Fibaro Smart Implant - Setup and usage guide

Рет қаралды 20,572

4 жыл бұрын

How to add a Fibaro implant and how to use it as a sensor device or a mini remote switch device.
========================================================
If you enjoyed watching these videos and they help please donate with this link:
www.paypal.com/paypalme/yorks...
========================================================
Dont forget to subscribe............

Пікірлер: 11

@andrewfidel2220 3 жыл бұрын

Can you configure all of these settings through standard zwave parameters? Looking to wire up some load cells for measuring the weight of propane tanks and wondering if I could use this with a 0-10V load cell amplifier with a non-Fibaro controller.

@YorkshireAutomation 3 жыл бұрын

hi, you need a controller to configure all the parameters before you can setup to use a 0-10v load cell.

@rexgold101 4 жыл бұрын

Thanks for this... very helpful... I am using SI with my HikVision Alarm Output so it notifies me if a line is crossed... only thing I can't get to show up on my Smart Implant is, if I leave the settings for Input Configuration to Not Used then, then, when I join the Yellow and Blue cable, I get the alert... if I change the Input Config to Binary Input and Motion Sensor, I don't get the alert coming thru.. do I need to change something else??

@YorkshireAutomation 3 жыл бұрын

HI, sorry for late reply didnt get the alert - the config needs to be changed to Binary Input NC - so when line breaks occur it send the alert out to you.

@rexgold101 3 жыл бұрын

@@YorkshireAutomation strange.. thats exactly what I had it set to.. and the alert was not picked up.. ironically, not setting it, I get the alert.. how strange...

@YorkshireAutomation 3 жыл бұрын

@@rexgold101 strange but at least it's working!

@rexgold101 3 жыл бұрын

Yorkshire Automation yep.. this is what I find little concerning about Fibaro... it works mostly... just not 100%.... still, better then most of what is on the market in the price range. Have a good weekend...