xTool Screen Printer: Your Complete Guide

Рет қаралды 11,998

Күн бұрын

The xTool Screen Printer is fairly new on the market and it takes screen printing to a whole new level! Use your laser to make screens for shirts and so much more. If you have ever dreamed of easily making your own screen print screens, this may be the product for you. I am going over how to make the screen as well as use the screen printer to make a shirt. The kit actually comes with everything you need to get started except for your xTool laser. Watch and see how to use this one and perhaps decide if this is right for you!
This laser was sent to me by xTool, however, all projects and opinions are my own.
Links below may be affiliate links.
Get the xTool Screen Printer:
Multi-Color Kit www.xtool.com/products/xtool-...
Basic Kit www.xtool.com/products/xtool-...
Get the xTool S1: bit.ly/42PnRHW
Free laser buying guide: www.laser-ready.com/
Free My Y'all is Authentic SVG file: angie-holden.ck.page/75e2423b90
Find Pigskins and Pigtails on KZfaq: / @pigskinsandpigtails
Other videos you may like:
Laser Safety Video • Laser Safety: Safety T...
More About the xTool S1 • xTool S1 Laser: Setup ...
Be sure to follow me on social as well!
Instagram / angieholdenmakes
Facebook / angieholdenmakes
TikTok / angieholdenmakes
#xtool #xtoolscreenprinter #screenprinting
0:00 Introduction
1:00 What can you print?
1:54 Adding screen to frame
6:05 Locating in laser
7:10 Designing screen
9:30 Burning screen
10:33 Assembling screen printer
13:57 Printing a shirt
18:32 Accessories
20:36 Reusing screen
21:20 Which lasers work?
22:02 Which ink?
22:11 Pros and cons
24:16 Wrap up

Пікірлер: 55

@jaggedoriginals 6 күн бұрын

Thanks for another great tutorial video. You are my go to when I'm looking for something.

@AngieHolden 5 күн бұрын

Glad to help!

@thetwilightsown 2 ай бұрын

Hands down best tutorial on this kit! Thank you!

@AngieHolden 2 ай бұрын

YAY! Thanks!

@spritecut 2 ай бұрын

Thank you, really informative and wonderfully presented. Good luck with your T-shirts too.

@AngieHolden 2 ай бұрын

Thank you kindly!

@WanaBeKenobi 2 ай бұрын

Seriously, awesome rundown of how this thing works. I'm getting one within the month to work with my M1. On a lighter note, we jokingly thought about initiating a drinking game for every time you said the word 'Location'.

@AngieHolden 2 ай бұрын

Oh there are probably a TON of drinking games that can be played during my videos! I have just learned to accept that!

@MagsSubbly 2 ай бұрын

Best video I've seen explaining every part and what it does...thank you so much for your simple explanation on how to use it...how do the shirts hold up with washing

@AngieHolden 2 ай бұрын

Screen printing is one of the best methods you can use for shirts that will last a very long time in the wash!

@MagsSubbly 2 ай бұрын

Thank you

@pattishelton3169 2 ай бұрын

This is awesome thanks.

@HopeDesigns 2 ай бұрын

This is so helpful 😊

@AngieHolden 2 ай бұрын

Glad you think so!

@jrhodes3216 7 күн бұрын

Angie you are the best teacher I have ever had… love you! Question tho… so once the screens have been lazered they are “permanent”… right? I can’t go back and make another design on that same screen? Seems like 3 replacement screens are $50 CDN (which is… $$$ no?) I’m curious to know how often you have used your setup and how fast you have gone thru the 3 screens that came with it and how many extra screens you think you or the average crafty queen will end up having to get? I love this setup but it kinda seems like the “consumable” price is a bit high, no?

@AngieHolden 5 күн бұрын

I have just kept my screens and not replaced them. I would see this as a method to make permanent screens for a screen printing business.

@parrot-imagellcadronecompa6148 18 күн бұрын

Great video thanks

@AngieHolden 16 күн бұрын

Thanks for watching!

@EricPham-gr8pg Ай бұрын

Liquid resin can be used to design phototronic cell for computer light cpu

@lyndamoore8576 Ай бұрын

Thank you for your reply about being able to use the Xtool screen printer with M1. Are the dimensions of the screen printer the same as those of the M1? Have you tested using the screen printer with the M1? If so, I am wondering if there is a difference if any. Thank You. You have been such a help with your tutorials.

@AngieHolden Ай бұрын

yes the screen printer itself is the same. You do need the riser base with the M1.

@ManiBlacktiger7 24 күн бұрын

Thanks for this review! It was super helpful but could I get some suggestions? I ran my design using the following settings: Power :90 Speed :50 Lines per inch: 200 I have a lot of fine details and halftone accents that didn’t engrave through! What setting would you suggest for this? 😮

@AngieHolden 24 күн бұрын

I used the default setting in xTool for screens for this and didn't have any issue.

