Yamaha QL series and DANTE Firmware Update DO it Properly

No video

Yamaha QL series and DANTE Firmware Update DO it Properly

Рет қаралды 24,368

7 жыл бұрын

Make a backup of all your scenes and files. Read the firmware upgrade pdf. I hold no responsibility if you do it wrong
and cause damage to your device.
1: Format the USB from Yamaha QL5
2: Download the QL5_firm404.zip from Yamaha website , extract it.
3: Copy MQLP4_04.PGM , QL-MD103.BIN & Dante FWUpdate_QL5_v38024_sw127.dnt in the root director of the USB .
4: Disconnect all the LAN cables from Dante and other cards & make note of them where exactly they go back.
5: Switch the QL5 off , insert the disk and switch it on , follow the instructions as shown in the video.
6: Once upgraded then connect all the LAN cables back and check the functionality of the desk operation.
7: Put network settings back.
Total upgrade time 16 minutes.

Пікірлер: 18

@JoelRodriguez-cw6pj 7 жыл бұрын

Extremely helpful, thank you!

@djmattbarry5121 7 жыл бұрын

Very helpful video, thanks a lot!

@AVMEVideos 7 жыл бұрын

Thanks for watching .

@TrygviRestorff 4 жыл бұрын

Hi nice video. Would you please make a video tutorial on "how to update firmware on RIO 1608 D stagebox. How updatet my mixer, but I'm having trouble to update my stagebox. Yours T

@AnilKumar-zo2eu 11 ай бұрын

Thank you so much sir for your packaged information.

@AVMEVideos 10 ай бұрын

So nice of you

@brahimazlague5559 7 жыл бұрын

good job

@tonypruitt5580 7 жыл бұрын

Hey, thanks for the demonstration. Does the update will reset some of my routing / Patching or Setup.is it enough to safe my setting before updating and load it back in again? Thanks

@AVMEVideos 7 жыл бұрын

Yes you would need to save your config before you start the process & reload everything as it will reset the desk to factory deafults inluding scences etc .Once updated then upload your config and all should be working as usual . I would highly recommend to read the official Yamaha upgrading pdf before doing anything. Thanks for wacthing

@djmattbarry5121 7 жыл бұрын

Have you made a video on how to update the rio3224D firmware ?

@AVMEVideos 7 жыл бұрын

as of now no , next time I come across one then will make a video about it. Here is Yamaha official link & guide. www.yamahaproaudio.com/global/en/downloads/firmware_software/rio/rio3224-d_firm_latest.jsp

@djmattbarry5121 7 жыл бұрын

Thanks a lot !

@yunaflores9900 4 жыл бұрын

Matthew Barry j888

@yunaflores9900 4 жыл бұрын

AVME Videos 779gq Udjaead8

@brahimazlague5559 7 жыл бұрын

if i have QL5 V4.02 .i need to update name sub cpu

@AVMEVideos 7 жыл бұрын

No , I believe that is the latest .so name sub cpu should be on latest as well.

@brahimazlague5559 7 жыл бұрын

but for update CL5 console??????