ARB Air Comp Comparison | SINGLE vs TWIN Cylinder | Do you need an air tank

ARB Air Comp Comparison | SINGLE vs TWIN Cylinder | Do you need an air tank | Speed inflation test

Рет қаралды 58,677

Күн бұрын

ARB Single or Twin Air Compressor? Which one do you need for your setup? Do you need an air tank, should I mount the compressor, or buy a portable unit? In this video we cover all the differences, specifications and test these two units.
I cover all aspects from price, air flow, duty cycles, features and them put them to the speed test pumping up one of my 305/65 18 AT tyres. How quickly do these compressors pump up off-road 4WD tyres?
Air compressors really are one of those essential pieces of equipment that every 4WD’er, caravaner, tourer or remote traveller NEED to have in their kit. I highly recommend buying a reputable brand of compressor for your travels, to avoid unnecessary issues.
I hope you enjoyed today video and I hope this provided you with the information you need to make that informed decision about which compressor best suits your needs.
If you have any questions about these units, about my setup or anything 4WD or caravan, don’t hesitate to contact us through Facebook or Instagram and we will do what we can to assist.
Single Portable Compressor: ebay.us/aZFlig
Twin Portable Compressor: ebay.us/8GEAoc
Digital Tyre Inflator: ebay.us/uwywd7
Air Hose Kit: ebay.us/WxIi8j
Here is some of the camera and audio gear used to film and produce our videos:
GoPro Hero 8: ebay.us/RolXxy
GoPro Mic Adapter: ebay.us/tsomax
Rode Videomicro: ebay.us/ZIagAa
Rode Videomic Pro: ebay.us/T8jep7
Rode Videomic Pro Deadcat: ebay.us/WUeLy6
Rode Wireless Go: ebay.us/ptDtzi
Canon EOS 70D: ebay.us/7tb0pR
DJI Mavic 2 Pro: ebay.us/OWPBQK
Follow us on:
Facebook: / xploroz
Instagram: xploringoz...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting XploringOz.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting XploringOz.

Пікірлер: 81

@microsnook3 2 жыл бұрын

this is exactly what ive been trying to figure out about the air gun, thank you so much! very clear

@RobertsAdventure Жыл бұрын

Nice test, thanks for showing the rear onboard installation and super clean switch and fitting mounting as well!

@XploringOz Жыл бұрын

No problems mate, hopefully it was helpful for you 🙏

@shanefraser1054 3 жыл бұрын

Thats a boss set up you have. Practical and space saving

@XploringOz 3 жыл бұрын

Thanks mate. I think it's great, works well, practical and still going strong. Cheers, Nathan

@ThePhantom1Mav 2 жыл бұрын

Great comparo and very informative. Thanks.

@XploringOz 2 жыл бұрын

Awesome, glad you enjoyed it. Cheers, Nathan.

@blusymmonds630 Жыл бұрын

Great video, do you think you could do another video that goes through how to put together the same setup with the compressor and attachment points as well as the pressure readout displays

@muzzap6265 4 жыл бұрын

Top vid Nathan. I got an ARB twin set up in my 200 without the tank. Same place in the rear. Got the portable ARB twin also. Mounted wins hands down every time. Portable is heavy to move around and takes up too much room. Great compressors. You need reliability and piece of mind when out in the bush. 👍👍👍

@XploringOz 4 жыл бұрын

Cheers mate! I agree, I reckon they are great units! Always love a mounted compressor, soo much more convenient!

@Surge1045 3 жыл бұрын

Excellent video and comparison. Thanks.

@XploringOz 3 жыл бұрын

Thanks mate, appreciate the feedback and glad you enjoyed it. Cheers, Nathan.

@outnumberedbysheep 3 жыл бұрын

This is a very good review. Just facts. No filler. And articulated clearly. Really well done. A review of the dual compressor portable carry case was missing due to the gentleman’s impressive on board set up. But being ARB, I’m sure it’s adequate. Perhaps the first 300mm of the fill hose could be insulated with heat tape to preserve its integrity?

@XploringOz 3 жыл бұрын

Thanks for the feedback. I appreciate that. I'm glad you enjoyed this video. Adding some insulated heat tape could potentially increase the life of hoses when exposed to heat and it would interesting to hear from anyone that may have done this. Thanks for watching and I hope you enjoy the other content. Cheers, Nathan.

@samhartfieldlewis5247 2 жыл бұрын

Really handy explanation, the single one be fine for idea been thinking of thank you

@XploringOz 2 жыл бұрын

Thanks mate, I'm glad to hear that it was helpful. All the best with your unit, I'm sure it will be reliable whichever way you choose! Cheers, Nathan.

