Рет қаралды 776
(PART 3 OF 4) Re Assembling the transmission from our 2016 Yamaha YXZ 1000R to do the upgrade and gear swap to the lower range 2019 Yamaha YXZ1000R gearing. This is the assembly phase where I put the gears into the box. This will lower the overall range of the gears to prepare for larger tires. I upgraded the clutch to an Alba Racing 6 spring style pressure plate with Alba Heavy Duty Clutch Friction Plates and the Alba Heavy Duty Drive Shaft / Driveline Coupler with upgraded silicone grease boot. This is part 3 where I focus on just putting the transmission back together ( reassemble ) while it is out of the SXS / UTV. In the next video, I will reinstall the gearbox back into the YXZ chassis and drive it after bleeding the clutch.
YXZ1000R 2019 GEAR REDUCTION KIT BY WELLER RACING
www.wellerracing.com/YXZ1000R...
YXZ1000R GEN 2 CLUTCH KIT WITH 6 SPRING PRESSURE PLATE CONVERSION BY ARMAT / ALBA RACING
teamalbaracing.com/i-23900093...
YXZ1000R HEAVY-DUTY DRIVE SHAFT COUPLER AND SILICONE BOOT
teamalbaracing.com/i-23900127...