xTool P2 55w CO2 laser - Introduction and project results

No video

xTool P2 55w CO2 laser - Introduction and project results

Рет қаралды 38,142

11 ай бұрын

Affiliate link to the xTool P2 55w CO2 laser. Purchasing through this link provides me with a small commission on the sale. Using this link is not required but is appreciated.
www.xtool.com/...
💰 Coupons to save you money 💰
💲 - Router bits - use code JAYBATES for 10% off - bitsbits.com/
----------
Mailing Address:
PO Box 33
Mathiston, MS 39752
Social links:
Lbry - lbry.tv/@jayba...
Odysee - odysee.com/@ja...
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86

Пікірлер: 76

@nighma 11 ай бұрын

It starts with a bench then some others and eventually you loose your workshop :P No, I'm kidding. I feel you man. It's so great to be able to share hobbies with our second half. Love it!

@jimpollockmusic 9 күн бұрын

Good video and information on the P2. BIG Fist bump for supporting your wife in this endeavor! Sounds like you are learning a few new skills as well. All the best!

@JayBates 11 ай бұрын

@pbates33 11 ай бұрын

Glad to hear Shawn is doing well. Sorry to hear he got out of the maker biz. I met you both in Skiatook, OK. Great video, Jay! Keep 'em coming!

@joshuakazfields4374 6 ай бұрын

Haven’t watched a video of yours since back in the garage. Nice to see your still doing content.

@WayneT51 9 ай бұрын

G'day mate, I think it's fantastic what Jamie and Tyler are doing. Your a good bloke for your support.

@thesplinteredfinger 11 ай бұрын

Jay, on the ring for the chisel I believe you have to have a fiber laser. The engraving on the cups, the laser is removing the painted surface and not actually scoring the metal. We are not as far into the business aspect as your wife, but I’m sure my wife will take off running as soon as we have all our systems in place. I second you on that emergency stop, hope the company improves on their next version of this machine or better yet, make it so that all new machine orders have an improved E-stop feature. You explained everything very well!

@JayBates 11 ай бұрын

The ring is aluminum and the engraving is just removing the coating. Co2 can do that.

@peterbrownwastaken 11 ай бұрын

Fun to see you get excited about all the projects!

@customcraftsbybruceslaton4872 10 ай бұрын

As soon as I get done biulding my house, I'm getting a P2. Thanks for the video, a lot of good info

@mlubecke 11 ай бұрын

I am so sorry to hear that your puppy passed.. my deepest condolences. 🙏🙏❤️❤️

@Casserole075 5 ай бұрын

Thanks Jay, very good information. I've been looking at buying the xTool p2 and this has helped greatly!

@protozee 11 ай бұрын

You did a very good review on this P2--thanks -remember run the laser at 80% or less to prolong the laser tube life , I use the start button to stop the machine to take a reading on the distance from laser tube tip to work surface, I bought the BOFA Advantage AD-350 filter,

@paulpardee 11 ай бұрын

that seems to be a common theme - xTool sends the laser to KZfaqr and KZfaqr's wife claims it!

@christipurr8237 11 ай бұрын

Safety First - Love your honest opinion!

@gbjones54 11 ай бұрын

Fun to see the excitement your wife has. My daughter is the same. Miss Shawn - tell him hi for me Jay.

@ga5743 11 ай бұрын

Something tells me there will be Mr & Mrs lasers soon . Nice explanation Jay.

@ifiwooddesigns 10 ай бұрын

I agree with easy access to E-Stops. I don’t think it’s too bad on the side especially if the operator is sitting there most of the time by laptop. But you are correct, a second one on top or front in case of an issue with a feed through issue. Really liking that P2 and want to get one, but still a bit more than what I’d spend.

@RoseKindred 4 ай бұрын

Well said and a great video. I agree with the safety aspects and that recessed button... I am leary of. The muscle memory to activate that would not help me. Lots of other great features and information though.

@jayhitek 11 ай бұрын

Upside down firetruck mistake made me laugh out loud.

@sinsofvorador 11 ай бұрын

I want to get a p2. But we're getting a cnc 1st. I think my wife will love that thing.

