Although some parts of the wiring are unclear, this is by far the BEST video on installation of fog lights.
@naiduvinay49112 жыл бұрын
"If you loose the speedometer, you can't see your speed" 👍
@motovin772 жыл бұрын
Little humour 😂
@automotriztechnica2 жыл бұрын
Yes, he stated that 😀
@omkarbordavekar40982 жыл бұрын
Thank you. Today I have installed maddog scout x by my own. Only due to your video. Thanks for giving confidence. So happy after seeing results. N learnt many more things.
@motovin772 жыл бұрын
That's awesome, fantastic job 🤩
@VibhorWase2 жыл бұрын
It looks even more badass now
@automotriztechnica2 жыл бұрын
It looks more beautiful than before 😀👍
@brijeshparmar74602 жыл бұрын
Bro.. R u the engineer who has designed the hero xpluse.. I am wondering how u know abt the entire installation
@motovin772 жыл бұрын
Hahahahaha no brother i didn't design the Xpulse 😀 it's just a simple electric circuit, once you study it, it's quite simple.
@brijeshparmar74602 жыл бұрын
@@motovin77 I like you videos about the xpluse 200 as I am planning to buy it. I am impressed with you cause you do lot of things at your own. So i request you to keep inspiring upcoming owners like me and provide the insight about Xpluse. With regard to study of installation, if there is any guide or video do let me know.
@motovin772 жыл бұрын
@@brijeshparmar7460 Thanks 🙏😊
@avinashgowda89322 жыл бұрын
I am into xpulse family now, yesterday I bought xpulse 200 4v, even I nees to install aux light. Looks simple but u have an great idea of it
@motovin772 жыл бұрын
@@avinashgowda8932 Congratulations 👍
@jsyn_pАй бұрын
Very good video. Probably one of the most comprehensive videos on YT. I have a query though. Do we need to ground the black wire of the harness or does it go directly into the negative terminal of the battery.
@ujjwal94roy2 жыл бұрын
Thanks for making it simple.....
@nitinhadale15192 жыл бұрын
Is this the most versatile and value for money bike ? City Highway Off road
@motovin772 жыл бұрын
Absolutely it is and there is no competition at this price point... Lowest cost of purchase and maintenance...
@masacheku2 жыл бұрын
Very useful! Subscribed :)
@motovin772 жыл бұрын
🙏
@bilbobaggins37472 жыл бұрын
Wow man great
@MSN_MOTO2 жыл бұрын
Excellent job
@rahul_rathva_ Жыл бұрын
Sir Love from gujarat!....kya garaj se Bina wires cut Kiye fog light lagvane se warranty rahti hai ya nahi ?
@motovin77 Жыл бұрын
Thanks Bhai 👍 yes if no original wire is cut, warranty is intact.
@abhinavkashyap20002 жыл бұрын
Hi, I liked this video as you were quite thorough with installation steps. I own a hero Xpulse BS6 but am hesitant in installing aux lights. As per Hero service center that might void the bike's warrenty. Did you confirm this with Hero ?
@motovin772 жыл бұрын
Thanks 😊🙏 warranty will not be void as none of the original wiring was cut or tampered.
@abhinavkashyap20002 жыл бұрын
@@motovin77 Thanks a lot for sharing :)
@MountainsMoto2 жыл бұрын
Thanks, i also bought the Scout lights for my Xpulse. Can you tell me while pulling out all tank tubes, will it also spill the fuel ?
@motovin772 жыл бұрын
Not really, but a few drops might which isn't an issue.
@ashutoshranjan1312 жыл бұрын
i have booked the same colour xpulse , can you tell me whats the price of Aux Light with installation charges ? , also will it affect warranty ?
@motovin772 жыл бұрын
Congratulations 👍 Lights costed me about 8000 and installation is self.. should not affect warranty as it's a seperate wiring harness
@ArnabMurshidabadi2 ай бұрын
Hello sir... One question I have. To install the clamps, you need to work with the screws that are holding the forks. Is it okay to do so?
@motovin772 ай бұрын
Yes sir that is correct and it's completely safe, just ensure to tighten the bolts back as they were before
@ArnabMurshidabadi2 ай бұрын
@@motovin77 Thank you sir. 👍🏽 Actually I have ScoutX installed on the engine guard, but that location absorbs some amount of illumination. So I thought about installing it on the handlebar but was considering not to hamper any factory fittings. I decided the place to be just below the indicators using the Maddog Fork Clamp (Rs-1699), but I doubt it'll touch the tank when the handlebar is turned to the maximum. So I think I'll have to do what you've done.
@rameshkumar89652 жыл бұрын
Thanks, Very nicely narrated, can i use wire from horn to trigger relay? Anyways horn works only after ignition is on. Or Can I tap a wire from low beam light and use that to trigger relay, so Auxiliary lights work only when engine starts?
@rajatghosh2 жыл бұрын
show room claim says xpulse battery too weak to handle extra lights, do u have any idea on this ? or feedback ?
@motovin772 жыл бұрын
No idea sir, i use the lights mostly on highway for night rides only.
@ujjwal94roy2 жыл бұрын
Can we use similar thing to connect bobo mobile holder/charger with ignition ? Since you connected your directly to battery.
@motovin772 жыл бұрын
Yes
@kkhaanabadoshh28 күн бұрын
Is it legal to put 40W Aux lights in this bike? I remember you went for Scout Aux for Highness as its illegal to intall Aux lights with higher wattage than the stock headlight.
@Saikat_Palit Жыл бұрын
You installed Scout, and non pro switch and harness in your cb350. Any reason why you switched to pro switch and harness? Are the non pro ones not suitable during rain? Also for fast night riding (80+) is Scout enough in cb350?
@thomaskamei42682 жыл бұрын
👍👍👍
@vinaypanchal1692 Жыл бұрын
Hey, Vinay is ther any leakage of fuel while removing the fuel tank?. I want to install the same with my xpulse can you plz help.
@motovin77 Жыл бұрын
Yes few drops of fuel will leak when you disconnect the fuel line to take off the tank. That should not be an issue.
@vinaypanchal1692 Жыл бұрын
@@motovin77 that's pretty much ok. My concern is there any continuous flow of petrol from the tank. If the tank was full. Btw thanks for your reply and support.
@OFFRoader-z9g24 күн бұрын
Sir what if the fuel is there inside tank? How to remove
@BD-vg5gg2 жыл бұрын
Sir i have one dout here.. regarding the actual switch for the scouts.. do we have a connector in the harness itself for the switch to plug in??
@motovin772 жыл бұрын
Yes, it's plug and play
@TusharWalwaikar2 жыл бұрын
Can we connect the bobo charger without wire cutting to the ignition ???
@motovin772 жыл бұрын
Yes, connect to the same wire where i connected the trigger wire of ScoutX wiring.
@rahulgajinkar60842 жыл бұрын
Any rusting issues in this bike
@motovin772 жыл бұрын
Got it 2 weeks ago, nothing so far...
@lofiwaves21232 жыл бұрын
Will you change your xpulse's exhaust or not I also want to change it? But doesn't want to drop it's mileage
@motovin772 жыл бұрын
Not really at this point.
@harishk97202 жыл бұрын
Person with white tshirt is your brother? I like your Tshirts bro where did you buy them?
@rahulgajinkar60842 жыл бұрын
What about material quality in this bike
@motovin772 жыл бұрын
Much more improvement quality, refinement, fit and finish....