In my quest to lower the weight of my Tenere 700 I've fitted a full exhaust system upgrade. I've used the 2.1 kilo Akrapovic header, the Camel ADV enduro bend connector, and then finished it off with the beautiful Scorpion Red Power slip-on end can. These alone reducing the weight of my T7 by six kilos! In this video I'll show you around the bike, how it looks, of course how it sounds (as much as a video will allow), and of course maybe a little road test and 'fly-by' plus a quick chat on what's next for the Rider Guider #T7. This is not an install video, this was not that difficult to fit with some basic mechanic tools on hand, 60 - 120 mins however if you have any questions on fitting please ask or comment and I'll be more than happy to give my advice. #yamahatenere700 #akrapovic #cameladv #scorpionredpower #tenere700 #riderguider #theriderguider #lessismore #adventuremoto www.adventuremoto.com.au/camel-adv-products-t7-high-exhaust-enduro-bend www.akrapovic.com/en/intro?returnUrl=%2F camel-adv.com/ www.scorpion-exhausts.com/ antigravitybatteries.com/

You can had a extender for the sensor, the sensor changed position from Euro 4 to Euro 5 models

Great video man thanks for sharing, I just placed my order for the Camel kit as well, been waiting for over a month to receive that ''back in stock'' txt lol....... ordered a full black widow exhaust kit to go ahead and get things prepped. That skid plate is a nice piece with wrap around coverage, where did you find it?

Looks great. I may do the headers

People who have dynoed the t7 say it runs lean as standard. Headers will make it even leaner. Needs to be put on a dyno and have a custom map to get the most benefit and ensure the bike is not running too lean, which is not healthy.

That's gorgeous buddy 😍👌👌

hey bud was wondering something abouth your headers ! wath did you do with the shouldered bolt head who screw into the oem mid pipe ??

did u do ecu reflash??

Nice! Would love to lose 6 kilos both on my T7 and myself!

The color LCD display for 2023 with the app tie-ins looked wonderful and then now I learned the US 2023 models don't have it. WTH?

already tuned bro? what i can say is i blow my x adv 750 engine because upmap (remap) just my 2 cents, dont remap, etock ecu perfectly fine, bikes now use wideband sensor, there is lot more margin, never damage engine ;) anyway remap makes more responde power that is true, i feel it, but is enough to risk engine?? ;) even akrapovic tells dont need....

Thanks for the vid. How are the Camel ADV enduro bend and Scorpion can holding up? After endless research, its my preferred option, getting that exhaust tucked away where it should be. Only reluctance is taking a hacksaw to the subframe. Think you've made the right choice to lose some of that weight, your reaction out on the bike tells you all you need to know 👍

Wow, so the OEM header is almost 8 pounds? (4 Kilos). I did not realize it was so heavy. The bike looks amazing and sounds fantastic - great upgrade, Neil. I am curious to know - with the full Akra header replacement - did the bike require an re-tune/re-map for the proper fuel/air mix?

What skid plate and crash bars are those???

Hi there!! Great videos to help us all take decisions! I have the rally bend from camel ADV and I’m planning on saving weight with the headers. I couldn’t find if you are using stainless or titanium headers from akrapovic, could you confirm? Thanks!!!

Did you have to do a dyno tune afterwards and if so how? Looking at doing the same system as you.

Really curious how much of a feel difference the wheels will get you.

Thanks for sharing. Looks and sounds good. Ordered the HP Corse high exhaust but I was reluctant in changing the headers due to Euro 5 cat. Some say an ECU remap is needed after deleting the cat. Looks like you installed the Scorpion headers on a EURO 5 bike so you have a CAT delete as well. Any negative effect on the bike you noticed ? Any errors on the dash or OBD scanner ?

Is it worth the money? Would be an expensive process to drop that much weight

Hello, what about side lateral bags ? Do you have same possibilities you have in standard versione ? What about passenger side footpegs ?

is that full exhaust too loud? Will my neighbors hate me in the morning?

I have the same exact setup on my T7. Just did it today. My only concern is that the camel adv bend is extremely close to my swing arm. When I step off the bike, the swing arm does barely kiss the camel bend pipe. I think it has something to do with the akro headers. Did you have a problem with this? I also noticed akro doesn’t use the stock exhaust mount under the bike behind the oil pan. Kind of weird for how much the headers cost

Great job, what bash plate is that.

You be careful loosing all this weight next thing you know you'll float away in a gust of wind. So what you seem to be telling me is that if I buy a load of expensive parts for my bike and tell the wife I need the money for a weight loss program that will get her all excited. Right I'll try it. I wonder how much I can spend before the Penny drops! That sounded really good with the mike at the back of the bike. I take it that those things that look like little handles on the pipes are actually heat shields, or am I wrong? Thinking about it you ought to have bought a Honda the exhaust system would have lasted much longer than this! 😉👍😂😂🤣🤣 Ride safe and all the best to you both. (I meant you and Chantal not you and the Tenere) 🤣🤣

Get a tune if you want it to be more lively.