@superwag634 Жыл бұрын

I have my original ARB compressor which I use for tyres and front and rear air lockers. Had it for decades. It’s turning 30 next year. Good unit mounted under bonnet but getting slower and slower to pump up my 33s AT tyres from 16 to 40 after beach runs. Still works well for air lockers

@brianjensen5200 Жыл бұрын

Just refurb it, the kit is only $59 for all the parts including new cylinder liner and piston, it'll be good as the day you bought it

@jarrod1687 3 жыл бұрын

Mate love the way you have set up your air system

@XploringOz 3 жыл бұрын

Thanks mate. I had to wait a while for it, but it all worked out in the end and I'm glad it did. It has definitely become one of my favourite mods on the vehicle. Cheers, Nathan.

@donkeyrider 3 жыл бұрын

very good information.

@XploringOz 3 жыл бұрын

Cheers mate, appreciate the feedback.

@nicholascaine386 Жыл бұрын

Hey Nathan, great comparison video. I’ve been watching your videos and find the information really valuable. Sorry that I am commenting on a 3yr old video but I was hoping you might be able to shed some light on your switch wiring. I’m about to install a compressor and like how you have wired the pneumatic switches to activate the compressor to inflate then have the main switch to turn the compressor on and off. Could you provide me some more detail on how you have had this wired up? Cheers, Nic

@RibeyeconAdventures Жыл бұрын

Thank you for making the video. Based on the vid, CKMA12 is what I need--I have 33'' tires on 20'' wheels and do not go lower than 15-18 PSI, so the single should get me up to 30-35 PSI with no issues. But seems retailers are under impression that this one is for lockers and that I need the twin version. 🤷‍♂

@XploringOz Жыл бұрын

Hey mate, you're absolutely right. The single is just fine and I used one for years without any issues whatsoever. That's a good upsell though I guess, but if time/budget doesn't meet the twin, stick with the single 👍

@phlippinout 2 жыл бұрын

Excellent videy.

@XploringOz 2 жыл бұрын

Cheers mate.

@trialnterror Жыл бұрын

I have the arb single compressor with the small tank for my rear arb locker with the adapter to be able to fill up to 35” tires in my Jeep Tj rubicon. Still have the stock compressor for the front stock locker.

@XploringOz Жыл бұрын

Awesome, they are great unit! 👍

@holgermuller2987 4 жыл бұрын

Well done great installation in the 200 series with the bracket all tucked away. Not the cheapest but you get ride of the extra box and heavy external compressor. My installation goes in this week. Please allow me a commence before someone starts complain about the compressor hooked up to the Aux deep cycle battery in the front drawing to much power from the battery. Yep, the twin compressor will draw appr 70+ amps instead single 35 amps, require larger size cable which assumingely installed to your set up in the rear and while you pump multiple tires for longer period it would be advisable to press the battery link button to link the starter battery with the Aux battery for support if you have it installed. Cheers

@XploringOz 4 жыл бұрын

Thanks mate, I'm very happy with the way it turned out and the way it works. Your point about the batteries is noted. Again, thanks, Nathan.

@davidmizzi7216 3 жыл бұрын

Hi mate great video you made up my mine which way to go. Question about the paddle switches you used are they the manual type or the electric type. Well done mate.

@XploringOz 3 жыл бұрын

Cheers mate. So the paddle switches used here are the manual type. Cheers, Nathan.

@peterc1171 Жыл бұрын

Great video as always Nathan. Sorry if it’s already been asked but the twin rear air bag switched inflator deflator is a game changer. Wow just brilliant. Can I ask who sells this ? Again sorry if it’s already been asked. Love it !!

@peterc1171 Жыл бұрын

Just did some hunting. Direct Suspensions?

@XploringOz Жыл бұрын

All good mate, so I just bought my kit from an eBay store - ebay.us/6p3ROc I then just had a local fitter install this into my existing compressor setup 👍

@aladdinmilad6064 Жыл бұрын

Oscar for patience.. i would have burned the whole place because if them flies 😅😂.. great review,, thanks mate 🙏

@XploringOz Жыл бұрын

Haha, thanks mate 👍

@aviationenglishforpilots7807 3 жыл бұрын

Nice video,it helps a lot! I was wondering if the portable arb compressor could be run on a motorcycle battery. I would like to have one for my offroad rides, what do you think? Motorcycle batteries seem a lot smaller than truck batteries, do you think the compressor would deliver the same output? Thanks in advance and again great video!

