This J-10A realistic aircraft is made entirely of EPO foam material and is equipped with a 90mm electric duct of the 6S/8S. The entire aircraft is painted Air Force gray and equipped with realistic details such as missiles and auxiliary fuel tanks. It can be said to be the most exquisite real-life foam aircraft currently. It has 6S and 8S power options. The 6S power is enough for me to fly like a real aircraft. It can also be equipped with a flying wing flying guard gyro. I think the J-10 is an extremely easy-to-fly aircraft, so I did not choose a gyro.
Generally speaking, Feiyi's J-10 aircraft model is really unexpected. First of all, it uses a Chinese aircraft as a prototype to make an aircraft model. You must know that such aircraft can almost only be sold in China. Secondly, it has a very high degree of authenticity. It is rich in engraved lines, antennas, and structural parts. When it flies, it can really look fake.
Brand: ‪@freewingmodel977‬
Model: J-10A
Power: 6/8S 90mm electric duct
Recommended battery: 6/8S 5000-6000mAh Lipo
Equipment used by Haozi:
‪@FrSkyRClive‬ X20PRO remote control, ‪@TattuUAV‬ new avionics 6S 5100mAh 75C battery
这款歼10A像真机整体为EPO泡沫材料，搭载6S/8S的90mm电动涵道，全机喷漆空军灰，搭配了导弹、副油箱等像真细节，可谓是现在最精致的泡沫像真机。他有6S和8S动力可选，6S动力对于我飞像真机来说足够了，还可选配飞翼飞行卫士陀螺仪，我觉得歼十属于极其好飞的飞机，所以没有选择陀螺仪。
该机出厂完成度极高，所有的电子设备、连杆结构等均安装完毕，到手大约30分钟即可组装完成，主要零部件不需要胶水，机翼为快接卡扣固定，鸭翼和垂尾为螺丝固定，腹鳍、导弹等为卡扣固定，像真零件例如仪表、天线等需用胶水粘贴。
飞行性能上，它属于鸭式布局的飞机，大三角翼使得整机升力巨大，在无挂载情况下可以轻松完成大迎角起落，满挂后的大迎角性能稍有降低，但对正常的特技飞行没有影响。动力上6S基本可以完成垂直爬升，所以大角度爬升、大半径筋斗等动作就不在话下了，只是横滚动作有些别扭，它的横滚类似于桶滚，并不是绕机轴滚转，这就稍微需要几个起落去适应，不过这也让它能飞出极其类似真机飞行表演的特技动作。
总的来看，飞翼这次的歼10像真机确实出乎意料，首先是竟然以中国飞机作为原型制作航模，要知道这样的飞机几乎只能在国内销售。其次是它的像真度极高，丰富的刻线、天线、结构零件，飞起来真是可以以假乱真了。
品牌：‪@freewingmodel977‬ 飞翼模型
机型：歼-10A
动力：6/8S 90mm电动涵道
建议电池：6/8S 5000-6000mAh Lipo
昊子使用的设备：
‪@FrSkyRClive‬ X20PRO遥控器，‪@TattuUAV‬ 格氏新航电6S 5100mAh 75C电池