Yamaha v-star buffle removal the correct way..
Рет қаралды 4,326
Жыл бұрынi have a 2007 vstar 1100 and this exactly what i did to remove the buffle and the best way of doing it.
@reservationsdept5069 8 ай бұрын
Thanks Bro! I just spent 3 hours with a 1.5" hole saw and while I did get it drilled, I cant get it out. Going to get a 2", finish drilling it out and going with he screw driver and hammer. Thanks for the honesty, I dont understand why all the videos show just drill and pull.
@SuperVincef 6 ай бұрын
Thank you. Took me 3 hours also but thanks to your video it worked. I just took my time.Sounds awesome now.
@2-meanls3s56 6 ай бұрын
Glad it was helpful!
@2-meanls3s56 7 ай бұрын
Glad it was helpfup brother.
@not_quite_djyt8778 5 ай бұрын
Why dont you just use the 2" ?
@Curious_Skeptic 3 ай бұрын
Think I'll buy a straight chrome set of pipes, LOL. Feel like that would be the best way. This is just too jinky for me.
@2-meanls3s56 3 ай бұрын
Thats what i ended up doing, actually after a few miles of driving it, it wasn't having enough back pressure so i ended up removing those pipes and installing a couple of aftermarket chrome pipes
BalcevMMA_BOXING
Рет қаралды 9 МЛН
KiKiDo
Рет қаралды 3,9 МЛН
RevZilla
Рет қаралды 591 М.
EL Latingo
Рет қаралды 20 М.
BalcevMMA_BOXING
Рет қаралды 9 МЛН