Yamaha Grizzly 700 Main drive oil change.

No video

Yamaha Grizzly 700 Main drive oil change.

Рет қаралды 10,424

Күн бұрын

2017 Yamaha Grizzly Rear Final Drive Gear Oil Change. Pretty simple to do and takes less than 10 minutes. Always refer to your owner and service manual.
Drain Plug: 6mm Allen (17 ft-lb or 23Nm)
Filler Bolt: 21mm (17 ft-lb or 23Nm)
Oil Level Check Bolt: 10mm (7.2 ft-lb or 10Nm)
Oil: Yamalube Friction Modified Plus Shaft Drive Oil (.22L or 220cc)
Anti- Seize: loctite anti seize

Пікірлер: 19

@btrent9244 2 жыл бұрын

A 2 beer job!!! Very good. Thank you. 👍🇺🇸

@enzok2749 5 ай бұрын

1st step....Coors Light

@drdwgmd14 Жыл бұрын

LOL on da cold beer!

@virginiatrailcameravideos 8 ай бұрын

Hello. Could you share the name of that lift you are using? Thank you.

@battlebornatvoutdoors610 8 ай бұрын

Good morning, it's the Titan Distributors Inc. Lightweight Aluminum Stand for ATVs Four Wheelers Lawn Mowers with 2,000 LB. I bought off amazon but I checked and it's showing unavailable from Amazon. Here is a link to a website that has them. I hope this helps. www.discountramps.com/atv/lifts-jacks-stands/p/332023/

@fleece192 9 ай бұрын

Dude. Too many CL I would say.. tighten by feel.

@battlebornatvoutdoors610 9 ай бұрын

No such thing as too many beers and I torque everything to spec. I'm never in a rush so I take my time, enjoy tunes and some adult beverages..

@randysheetz224 Жыл бұрын

there is 2 drain plugs rear and one more to the front which one do you drain

@battlebornatvoutdoors610 Жыл бұрын

On the rear diff you should only have one 6mm allen bolt for the drain. At least mine does.

@andrewbalcom8081 6 ай бұрын

@@battlebornatvoutdoors610yea it is kind of weird on the Kodiak 700 they have 2 drain plugs in your rear differential, maybe has something to do with the rear wet break system 🤷. Manual is not very clear which one has to be removed .

@battlebornatvoutdoors610 6 ай бұрын

I would remove the filler bolt up top 1st, then remove the drain plug which is at the lowest point on the differential. Once the oil is drained I would remove the second bolt just to make sure no oil comes out. Kinda of weird, the 450 and Grizzly only has the one.

@r3ddog700 3 жыл бұрын

I’m a new Grizzly owner. What is that torque wrench you use?

@battlebornatvoutdoors610 3 жыл бұрын

I have a craftsman for my inch pound and an old Snap-On made in the early 60's for my foot pounds. The Snap-On was passed down to me from my grandfather and is hands down the best tool I own.

@r3ddog700 3 жыл бұрын

@@battlebornatvoutdoors610 Thank you Sir. I’m going to change my front and rear fluids on the Grizzly. Can’t figure out the best Torque wrench for the Grizzly.

@battlebornatvoutdoors610 3 жыл бұрын

@@r3ddog700 Any decent brand torque wrench will do.the majority of maintenance only requires an inch lbs torque wrench.