xTool S1 40W: The new king of fully enclosed diode laser engraver with super strong cutting power

Рет қаралды 32,340

Күн бұрын

00:00 Intro
02:58 Setup
04:30 First test, 4mm plywood engraving and cutting
08:07 Photo engraving at 600mm/s & 250mm/s
09:56 Thick wood cutting 16mm plywood, poplar wood and red oak
11:42 Testing the 2-point marking system with more materails: Aluminum coated card, Slate coaster, PLA 3D printed part and black acrylic
16:46 Curved material engraving
18:52 Riser base & Conveyor feeder testing
21:03 Pros and Cons
Affiliate Links:
xTool S1 40W Laser Engraver:
US: bit.ly/xTool-S1
EU: bit.ly/xTool-S1-EU
UK: bit.ly/xTool-S1-UK
xTool Black Friday Sale & Cyber Monday Sales (Ends on Nov 30):
$200 off $2299 (CODE: XTCUT200)
$150 off $1699 (CODE: XTCUT150)
$250 off $2999 (CODE: XTCUT250)
After the above codes expire, you can still save $80 by using the CODE: AURORA80
FlexiSpot Standing Desk:
Use the exclusive code 'AT30' to get $30 off your E7/E7pro/C7 purchase and for a chance to win a free order.
US: 7qy0.short.gy/TrJVmS
CA: 7qy0.short.gy/QN9odl
Aurora Tech Channel 3D Printers, Laser Engravers, and CNC Machines: Price Tracker and Recommendation List:
auroratechchannel.com/
Other xTool Machines:
xTool P2 55W CO2 Smart Laser Engraver:
Review Video: • xTool P2 55W CO2 Laser...
US: bit.ly/xTool-P2
EU: bit.ly/xTool-P2-EU
UK: bit.ly/xTool-P2-UK
xTool F1 10W Diode + 2W IR Dual Laser Engraver:
Review Video: • xTool F1 laser engrave...
US: bit.ly/xToolF1
EU: bit.ly/xTool-F1-EU
UK: bit.ly/xTool-F1-UK
xTool D1 Pro 20W laser engraver:
Review Video: • xTool D1 Pro 20W laser...
US: bit.ly/US-xTool-D1-20W
EU: bit.ly/EU-xTool-D1-20W
UK: bit.ly/UK-xTool-D1-20W
xTool M1 fully enclosed laser engraver:
Review Video: • xTool M1 fully enclose...
US: bit.ly/US-xTool-M1
EU: bit.ly/xToolM1EU
UK: bit.ly/xToolM1UK
Laser Cutting SVG:
Ninja Star
svgsilh.com/image/153835.html
Dragon
svgsilh.com/image/1325223.html

Пікірлер: 60

@justinchamberlin4195 6 ай бұрын

This might sound unhinged, but the most thoughtful thing in the entire printer may very well be the straps used to lift it out of the box. Despite all the nice features, that might be the one I like the most.

@khayfer 6 ай бұрын

Thank you so much for this review! I saw another review video come up on my feed and I knew I had to search for your review. We are looking to add a laser machine to our makers' studio and your reviews have helped us in the past to make good choices.

@andrewwoulfe6579 6 ай бұрын

Very thorough review. Best one on the S! I have seen thus far. great work!

@mariabarbat1717 5 ай бұрын

Excellent review. You were very thorough and I learned quite a bit about the alignment. Great job!

@thingswelike 6 ай бұрын

That conveyor makes it pretty versatile! I was only considering CO2 until now, so this is very interesting! Cheers!

@stephenf98 6 ай бұрын

Great review as usual. I agree with you that it did come up short with working area width of 18" instead of 24". Most of my big pictures are 22". For $3K complete, it's a nice deal.

@MakerPi_3d_Printer 6 ай бұрын

Very professional video as always.

@MosiacMeditation 4 ай бұрын

Very informative and good presentation! Thank you!

@hodanotyoda 6 ай бұрын

Good review!!!

@rubencampos1873 5 ай бұрын

Great Video, hard not to subscribe... Look forward to watching more videos from you guys...

@CarlosElPeruacho 6 ай бұрын

We have a Glowforge Pro, it struggles to do some of the things done here, and plain cannot to others. We don't even use the passthrough because it's such a pain to use. It's done well over the years but when it finally dies I'm happy to know there are more affordable and capable machines on the market to replace it.

@ajvaldez 3 ай бұрын

Great Review, I am thinking of buying one but still not sure which one will suit me and my business. thanks so much for this awesome review!

@katzenbaer3065 5 ай бұрын

Can you please review the thunder bolt 30watt laser? I love your videos you’re making. They are so helpful!

@user-jf5br4ew5r 6 ай бұрын

Dear Aurora, thank you for you review. I think it would be a good idea to acquire a power meter (Watt meter) to check the specification. In my opinion, often a Chinese Watt is less than an US Watt. Thank you. Kind Regards Albert

@Liberty4Ever 6 ай бұрын

It's great to see diode laser cutter/engraver systems offering features previously found on CO2 lasers, while also providing low cost options for the occasional user who may only need to do some engraving on small objects. The XTool software is very powerful but is only available for Windows, Mac, iOS and Android - NO LINUX FOR YOU!

@hypnoz7871 3 ай бұрын

No Linux is a shame. But virtual machines make everything run on it.

@SABlister 6 ай бұрын

thats a cool cat

@steadylake1084 6 ай бұрын

Awesome video. One question though. Could this cut through brass?

