xTool P2 | Step-By-Step guide to Tumbler Engraving

xTool P2 | Step-By-Step guide to Tumbler Engraving | Ra2 Pro

Рет қаралды 38,671

Жыл бұрын

This is a step by step instruction video for engraving a powder coated tumbler with the xTool P2 Machine.
The results are amazing, crisp clear engraving that really shines.
Take a look and let me know in the comments of you have any questions.
If you are interested in any of the xTool products, I would really appreciate it if you used the affiliate links below.
Using an affiliate link will help support this channel.
Thanks a lot for watching!
Tumbler used in this video: a.co/d/4cZQkNn
This is an amazing machine with tons of new features that make it a leader in this class of laser engravers.
55W Co2 Laser
Built in Air Assist
Top Cover auto Lock
Two 16MP interior cameras
26x14 Bed
Riser increases height to 8.4 inches
Pass Through engraving
3D scanning of curved surfaces
Movable Z axis for engraving curved surfaces
Up to 20mm cutting of clear acrylic
Link for the new xTool P2 55W Co2 Laser:
www.xtool.com/products/xtool-...
Affiliate link for all xTool products:
www.xtool.com/?ref=4a1SxtiKce...
Download xTool Creative Space Software:
www.xtool.com/pages/software?...
Download Trial version of LightBurn:
lightburnsoftware.com/pages/t...
If you enjoy these videos, please consider subscribing, liking and sharing this channel with others who might also enjoy them.
Thanks so much for watching. As always, I welcome any comments, questions or suggestions.
Follow Last Leg Woodworks on Instagram:
/ last_leg_woodworks
My Website:
www.lastlegwoodworks.com
Affiliate Links:
Get the Freshest CA glues in the market at Starbond
www.starbond.com/?rfsn=441875...
Use Code LLWW15 at checkout to save 15% OFF on your purchase

Пікірлер: 66

@zjdoliver 5 ай бұрын

Hi, Thank you for this video. I recieved my P2 a few days ago along with the RA2, followed your instructions and the tumbler came out perfectly. The only thing I was not sure about is how you determined 14mm distance from laser to tumbler.

@donpa08 Жыл бұрын

Very nice overview. Just setting up for a 20-tumbler order on a new P2 and that helped. Thank you.

@jsairam108 5 ай бұрын

This guide is absolutely excellent. Thank you for the lesson.

@808girl2 6 ай бұрын

Your a great teacher! Thank you for the info! Mahalo 🤙🏽

@kenledbetter4979 7 ай бұрын

I've got a P2 and had my RA2 for a few months and not taken it out of the box, your video was a big help.

@RobertHenderson-dt7kp 8 ай бұрын

Great video, one of the easiest to follow. Thank you!

@LastLegWoodworks 8 ай бұрын

Thanks! Glad it was helpful!

@ss220astro Жыл бұрын

Great overview.

@PowellTimberWorks Ай бұрын

You earned a solid follow for this.

@awags2281 Жыл бұрын

Great job on this easy to follow very helpful! Got my sub!

@LastLegWoodworks 8 ай бұрын

Thanks!

@jamespelt3651 8 ай бұрын

Excellent video, thank you. I use the RA2 with a D1 Pro, and consider myself to be a fairly experienced user, nonetheless I learned several good tidbits from your video.Thanks again!

@LastLegWoodworks 8 ай бұрын

Thanks! Glad it was helpful!

@paullarregle9668 Жыл бұрын

thank you it helps ! I tried to engavred glass, but without the riser base it sees to be completed. I used the roller but i can not determine which number put in the material heigh. Either the laser broke the glass or does not mark it at all...

@margohenderson2877 Ай бұрын

How did you determine the size of the letters? I understand about the width of the cup changing but how did you determine without a lot of trials? Is there some kind of ratio? Loved the video and will refer back to it.

@tracybabington9535 26 күн бұрын

What did you measure to get the 88mm diameter? I have a design but not sure where to put in the measurements because when I did it tried to wrap the whole design around the tumbler vs keeping it in a general area how you did with the tennis rack and name. I just don't know what I'm missing to not understand how to do that.