@drewpickard554 4 ай бұрын

My laser is on the way now, but ive had a CNC for 4ish years now. I LOVE my CNC. But the more I look into the laser stuff, I more I realized alot of the things Ive done on my CNC I could of done on a laser. And they might have come out better. Like Ive built alot of shop type things like a cordless tool holders with shelves with a hex pattern on the outside out of plywood. Im thinking im going to try building another on of the exact same thing and see if it takes me less machine time. But I do think using both the CNC and Lasers is the answer to really being able to make some really cool things. Well or just the router and laser

@AngieWilliamsDesigns 3 ай бұрын

I have a Glowforge. I also have used larger Epilog lasers at the makerspace I worked at. I really like my Glowforge. This looks pretty cool. I haven’t seen one that can do the curved surface engraving. And some of the other things look pretty cool.. If I was to get a second smaller one I’d probably look into one of these.

@AngieWilliamsDesigns 3 ай бұрын

I’m also really glad that you made the comment about not leaving it unattended. Soooo many people think that’s not an important thing. When I worked at the makerspace I had two fires happen. Luckily they were contained. But they only happened because the user was distracted and not paying any attention to what they were doing. Both experienced users. You gotta be safe. I will add though… the safety button… seems to kinda be unnecessary. Maybe not on that machine. But on every machine I’ve used the button that starts it will also pause it. Which stops the laser from producing power. So it essentially shuts the source down. Only thing I’m curious about is that lock you mentioned that locks the lid. If that allows you to open it… that would be great. I also would like to have that time counter on my laser. That’s handy.

@twinenk15 7 ай бұрын

I was watching your "Laser Business First Two Months=xTool P2. " By the time you got to going over the cost, I jumped to your channel look for the answer to my question, Why xTool? You answered that one right off at the beginning of this video. Unfortunately that appear to be the most popular answer amongst youtubers. What's holding me back from pulling the trigger is the cost. I would need the bundle to take advantage of the pass through and the rotary. So, to enter this game for my first laser, I will need to bust open the piggy bank + plus save up a little more. If someone can do this for fun with a laid back approach and make profit. My thought is what can I accomplish if I just turn it up a notch. Can I be in that friend and family group?

@LtNomad304 11 ай бұрын

My Xtool did 12 jobs before it died. It’s been four months and the company has yet to return an email or call. Hopefully it works out better for you.

@aquiles338 10 ай бұрын

😢 which model it was? Is it fixed now? Good luck

@LtNomad304 10 ай бұрын

@@aquiles338 10w m1. Still dead and have not heard from the company

@That_big_guy 9 ай бұрын

I'd like to know which model and what exactly you mean by "died". I have the xtool d1 "original not the pro" for over a year now. Upgraded everything, extensions rotary 20w head air assist everything you can get for it. So far I have had zero issues and I'm abusing the machine. If you mean these newer machines are not built as well it would help to know for my next upgrade route research.

@spkendrick 8 ай бұрын

@@LtNomad304 wow i hope you get it fixed or at least get the issue addressed. I hate to hear customer service issues.

@jimblack6733 5 ай бұрын

Good to know. I was looking seriously at the P2. I recently bought an AtomStack and their support is about the same as you speak of XTool. Maybe I’ll reconsider…. Thank you!

@gadgetmerc 11 ай бұрын

The lid is an E-stop in the same way as the brake on the bandsaw is an e-stop.

@drewpickard554 4 ай бұрын

I agree with you about the Emergency stops. You can call me dumb but ive gotten into the habit of I get ready to use a tool, in the position Im working then just touch the E stop. Just to be aware of where it is, had some times Ive needed it and been flustered then hunting. I do have cheaper tools than you, your bandsaw E stops are awesome. Now with my CNC and I will do the same on my laser, I use surge protectors, but I leave them not hidden and in the case of my CNC I put it in what I call my safe zone. Like the side of the machine where the rail runs. Just if something goes flying thats less exposed than the front. So if something bad happens and it has, my body is covered while I hit the kill all the power.

@AlexGreen1991 10 ай бұрын

Great machine, but you're 100 % right when it comes to emergency shut off button. I think it's okay that it's on the side, but it should be on the front of the side not in the back.