@XploringOz 3 жыл бұрын

Glad the video was helpful. So I can’t accurately comment on the motorbike situation. I guess it would depend on the amperage being put back into the battery by the alternator, but my initial feeling is that it would work. I think that the small tyres on the motorbike and the short run time of the compressor shouldn’t place the battery under excessive stress.

@krump7429 4 жыл бұрын

Cool video. It seems the 4 litre tank is a waste of money considering the negligible advantages it gives. I do agree with you though, ive had my tool box arb compressor for nearly 8 years. And it hasnt skipped a beat. I feel the arb twin coupled with an indeflate device would be the best most efficient way to go about it as it can do two tyres at once. Can you purchase an indeflate and test it lol. Cool video i like ur informative style. Subscribed.

@XploringOz 4 жыл бұрын

Thanks mate 👍 appreciate the comments. Haha, maybe I’ll get an Indeflate down the track, if I do, I’ll be sure to chuck a video up 👍 I guess the tank really only helps with air tools and the initial burst of air when inflating. For me, it fits well in that rear space.

@olliehopnoodle4628 2 жыл бұрын

The advantage to an air tank for airing up is the compressor continues to operate as you move between tires. So if it takes you, say, 20 seconds to disconnect, put the cap on, get to the next tire, take that cap off and then connect the hose the tank will save you about a minute of air up time moving 3 times from tire to tire. Also, the initial tire fill will be much faster with the tank already at 150psi. And you can run air tools...

@TriNguyen-qq5ul 3 жыл бұрын

Hi bro really enjoyed watching your videos, is the price mansion included labour or just compressor

@XploringOz 2 жыл бұрын

Hey mate, glad you're enjoying the channel. So that price is just for the compressor. Labour to fit would be additional. Cheers, Nathan.

@mjcj1971 4 жыл бұрын

Great comparison test. Enjoy your videos. Something to keep in mind, you should never direct compressed air on your skin. You could get an air embolism.

@colsonjoziah5059 3 жыл бұрын

instablaster.

@scottburley8656 4 жыл бұрын

Great video mate, did you install the the compressor and tank your self? If so was it difficult to install?

@XploringOz 4 жыл бұрын

Cheers mate! I didn't install the compressor myself in this case. It was done by Ultimate 4WD Equipment, however I couldn't imagine it would be too difficult. If you're handy with auto electrics and can get a good seal on the air plumbing, you should be right. The brackets and compressors are all direct bolt in a believe.

@Evenstephenss 3 жыл бұрын

Nice set up. Who makes the switch panel on your drawers (driver side with compressor)?

@XploringOz 3 жыл бұрын

Thanks mate. So the switch panels were cut by Custom Installations - the company who made the drawers. I've done a full run down on the drawers systems themselves and there's a little more detail there - kzfaq.info/get/bejne/jc2XrLJ3s67In4k.html I designed how I wanted them lay out on the drawer system, Custom Installations created them and Ultimate 4WD Equipment fitted all the electrical components.

@kisbushcraftdownunder 4 жыл бұрын

I was looking at the twin compressor and mounting in the rear but as my wiring to the rear came direct from my deep cycle battery it was to great of a amp draw for the battery and I would have to connect to the start battery

@XploringOz 4 жыл бұрын

They do draw a bit of power. Are you worried about the long term effect on drawing a large load from a deep cycle?

@kisbushcraftdownunder 4 жыл бұрын

@@XploringOz I didn't do any shortcuts in the wiring I used 10mm twin sheath the bare cable just fits in the 50 amp Anderson plugs so no voltage drop It was ARB who said it was a bad idea to load a deep cycle up with that amp draw with the engine running my DC to Dc is putting out 25 amps into the deep cycle I can't see a problem to air up my 265 65 17inch tyres should only take ten minutes

@XploringOz 4 жыл бұрын

KIS Bush Craft Downunder Sounds like a good solution to me. Given that we generally only use this power draw for a short time, it would very unlikely the starter battery would ever run down with the engine running.

@paulvanross4783 3 жыл бұрын

Hi mate, I’m looking at the twin like you have it installed. I tow with my 200, don’t have drawers though... with that side panel, do you open it when using the pump, or is it fine to stay enclosed?

@XploringOz 3 жыл бұрын

Hi Paul, So these units produce little heat, however it’s perfectly safe to use with the compartment closed. There’s a fair bit of room in their and I haven’t had a problem so far. It’s a great location for mounting the compressor in the 200. Cheers, Nathan.