@tihzho 6 ай бұрын

Scuptfun now have a 40W laser

@JunkieVirus 6 ай бұрын

bought one, based on your review.

@rim4iks 3 ай бұрын

How is it?

@graemebrowne1463 6 ай бұрын

Do you know if there are any laser cutters than can have the head be tilted in the X and Y directions ? This would allow dovetails, bevels and conical holes etc to be cut.

@laurv8370 6 ай бұрын

Excellent review. However you didn't put the finger on the most painful spot of this machine, the lifetime of the diode gun. Kudos.

@frankgillespie 4 ай бұрын

I'm looking to purchase an S1 very soon. Where and when is the best time and place to purchase one ? U did a fantastic review.

@TestTest-eb8jr 6 ай бұрын

Great review 👍 🖒 👍@Aurora

@Loudsilence709 5 ай бұрын

I think you should be using the exact same filament among all printers for most accurate results as filaments really vary in quality/ flow/ temps etc.

@JuppsWerkstatt 6 ай бұрын

Very good laser... I would like to test it too :-) Many greetings Jupp's Werkstatt

@korhal2005 4 ай бұрын

what would you recommend. The Xtool S1 or Wecreat Vision?

@randomtvninja 4 ай бұрын

Maybe its your calmer demeanor, but other reviews I've seen make the Xtool out to be a mircle worker, but it didnt do so well in some of your tests, or maybe im reading way too much into thr "alright". Yet you've said this is now a #1 laser engraver for you.. I guess the question is, who should buy it? How much of an all rounder is this device. Especially if someone is willing to spend that amount, which by far isn't the most expensive pro-sumer price but isn't the cheapest either.

@bsimmons00 3 ай бұрын

Why aren't the cuts through 1/2" materials straight (vertical)?

@fin3125 4 ай бұрын

Can it cut acrylic?

@ajrenee07 5 ай бұрын

We are looking into buying one and will need to engrave metals, such as tools. I saw your video on the F1 that it worked just fine, but you did not show that in this video. Is this machine capable of that?

@lamberthugh8316 Ай бұрын

This machine is equipped with a 2W infrared head. You can use it just like the F1.

@TunaSoda 6 ай бұрын

Can a diode laser not cut clear acrylic that is still coated on both sides with its paper peel-offs?

@lamberthugh8316 Ай бұрын

Yes, it can.

@marklengal9990 6 ай бұрын

It baffles me why they didn’t add a camera like on the M1. And with the M1 you can’t upgrade the laser.

@I-LOVE-EARTH 6 ай бұрын

It was in my opinion a stupid decision not to include a camera and the reason why I am not buying one. And don't believe their excuse of costing too much to add.

@master-gbig1140 6 ай бұрын

It looks like diode lasers have come a long way in 4 years, and I'd like to get one. "Do you think the xTool S1 40W is a good choice to start with?

@AuroraTech 6 ай бұрын

If budget is not the primary concern, this is the best diode laser I have ever tested, it's now ranked #1 on my recommendation list.

@daxmcanear 6 ай бұрын

What if budget is a concern? What would be your recommendation for best value?

@khaldeyahawwad3557 2 ай бұрын

Can it cut mirrored acrylic?

@AuroraTech 2 ай бұрын

As a diode laser, it cannot cut through transparent or reflective materials unless you use a marking sticker or paint to make them dark.

@AndrewAHayes 6 ай бұрын

Its a great machine but out of my budget, I would have to use it to make money for me to justify buying one of these but I have enough on my plate with my 3d printing commisions at the moment, I have a modded K40 that I bought about 5 years ago and I do want to upgrade to something that has better quality and speed but I would prefer to sell the K40 first!

@carbide1968 6 ай бұрын

I want one, but have no idea why but i'm sure i would sell products for extra income?

@cedarandsound 6 ай бұрын

You neglected to mention that when cutting 16mm plywood in one pass, you all but turned the bottom layers to charcoal from just how burned up they got. It's a cut but not a clean one.

@MrDaneis 6 ай бұрын

Shame that it can only fit 18" and not 24". Kind of a deal breaker for the everyday person...

@silverback3633 6 ай бұрын

Still can't cut clear acrylic?

@abrahamevangelista4215 6 ай бұрын

I’d be curious to see how the IR laser performs for that.

@silverback3633 6 ай бұрын

@@abrahamevangelista4215 I am wondering about that but it is only 2W and can engrave metal. Then it should be able to cut 3mm acrylic or more.

@mtz3843 9 күн бұрын

can get a wecreate for 1800 an thats with the rotary with it and wood, so no xtool

@I-LOVE-EARTH 6 ай бұрын

Why does the conveyor come with goggles if the S1 is a Class 1 laser?

@AuroraTech 6 ай бұрын

when you feed a long board through the machine, it's not fully enclosed anymore.

@I-LOVE-EARTH 6 ай бұрын

Thanks. Interesting that they don't mention this on their website. @@AuroraTech

@johndoe6032 6 ай бұрын

It was pretty underhanded of xtool to eliminate the 40w module for the D1 just to upswell people to this machine. They’re already very overpriced when compared with other quality lasers. For that money I’d rather just spend a bit more on a budget CO2 or spend half as much for the Ikier K1 Ultra 48w laser.

@I-LOVE-EARTH 6 ай бұрын

Totally agree. xTool is more profit centered vs. customer centered.

@I-LOVE-EARTH 6 ай бұрын

They crippled the laser by not including a camera.