a buddy used it today and ended up with 5 silvers in a spot that's been pounded. His 11" coil did better than my 9".

@MetalDetectingNWGA Жыл бұрын

Hey Chris! Good to hear that Deus 2 is working well for ya! I’ve been really happy with mine. I like the 9” a lot for most of my locations but I was thinking about picking up the new 13” to get a little more coverage and depth on certain sites where coins run deep. See ya on the forum!

@user-hx3ev3ng5g Жыл бұрын

@@MetalDetectingNWGA I just ordered the Deus II with the 9in coil plus I bought the the 13x11 for ground converge. Best of both worlds.

@MetalDetectingNWGA Жыл бұрын

@@user-hx3ev3ng5g that’s a great combo!

@davidpoulin7189 2 жыл бұрын

Besides Indian Head Cents be aware you will also miss U.S. silver 3 cent pieces { trimes }. U.S. Silver half dimes , and Spainish half Reales using these settings . I'm not disputing the need for silver cherry picking settings just don't freak out when I come behind you and dig that 1822 Capped Bust Half Dime.

@MetalDetectingNWGA 2 жыл бұрын

Yes, anytime you use ANY discrimination you risk missing some good targets. However, we all know that sometimes its just not practical to "dig it all" at your local trashy park. It's a trade off: Time spent detecting vs good targets dug. This program is designed to let you quickly snatch up the common silver that reads in the copper penny range and up.

@moisespinete2152 Жыл бұрын

Hello from México i am new with the xp 2 i copy the silver slave to my machine do you think It would help in the plots we have to much colonial fields AND plots here in Querétaro thanks in Advanced

@MetalDetectingNWGA Жыл бұрын

Hey Moises. It was really designed with US silver coins in mind, but you can always lower the notch to accept the type of items you expect to find. If possible, maybe gather a bunch of targets to test, take notes of the ID, then set your notch accordingly. Good luck!

@moisespinete2152 Жыл бұрын

Thank you very much my friend i ll tell you the results of the silver slave God bless you

@jdeee3333 2 жыл бұрын

This program is exactly what is needed in places that are full of garbage B caps, chunks of rusty crap, canslaw. Places where your eyes roll back in your head and your ears go numb after an hour or so.

@MetalDetectingNWGA 2 жыл бұрын

Glad it’s working well for you. :)

@Delprete2 2 жыл бұрын

Sorry my friend I’m not the most tech savvy i i thought I could post those last finds.

@MetalDetectingNWGA 2 жыл бұрын

Yeah, KZfaq should allow us to attach images to comments. That would be a useful feature for sure.

@Billsadventures13 Жыл бұрын

This program kills it for coins. Great way to cherry pick an area first then go back and mess with trash

@libtardismtruth9315 Жыл бұрын

Thank's for sharing

@MetalDetectingNWGA Жыл бұрын

You’re very welcome. Good luck!

@libtardismtruth9315 Жыл бұрын

@@MetalDetectingNWGA I reverted to .71 to try your silver program, Hope you start doing more videos.

@MetalDetectingNWGA Жыл бұрын

@@libtardismtruth9315 Good luck with it.

@wizardsofwisconsin7400 Жыл бұрын

Have I really not commented yet on this?? How is that possible with my mouth being as big as it is??😃 OK…if you have a place that is full full FULL of trash and nails and you’re not getting any more coins….TRY. THIS. SETUP. In my first 3 hunts with this machine using ONLY this setup I have found no less than ELEVEN silver coins and NINETEEN wheat cents, these coming from absolutely HORRIFIC old fairground sites. I have NO money to make, don’t care if you buy a Deus2, don’t care if you don’t. I will tell ANYONE that this WORKS. Now….can you get deeper coins in considerably cleaner ground with Deep HC? I would imagine so, that’s what it’s made for. But that program will NOT find coins on edge like this one will! As long as you know what to use where, the D2 is going to be one HELL of a tool to clean out coins from places you didn’t even think coins existed in anymore. Thanks for posting DeWayne!

@MetalDetectingNWGA Жыл бұрын

Thanks Kevin! Man I’m thrilled to hear how well you’re meshing with the Deus 2, and blown away by how many more old coins you’ve found at those sites in your first couple of weeks! You caught on to the D2 faster than me by a long shot! Took me a few weeks to really start to jive with it, but once the lightbulb went off, I knew it was going to replace my CTX as my go-to machine. Looking forward to seeing how much more silver you can pull outta that spot and others!