XTOOL S1 1064 nm Infrared Laser Module. Engrave on white tile without marking spray

Рет қаралды 10,944

6 ай бұрын

XTOOL S1 1064 nm Infrared Laser Module review. Engrave on white tile without marking spray, engrave any metal and beautiful jewelry. Also the S1 infrared laser does an amazing job of engraving on plastic . #xtool #xtools1 #xtoolIR
IF YOU WOULD LIKE TO SUPPORT THE CHANNEL AND PURCHASE ANY OTHER STUFF THAT I MAKE YOU CAN DO THAT NOW HERE. www.skylerewing.store
BUY XTOOL IR LASER HERE: www.xtool.com/?ref=X2PoN3Fj-V...
========================================================
Affiliate Links
=========================================================
The links in my video description are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase
xTool 1064nm Infrared Laser Module for xTool S1 Laser Engraver - High Precision Engraving on Metal, Plastic, Acrylic Materials, Ideal for Jewelry Making, Gift Making,Laser Etching Numbers and Logos.. amzn.to/3UuQxDR
35 Pieces 4 Inch Blank Ceramic Coasters, Unglazed Ceramic Tiles Coasters, Ceramic Tiles with Cork Backing Pads for Painting, DIY Crafts, Mosaics, Square, White by GNIEMCKIN.. amzn.to/3STtp0k
20 Pieces Blank Challenge Coin Threaded Edged 40 mm with Acrylic Protection Box Laser Engravable Pattern for DIY Crafts Engraving Travel Birthday Commemorative Collection Supplies (Yellow). amzn.to/4by44AI
NationInFashion 4 x Stainless bar Necklace Blank | bar Stamping Blank | Stainless Stamping Blank| bar Necklace Stainless Steel| Stainless Stamping bar. amzn.to/3UxPTFu
Acrylic Black PLEXIGLAS Plastic Sheet Round Circle DISC - 4" Diameter X 1/8" (Pack of 2). amzn.to/3useaSR

Пікірлер: 44

@rayk9315 5 ай бұрын

You never cease to amaze me.

@jenda3322 5 ай бұрын

Jsem velmi rád,že používáte různé technologie a laser je dobrá volba ok.👍

@garychaiken808 5 ай бұрын

Great job. Thank you 😊

@woodworkingwithSkyler 5 ай бұрын

Thanks for watching!

@ferdbirdut 2 ай бұрын

Thank you for adding your coin with my order. I am making you a gift also. It should be completed soon.

@RoyWCanada 5 ай бұрын

Hi Skyler , I was unaware there was such a thing as an infrared laser so thank you for showing and explaining this. I agree files you demonstrated came out excellent. Thank you for your video looking forward to the next one. ⭐⭐⭐⭐⭐

@woodworkingwithSkyler 5 ай бұрын

Thank you. When I first heard about IR lasers I thought they were a gimmick. Then I tried mine and loved it:)

@woodhobbygn-be 5 ай бұрын

What settings did you use for the tile. Didn't hear it right i think. 10X speed? Is that 10mm/Min? Thx for the video

@grahammacneill2298 5 ай бұрын

Thanks for the video, this looks like a versatile laser, I think it will meet my needs.

@xiomarasuarezr 3 ай бұрын

Hi, im a beginner from mexico, and im starting to desperate deeply, i recently bought the xtool s1 40W machine, its been a week and i cant engrave any metal, i have been watching every tutorial here, can you tell me please with your experience does the 40W laser can engrave metals? or did i had to buy the 2W laser? thank you

@williamfoster7920 Ай бұрын

How long did it take to engrave the coin? Just wondering about the speed of infrared engraving. Thanks.

@JosephBegley-gf5rn 3 ай бұрын

Hi there, I am wanting to get a photograph engraved on stainless steel using the X-tool S1 with the 2w IR laser. I am based in the UK and wondering if you are able to do this? if so please reach out to discuss further. Many thanks, Joe

@MrGeri95 2 ай бұрын

I see bees😮

@NadeemZurbaArts 5 ай бұрын

Very talented! From Photography to wood working :) How deep (how many mm?) the S1 can engrave into plywood/hard wood, and which head you recommend? Infrared 2W or 40W? thank you.