@mikedonaldson8898 10 ай бұрын

I have a D1 Pro 20W laser with the air purifier you mentioned. I have found the purifier is great for inside, however, It fills up with particles very quickly and the replacement filters are not cheap. I have tried blowing out the pre-filter, which does help, but the bigger part of the filter must be replaced and can not be blown out. I'm working on getting set up to just discharge through a hose to the outside to save on all the filter costs. This will require an in-line fan as the fan on the cover for my D1 Pro is not very strong.

@janhbrenna4264 9 ай бұрын

Hi, what was S. Stone youtube channel called again, remember there was also app back then, that was like youtube shorts / tiktok that all my favorite youtube woodworkes used but cant recall name of the app either ;) i belive you Jay have been one of the most consistend (sorry bad english) too put up new content. So hats of for you :)

@baltimoreace 11 ай бұрын

Hey Jay would you ever consider putting together a CNC class/course?

@andrewpinson1268 11 ай бұрын

Interesting all the way through. I have not looked at the price of this tool, but I assume it will be outside of my price range, but man would I love to have one. I have been looking for a good "retirement" system to make extra money. Now all I need is a generous sugar momma, a fair lottery win or the right bank heist and I am good to go. Can't wait until the next video.

@ShadowzGSD 11 ай бұрын

my eyes are drawn to the orange workbench behind you, have we seen it before? would love a closer look because i want one. 😁

@ShadowzGSD 11 ай бұрын

25:35 yay, close up 🤣

@RobSandstromDesigns 11 ай бұрын

Good overview of the machine but also interesting to hear how your wife has taken such an interest in using it. Your point about the emergency stop is a good point the manufacturer should consider. It is critical to have a fire extinguisher close by - which I see one right behind the machine. Doesn't mater that someone watches the fire start - they need to stop it if it starts to spread. Were you implying that the laser can engrave metal like your bands around the tool. I haven't heard of a CO2 laser being able to do this - can this machine engrave metal that is not powder coated or coated with some material. Great video. BTW I need lessons from your wife about how to sell things. I can't figure out how to get people wanting to buy things looking forward to your third video.

@Cadithial 9 ай бұрын

Think of the fire extinguisher as insurance on the tool. It "should" put out the fire before it damages your electronics / wiring. $160 insurance for a $5k tool.

@vickiwilcox133 5 ай бұрын

Great review. Although I believe you are being a bit harsh about the Emergency Stop, although it’s not ideally located. I too am a woodworker with a shop full of equipment and own the P2 and a CNC. The blades and bits on standard woodworking equipment are exponentially more hazardous than the P2 laser. The laser function doesn’t work without the lid closed (unless the switch has been overridden (not recommended). A small fire inside, although an emergency, is not going to remove a finger or a limb as wood cutting equipment would do. And, pressing the P2 E-stop isn’t going to put out the fire either. It’s simply going to stop the laser from running. Overall that was a very thorough review! Looks like your wife is taking it over and she’s killin’ it in sales. I like that they have made an auto fire extinguisher. 🧯 Oh, and very sorry about your dog. They’re family too.

@Blaze_1961 11 ай бұрын

Did you do something with voice recording? Something about it just sounds off and for me at least is very distracting. It almost sounds like you're in a room with bad acoustics.

@JayBates 11 ай бұрын

Same preset I've been using for a couple of years. Thanks for the feedback.

@MakingwithMarilyn 10 ай бұрын

@@JayBatesI actually think your sound is excellent on the video!

@bernardthongvanh5613 10 ай бұрын

do you need to wear safety glasses while it's working? (it's enclosed but maybe there is light leaking)

@amwtm 11 ай бұрын

Jay, if you'd be willing, I'd like to see this cut box joints on 1/4" ply. (the underlayment kind, not the fancy Russian kind) Instagram maybe?

@stlwoodworking 11 ай бұрын

Is it me or is that the first time you have been on video without the hat? lol

@JohnC1 11 ай бұрын

i too was wondering who that guy was... Sorry Jay.

@toasterboy85 11 ай бұрын

What software are you using? The proprietary xTool or lightburn? Does it seem new user friendly? Excellent video, looking forward the the next 2.