@Seven_Craig 9 ай бұрын

Suggestion: level your tumbler and shim the open end of the rotary. Works for me. What was you total burn time? Great video!

@LastLegWoodworks 9 ай бұрын

That’s what I did, at 5:15. Is that what you mean?

@RNMEDIC1335 9 ай бұрын

Oh wow, this is great!! So I am in my first couple days of owning my very first laser, the xTool P2. This is perfect. The only question is what are you measuring for the distance where you got 14mm? thank you in advance for any help.

@RNMEDIC1335 9 ай бұрын

I just watched your engraving on the Ukulele and you mentioned it there. thank you.

@LastLegWoodworks 8 ай бұрын

Sorry for the delay. Have fun!

@jeremiahjohnson8989 10 ай бұрын

Mine keeps saying element out of processing area. Any ideas?

@justineolausen1115 6 ай бұрын

Would the rotary attachment work on a wine bottle cut? As in the design engraved all around not just on the front of the glass?

@LastLegWoodworks 6 ай бұрын

Yes, absolutely, the rotary tool can continually rotate.

@hectorrivera6624 9 ай бұрын

What do they means by "distance" and how you determine it? What distance is being measured? Im new to this. Thanks

@LastLegWoodworks 8 ай бұрын

The machine has an automatic measurement feature that uses a laser pointer to measure the distance to the work piece.

@zookirider 8 ай бұрын

When doing a longer name on the Tumbler, do you continue reducing by the .8mm or is there a stopping point?

@LastLegWoodworks 8 ай бұрын

Hello, If the entire part of the tumbler that will be engraved is tapered then yes. If the taper were to stop before the end of your engraving then the letters wouldn’t need to be changed after that point. Hope that helps.

@swollco.3202 8 ай бұрын

Awesome video, I'm new to my P2 and learning every time I use it.. I learned a lot with your video but still have a question... the measurement of the DISTANCE ?!?! How did you do it?😅

@LastLegWoodworks 8 ай бұрын

On this project I used the automatic distance measurement that the P2 designated. It uses the red laser pointer to measure distance to the work surface.

@simonbrooke639 6 ай бұрын

If I’m doing glass and I don’t want to mask it, I can’t use automatic measurement, so what does this distance refer to? I’m guessing it refers to height above the top of the slats (when fitted). Maybe a future enhancement but shouldn’t the auto measure feature work the highest point for itself, given an approximate starting rectangle?

@craigkeller6083 9 ай бұрын

question I do my tumblers using the rollers. in the xtool software you have to put the laser on the highest point of the cup. Then in the software you have to place the green line in the center as well. This making you line up the design to the edge of the green line in the software. If I want to line up to an existing logo on the cup this makes it not very easy. Am I doing something wrong. Due to not lining up to center of the design this makes it hard to do.

@LastLegWoodworks 8 ай бұрын

Right. I know what you mean. I've had to use some trial and error a bit on some projects to get things exactly where I want them. I hope xTool changes that process.

@CJICantLie Жыл бұрын

My RA2 pro doesn't have the aviator connection for the P2. Do you mind doing a conductance check and posting the pinout that the cable has? I have some aviator connectors and some stepper wires and can make my own, but rather not trial and error my connection.

@LastLegWoodworks Жыл бұрын

Sure! no problem. I can do it today.

@LastLegWoodworks Жыл бұрын

Try this link. Note the orientation of the rectangular plug with the two tabs, and the round plug with the indentation at the bottom. Also the rectangular plug only uses 4 of the 6 spaces. Hope this helps! www.dropbox.com/scl/fi/rdd3yx8u4kci12c39ifs7/R2pinout.jpg?rlkey=qodrr3nlapau9rxeui2wj8o2x&dl=0

@CJICantLie Жыл бұрын

@@LastLegWoodworks Awesome, Thanks so much. Will save me so much time.

@DanH37ww 5 ай бұрын

Did i read this correctly in the comments? That engraving only took 5 min to do? Thats good i think. I'm looking to get something to replace my basic glowforge.

@willLol 5 ай бұрын

Correct, all depends on size and detail. I just did a 40mm by 20mm logo on a cup with my P2 and it took 2 minutes and 30 seconds.