@woodworkingwithSkyler 5 ай бұрын

Infrared will not Marc the wood. Infrared is only for metal and plastic. The 40w laser head will engrave pretty deep, depending on setting. You could easily go as far as 1/4 in or more.

@CoffeeJake 5 ай бұрын

For the coins we’re you engraving or just marking them? Do you feel the IR laser is a must to add?

@woodworkingwithSkyler 5 ай бұрын

Marking them but I can definitely feel the engraving. So is definitely a little scratch on the metal. If you plan on engraving metal or plastic, IR definitely a must have. I don’t do metal or plastic so not necessary for me

@CoffeeJake 5 ай бұрын

@@woodworkingwithSkyler thank you!

@dog0311 4 ай бұрын

Do you or anybody know if there is a material library to add to lightburnn for the presets?

@woodworkingwithSkyler 4 ай бұрын

I thought you just log onto Xtool and it should just show. The new Xtool software update that will be released on 12 definitely has it. They sent me the beta version, planning on playing with it today

@charlesthompson1584 5 ай бұрын

What settings did you use for the necklace? I really enjoy your videos! Very nice!

@woodworkingwithSkyler 5 ай бұрын

Power 100 speed 20

@charlesthompson1584 5 ай бұрын

Thank you so much! I need to do one for Valentines day! @@woodworkingwithSkyler

@deanmartin7593 5 ай бұрын

Hi Skyler. Have you tried it with light or socket face plates? To indicate what each switch turns on/off for example. I’ve seen some multi switches in kitchens for isolating the oven, fan extractor, fridge, etc.

@TubeDaLube 5 ай бұрын

Great video 👍But you do not mention anything about the time it takes,i have a feeling ir is sloooooow in a gantry style laser.....i would believe ir is mainly for galvo style...just my opinon though 😉

@woodworkingwithSkyler 5 ай бұрын

Yes, you are right

@groverearp2600 5 ай бұрын

Hi Skyler, it's Grover. Even though I have little interest in Laser , THIS is another amazing video ! I heard a rumor that you got a new table saw.

@woodworkingwithSkyler 5 ай бұрын

Hi Grover! Thank you! Yes, I did:)

@jimponchetti4155 5 ай бұрын

@grover2600, your lucky to get a direct reply from her.

@hanswichmann5047 5 ай бұрын

Will it do my old DVD's? Love your stuff...

26 күн бұрын

Can infrared laser engrave on wood also?

@woodworkingwithSkyler 25 күн бұрын

No. Only metal and plastic

@chrisoliver3851 5 ай бұрын

Hi Skyler thanks for another terrific video ! Please tell me where you purchase the black round acrylic disc from...Thank you

@woodworkingwithSkyler 5 ай бұрын

I just added to the description

@HMKRG 5 ай бұрын

Is it difficult for beginners to learn without any prior knowledge?

@woodworkingwithSkyler 5 ай бұрын

No. It is easy and intuitive

@user-fj2gn5rk7e 5 ай бұрын

Would like a link to your photography KZfaq material

@raymondharvey7439 5 ай бұрын

hi skyler. why have you switched from wood turning to using lasers and cnc's i enjoyed your wood turning. now i am dissapointed. sorry.

@tracynovak7433 5 ай бұрын

Don’t understand. She’s never done woodturning. She has done woodworking.

@philipershler420 5 ай бұрын

@@tracynovak7433And just recently Skyler reviewed her brand new SawStop table saw. You can see it in the background of this video.

@GroundedFlyboy737 5 ай бұрын

I'm sure she doesn't even own a lathe?

@philipershler420 5 ай бұрын

@@GroundedFlyboy737Not yet, but give her a few more days.

@GroundedFlyboy737 5 ай бұрын

@@philipershler420 😀

@JosephBegley-gf5rn 3 ай бұрын