@JayBates 11 ай бұрын

The free software from xtool. Sticking with it until I kmy needs make me venture elsewhere.

@JayBates 11 ай бұрын

Yes. Very new user friendly.

@smu1129 11 ай бұрын

Even the machine straight from OSHA hell, commonly known as the K40 Laser Engraver, has the energency stop right on top of the carcass. WTF.

@johnford7847 11 ай бұрын

Interesting video - but you gave away many ideas for your wife's products! Good for xTool sales, but you potentially created competition for your wife. I have to admit that, while I have no interest in selling my handiwork, it's very interesting hearing you talk about the various factors involved in producing a successful product. Sorry about your dog.

@dpwmc93 9 ай бұрын

I just discovered your channel. Are you located in Michigan?

@BenButler1 11 ай бұрын

E stop position was sacrificed for packaging.

@Shiyacrafts 10 ай бұрын

Hi what is the sound level on this machine?

@ericeinsmann5559 11 ай бұрын

I'm sure this is a very nice machine, but $4500 is alot of money.. And I wonder how much a replacement co2 tube is going to cost.. Cause eventually you'll need one.. 55w is an odd power rating. Maybe they use a 60w tube and limit it to 55w?

@JayBates 11 ай бұрын

No clue. Estimated lifespan is 6000-8000 hours. Divide the replacement cost of the machine by lifespan hour's and its not a bad investment with the money being generated. Let's see about longevity. I hope it's good.

@ericeinsmann5559 11 ай бұрын

@@JayBates info I've seen on other co2 lasers says it depends on how hard you push it. They suggest not running it over 70% power. Maybe xtool is different somehow.. I was just suggesting that if the machine is that expensive, replacement parts will be too. But maybe a regular co2 tube will work..

@terrywilliams8864 9 ай бұрын

Can you cut jigsaws ?

@teaguewhite26 11 ай бұрын

Notes on box behind you about 25 foot away

@JayBates 11 ай бұрын

Probably

@teaguewhite26 11 ай бұрын

@JayBates I know it's probably a double sticker, but as you're stating you lost your notes, behind you on the left side of the screen is a box that appears to have a paper laying on it. I know you couldn't hear me all the way back here in the cheap seats, but I was yelling it nonetheless.

@ltsky311 6 ай бұрын

So in short you got the tool for free.

@simonhopkins3867 11 ай бұрын

Darling can I have my shop back please. 😉

@ramblin70 11 ай бұрын

Please notice that the video content shall be honest.

@RAcreativewoodworks 11 ай бұрын

Does anyone do woodworking anymore lol cnc/laser/3d printing what the world coming too lol

@NGinuity 11 ай бұрын

I know you were mostly joking, but every joke is often based on real belief of the comedian. I use CNC as a hybid woodworker. For instance, this week, I took a discarded silver maple branch, cut a turning blank on the bandsaw, turned a beer tap handle out of that, filled the carpenter ant tracks that were left with epoxy. Cleaned that back up..slabbed out a 4 inch branch of that same tree on the same bandsaw, laser cut a logo on one slab for that tap handle on the xtool, jigged up that turned beer tap handle on a Shapeoko CNC wood router, silhouetted the spot for that laser cut logo. Attached.. finished it with a monocoat. Now, should I make a tongue in cheek inverse comment about not consider someone a woodworker because they can't work at my level by incorporating hand/power/computer together? Do I not consider cabinet makers woodworkers because that's more about production, right angles and jigging than it is about art? We have to get out of the mindset that "Just because x woodworker uses y tool, they're not a real woodworker". Use the tools you have to enhance your creativity. This is one of them. Laser cutting and engraving as well as CNC routing is a HUGE level up for bespoke woodworking marketing items.

@JayBates 11 ай бұрын

When you got your drivers license did you have the thought "Does anyone walk anymore?" or did you use your drivers license as a tool to accomplish something faster? ;) Have a great day.

@jppalm3944 10 ай бұрын

Xtool support sucks. Lucky if you have no problems

@johnmigl3601 9 ай бұрын

Not free? 3 videos for a $4500 machine. Some will do anything to get free tools and convince themselves it is not free. Unscribe. Had enough. Listen to his experience. None