Yeswelder Flux-135 PRO | Review and Usage

Рет қаралды 2,803

Ай бұрын

Buy it here: amzn.to/4et1iOn
This is the newest yeswelder flux core welding machine. It has a new digital display, does lift tig welding and arc welding as well. Very budget machine but it had very decent results

Пікірлер: 32

@jessekintigos4290 Ай бұрын

Thanks for the review!

@jensendesign4920 Ай бұрын

Cool thanks

@glasshalffull8829 23 күн бұрын

Great video man. Very helpful 💯

@jensendesign4920 22 күн бұрын

@glasshalffull8829 thank you

@fpsfein Ай бұрын

I recently bought the same welder and I'm new to welding but everywhere has been saying you don't push flux core you pull. If you push you'll get peroxidy.

@jensendesign4920 Ай бұрын

True facts. I had the wire speed way to high. Once I turned the wire speed down all was good. Have you used the machine very much?

@fpsfein Ай бұрын

@@jensendesign4920 I actually haven't used it at all since it shows up on Thursday. I just like to look up all the information I can about things I'm getting into beforehand. Plus my twin brother is a certified structural welder so he's been giving me advice and is going to help out with the learning process.

@gambitdesert8500 9 күн бұрын

Great info honest info have a good one

@jensendesign4920 6 күн бұрын

@@gambitdesert8500 thank you

@deepwinter77 15 күн бұрын

I suspect the 3 volts is the trim for that setting you can probably go - 3 & + 3 Im just guessing though.

@jensendesign4920 15 күн бұрын

@@deepwinter77 I have figured out it doesn't give you much control. The 3v is just kinda a fine tune. It sets the power when you tell it what size wire

@deepwinter77 14 күн бұрын

@@jensendesign4920 Yea i've seen similar trim options, Tbh You can get relatively cheap flux core welders without the crazy screen and digital stuff. It's going to be more reliable having less delicate components imo maybe a small display for voltage would be ok.

@dracodraco1982 12 күн бұрын

@@jensendesign4920For what it's worth, my understanding is that it's not just the wire size that sets the volts, it's the speed. Wire size + speed = whatever setting YesWelder believes is optimal, and the -3 to +3 is for fine tuning. I have the machine, but the project it was for got scrapped so haven't used it yet. Read the manual, though, and watched oodles of guides; still mean to learn, just haven't had a chance to try yet. Nice review, by the way. :P I know newbies seem to like it, but it takes more experienced folks to have a better feel for what's actually good, and what's merely adequate or iffy.

@RIPSlawd Ай бұрын

How thick of material would you trust this to weld up to? I’m thinking maybe 3/8ths if you did multiple passes, but I’m not sure if it would be able to

@jensendesign4920 Ай бұрын

I would stay under 1/4 and prep everything really good. 3/8 if you preheat and multiple passes, maybe. Still would switch to a bigger welder

@dracodraco1982 12 күн бұрын

Pretty sure the tech sheet says 3/16ths max, but I've seen folks push it to 1/4 and do alright -- not great, not ideal, just okay. You've got to keep in mind, a lot of flux core wire isn't made for multiple passes. (I'm a newb who hasn't even started yet, and I don't recall the /why/, but you can get wire that allows it.)

@timothyweinert4488 10 күн бұрын

Is the yes welder 135 argon compatible

@jensendesign4920 9 күн бұрын

@timothyweinert4488 nope no gas. It will do tig but the gas runs through the torch lead and has a control knob on the torch handle

@mehmetaliaydin7463 Ай бұрын

Does it work with 220v?

@jensendesign4920 Ай бұрын

No the 135 pro is just set up for 110v

@stoneyisland1491 Ай бұрын

How would you know the amperage on this machine?

@jensendesign4920 Ай бұрын

You kinda don't. But my little Lincon welder just has a b c d settings sooo.....

@gregricksjr.5464 Ай бұрын

It tells you on the paper that comes with the machine. Wire speed goes with volts. Then they allow you to adjust the amperage within volts within 3 up/down.

@stoneyisland1491 Ай бұрын

@@gregricksjr.5464 thanks man i ordered it and yes it does have a paper that’s tells you.

@gregricksjr.5464 Ай бұрын

@@stoneyisland1491 that’s good. I have the same welder and I really enjoy it. I’m new to welding and learned from KZfaq. I’ve made some really nice welds. I just pay attention to my puddle.

@jensendesign4920 Ай бұрын

@@gregricksjr.5464 You read the directions??? Damn good job