@purplecookie687 5 күн бұрын

Hey the instructions actually show the fixing plate being installed on the other side we are using the riser base or do we install it as you did? Thank u

@AngieHolden 5 күн бұрын

Yea it does now say the other side! I don't think it said that when I did mine but it does now!

@rlaureng 2 ай бұрын

To keep shirts from shifting between ink passes or if you print with more than one color, you could use pallet tape and some water-based adhesive, like used with conventional screen printing. Out of curiosity, since I know you've printed with conventional screens before and can compare, for people with texture issues involving touching metal mesh like me, is the metal mesh a different feel under the squeegee? I feel like I could hear the difference, though it might be my hypersensitivity speaking.

@AngieHolden 2 ай бұрын

I felt like the first few swipes felt way different then I was okay!

@dianemaines3880 23 күн бұрын

if you were printing a bulky item like a hoodie sweatshirt, is there enough room for the bottom of the fabric to bunch up and sit near the hinges? It doesn't look like there's a lot of space for excess material.

@AngieHolden 22 күн бұрын

There is NOT a ton of space there so a bulky item may have issues!

@TJRusk-vz8to 20 күн бұрын

Hi! I’m looking at getting this kit, but I already have an atom stack laser engraver and I use lightburn. Would I still be able to use my engraver with this kit, or would I NEED to get an xtool engraver? Hope that makes sense. Thank you!

@AngieHolden 19 күн бұрын

I have not used this one any other laser machine. Not sure how you would locate it inside of your laser and on the screen for burning.

@jaggedoriginals 6 күн бұрын

I came here to ask if it can be used with a different brand laser. I have the wecreat and would love to know if it's possible. 🤔

@Bubblestheghost Ай бұрын

I might have missed it, but can you use the M1 10w Xtool laser on the screens?

@AngieHolden Ай бұрын

You can. You may need the riser base for that one though.

@19mmontes 2 күн бұрын

Mine didn’t bring the plate to place it on the laser, I think that is a a little misleading, that was bigger factor to buy mine, I’m super disappointed. ☹️

@lyndamoore8576 2 ай бұрын

I would like to be clear about using a screen printer. You used the S1. Is it ever possible to use a screen printer if one only has the M1 and is interested in using one color ink?

@AngieHolden 2 ай бұрын

If you add the riser base, you can use it with the M1.

@k1wiz 2 ай бұрын

How to do you heat it to make it stay?

@AngieHolden 2 ай бұрын

That depends on the ink. I would check with the ink brand that you use as I find they have slightly different instructions for setting.

@sandramccandless2286 2 ай бұрын

Can you explain why the F1 and M1 will work with basic kit but not the multi kit? I was under the impression the only difference between the 2 kits is the basic kit just has less screens, paint and frames. Otherwise they work the same? The multi kit I was told was just a better buy. Since the F1 is portable and can be placed on the screen to burn it seems the only limitation would be the size of the design if using the F1. However, As for the M1 I understand that is the only machine that can not be used with the screens because you can not fit the screen in the M1 in order to burn the design. If I have this information wrong could you please let me know. Thank you

@magic1nds 2 ай бұрын

yes i agree i was under the same impression.. i want to knwo why you cant use the F1 also I heard you can also use it on other lasers too its just you cant use the perfect alignment tool unless it fits that particular laser. or maybe you could even 3d print a frame to align it to your laser I'm sure there is a work around here , mines coming today so we shall see.. I will message xtoool also I think

@AngieHolden 2 ай бұрын

I think they may be saying that the alignment will not work which is what you would need to do to make multiple colors.

@SirwanFatah 2 ай бұрын

clean with water! please more explain. how to clean an prepare for another job.

@AngieHolden 2 ай бұрын

Sure! I took it to the sink in my kitchen and used the sprayer and literally just sprayed it down then wiped away any excess with a paper towel. It was SO easy!

@susandean5553 2 ай бұрын

im sorry neat product but price wow i screen print with just screens and ink my own designs or cut out with a cutter or purchase stencils and by the time screen was set into frame i would have 10 shirts done and i can print on anything

@susandean5553 2 ай бұрын

ty for showing

@AngieHolden 2 ай бұрын

I find this quicker than other processes that burn a screen like the Ikonart.

@ShyneflowLC 2 ай бұрын

Do you need a new screen for every new design?

@AngieHolden Ай бұрын

Yes you will. You can reuse the frame but the screen itself is permanently that one design.

@santiago.g2483 6 күн бұрын

You can apply a new layer of emulsion (to make a new design) IF you remove all the previous emulsion from the screen. I'm not sure how many times you can do this, but I'm sure you could at least change it a few times. Look up "Reusing xTool Screen Printing Screens" on KZfaq by "Heath Sharp". He discusses exactly how to do this. He used Emulsion Remover by Ecotex and a bucket of Water Resistant Screen Printing Emulsion (also sold by Ecotex if you dont know of any other brands) to apply a new layer.