@Sheiisashley Жыл бұрын

the rotary tool fits in without the riser?

@petergamache5368 11 ай бұрын

Just measured it on my own P2... This works without a riser base but is limited to the smallest diameter (A) roller setting. You cannot use the chuck or any other RA2 accessories. To do this, remove enough slats to place the roller base in the tray, which puts the top of the rollers at about the same height as the slats. This lets you engrave round items (pencils, pens, dowels) up to about an inch in diameter.

@villy4083 10 ай бұрын

Is this the same Ra2 Pro, that is used on the M1?

@LastLegWoodworks 8 ай бұрын

Yes. same one, just a different cable.

@TF21FUL1 9 ай бұрын

Does it come with an adapter for the p2

@LastLegWoodworks 9 ай бұрын

It doesn’t come with it but I believe xtool will send you a cable for the rotary tool if you contact the company.

@austinraabe2684 9 ай бұрын

The distance of 14mm is from what to what and how did you determine this distance?

@hectorrivera6624 9 ай бұрын

I been wondering the same thing.

@LastLegWoodworks 8 ай бұрын

I believe I had previously let the machine do an automatic measurement and it came up with that number. Then I just re-used it on the next tumbler. Hope that helps.

@hectorrivera6624 8 ай бұрын

@@LastLegWoodworksThank you!

@hectorrivera6624 8 ай бұрын

@@LastLegWoodworks I see, Thank you!

@zvlvcorp Жыл бұрын

Why didn't you use the curve feature?

@jenniferv6429 Жыл бұрын

I'm not sure that works with the rotary attachment

@gustavobaeza3890 Жыл бұрын

How long it took to complete the engraving?

@LastLegWoodworks Жыл бұрын

I think about 20 minutes.

@gustavobaeza3890 Жыл бұрын

@LastLegWoodworks omg if someone orders 30 Tumblers, it would take 10 hrs.. plus all the extra work can be 15 hrs. It is a lot, have you used the XTOOL F1? Seems to be faster. Good video.

@dillonohrt1903 10 ай бұрын

@@gustavobaeza3890I’ve got the F1 also, but haven’t tried it yet with the rotary. That this is crazy fast

@OPD574 2 ай бұрын

I have the F1 and do a lot of tumblers. This seems faster especially with that clean of a result. @gustavobaeza3890

@aliaksandrakarneyenkapusku9025 7 ай бұрын

So how do you calculate the reduction for letters? cause cups come in different. Thanks in advance

@LastLegWoodworks 7 ай бұрын

Well I found out by making the mistake of not making any adjustments for my first one. I noticed the letters gradually changed as they travelled up the tumbler. I just measured the difference between the first letter and the last letter and divided that amount between the total number of letters. I’m sure there is some mathematical way that is beyond me to figure that out, but I did it the hard way😊

@jeffcollingsworth3332 11 ай бұрын

😞 Promo SM

@LastLegWoodworks 8 ай бұрын

@jppalm3944 Жыл бұрын

So 20 tumblers, 20 different names, you have to adjust letters of every name. Nah

@dillonohrt1903 10 ай бұрын

The only time I’ve ever adjusted was for circular shapes, never had an issue or complaints about “misshapen” letters. Agree, this is a miss by the KZfaqr

@JayBates 10 ай бұрын

Only if the letters are in the vertical orientation. If you have them below the design it's not a concern.

@LastLegWoodworks 8 ай бұрын

Its not a circular shape that causes the issue, its the conical shape of the tumbler. With the letters running along the length of a tapered tumbler. (as in this video) You tell the rotary tool what the circumference of your tumbler is, but its only that circumference at one spot. Along the taper it changes. So if you want say, 14mm tall letters, the rotary tool is rotating a certain amount to result in that 14mm letter. But if the circumference is larger than the measurement that you entered, then more surface area will pass under the laser tip, causing the resulting letter to be taller, and if its smaller, then less will pass under resulting in a shorter letter. I didnt realize this until I had engraved a tumbler with all the letters at the same height and the letters gradually got larger as the moved up the taper on the tumbler.

@7divad37 2 ай бұрын

why are people so bloody lazy. Having to do it with an engraving tool would kill you....