@nickroberts7070 4 жыл бұрын

Good video. How do you manage condensation in the tank all tucked up in there? I had the single mounted in the engine bay of a Prado and now 200, and it does take a while to get all corners back up. It is a robust little unit though. Agree, without a tank, air gun is useless.

@XploringOz 4 жыл бұрын

Thanks mate. I agree the single cylinder is a great little unit and I used it for years pumping up the 33" muddies on my GU patrol with no issue, but the speed and power behind the twin is awesome. In relation to the condensation, I have noticed there is no drain tap on the ARB tank, so regardless of whether it is mounted in this location or elsewhere, the plumbing would have to be removed to be drained. Further, I really haven't had much of an issue with condensation in the past, given the amount that it is used in my application. I think it would take years of general 4WD'ing and camping to create an issue with condensation and then it would have to be removed to drain. If you were using it in a commercial or industrial application, I would suspect a different tank, or easier way to drain the fluid would have to be installed. Thanks, Nathan.

@zacandmillie 4 жыл бұрын

@@XploringOz Just on that point of condensation, I used to drive Unimogs in the army and one of our daily First Parade tasks was to drain the condensation from the air tanks. Admittedly they were for the air brakes but it is surprising how much moisture accumulates daily. Perhaps this is something after-market suppliers need to consider: a bleed valve.

@ausguy4385 2 жыл бұрын

The air on board tank has drain and is without the arb tax

@petercdc5654 Жыл бұрын

Can you use the Clearview Tyre Spider with the twin air compressor

@XploringOz Жыл бұрын

With the right adaptors I don't see why not. I haven't tried this personally.

@1985erikt 3 жыл бұрын

Can a tank be attached to the single? I don't need it for big tires, just in case for regular tires, but would like the air hose

@XploringOz 3 жыл бұрын

Hey mate, the tank, or any tank can be fitted to the single compressor as well. Just have to organise the correct fittings 👍

@ajcamperspantry5069 3 жыл бұрын

Hey Nathan. What psi do you run in your airbags for turning and not towing? Cheers AJ

@XploringOz 3 жыл бұрын

Hey mate, because we have the heavy duty 400kg springs in the rear, when we’re not towing we often sit around the 6-8PSI mark in the bags. If we are loaded up for a trip, still not towing, we will just use enough to level out and feel comfortable 👍

@daryllee9033 2 жыл бұрын

G'day mate, had you tried the single comp with a tank ?

@XploringOz 2 жыл бұрын

Hey mate, negative. Have never tried the single compressor with the tank. It would provide some benefit, however it will just take longer to pressurise and refill the tank between use.

@PhilTaylorPhotog 4 жыл бұрын

Is it possible or of benefit to add the tank to the single compressor?

@XploringOz 4 жыл бұрын

It's definitely possible. It would just take a a little longer to fill the tank on the single cylinder, but you would still get some advantages, like a higher output of air on initial use and pressure build up between inflating each tyre. Cheers, Nathan.

@PhilTaylorPhotog 4 жыл бұрын

@@XploringOz Thanks for the great comparison. I already have the single cylinder version but I love the mounting position and space saving aspects. I'll put it on the list of jobs.

@pannonianpraetorians6431 4 жыл бұрын

💪💪👏

@brianjensen5200 Жыл бұрын

I think you'll find that it's not actually 150 psi, it's 105, just under 7.5bars

@XploringOz Жыл бұрын

Hey mate, I'm only going off the PSI ratings from ARB themselves on the dual compressor - www.arb.com.au/assets/air-lockers/6-07.pdf

@brianjensen5200 Жыл бұрын

@@XploringOz ok. If you get a chance, have a look at the pressure switch on the unit itself. I would like to know if they've changed it since I got mine. I'm just about to pick up a new two cylinder unit for my next car. If you can't be bothered or it's inaccessible, then I'll report back when I get mine in hand, should be later this week hopefully.

@brianjensen5200 Жыл бұрын

@@XploringOz I got my compressor, and checked the switch. It's stamped ON 135 PSI, OFF 150 PSI. So current twin runs a much higher pressure than the old single.

@XploringOz Жыл бұрын

@@brianjensen5200 Awesome, good news 👍

@officialWWM 2 жыл бұрын

They are both way overpriced nowadays. There are now better and much cheaper options on the market.

@mjcj1971 4 жыл бұрын

Great comparison test. Enjoy your videos. Something to keep in mind, you should never direct compressed air on your skin. You could get an air embolism.

@XploringOz 4 жыл бұрын

Thanks mate. Glad you enjoy them. Yeah, not something I make a habit of, just a quick one for illustration purposes. Didn't have much else out there to demonstrate the test with. Thanks again!