Get The Tire Clearance You Need! - Toyota 4Runner Viper Cut

Рет қаралды 19,608

Күн бұрын

In this video, we do a viper cut to our Toyota 4Runner to gain needed tire clearance up front and some styling points. Not only does it help with bigger tires but it looks cool too. It's not easy cutting into a 2022 Toyota 4Runner with 1000 miles but you gotta pay to play. If you need any guidance on this job please feel free to ask! Thanks for watching!
▼Shop the Products featured in this video!▼
yotaxpedition.com/
Our Website and Socials
Website | yotaxpedition.com/
Facebook | / yotaxpedition
Instagram | / yota_xpedition
Tik Tok | / yotaxpedition

Пікірлер: 49

@trailrunnah8886 Жыл бұрын

I usually think the viper cut looks terrible, but since you did the lower cut instead of the high cut, it actually looks pretty good.

@yotaxpedition Жыл бұрын

We are going to be cutting higher when we install the C4 bumper with viper cut extensions.

@omk316 2 ай бұрын

I want to do this but I’m sketched out with debris shooting up in there. 😅

@ChiefJJ09 Жыл бұрын

Great video on the viper cut. I have it on the list to do to my 22 runner.

@yotaxpedition Жыл бұрын

Wasn't too bad of a job. It sucks to cut it up but it definitely looks good.

@Juan234alv Жыл бұрын

Looks good. Less extreme than you regularly see. Good job dude. (I went steep on mine but I love all viper angles)

@yotaxpedition Жыл бұрын

Thanks! Less extreme but still plenty of clearance.

@FLAMPER427 Жыл бұрын

Looks awesome! nice job!!

@yotaxpedition Жыл бұрын

Thanks!

@Ib-yb8dp Жыл бұрын

Great video! Any issues with debris or dust shooting back up? Also wondering if this affects MPG? I want to do a love viper cut like this but wondering if there will be issues without getting the additional protection.

@yotaxpedition Жыл бұрын

No issues at all. Also, you will not see any difference in mpg. If you're worried about protection, C4 makes a skid plate for the washer fluid tank. We have them available on our website.

@davidstokes925 Жыл бұрын

Nice!

@yotaxpedition Жыл бұрын

Thanks!

@petrodvirnik1322 7 ай бұрын

I have the same problem

@rob4f258 Жыл бұрын

Whats the name of the smaller saw-like tool that you used to cut the remaining bumper? I'm going to need this for that angle cut. Thanks

@yotaxpedition Жыл бұрын

Air saw, you can grab a cheap one from harbor freight. Works great!

@247kwalk 9 ай бұрын

Whats the dimensions on that cut

@toooodie8750 Жыл бұрын

trying to find this washer reservoir cover specifically - can i get it by itself ?

@yotaxpedition Жыл бұрын

The C4 one? Yes, you can buy it by itself. Here is the link yotaxpedition.com/products/4runner-windshield-washer-tank-skid-5th-gen-2010?_pos=14&_sid=29e087319&_ss=r

@jasoncutmore7400 Жыл бұрын

Best 4Runner channel out there!

@yotaxpedition Жыл бұрын

Thanks! Means a lot!

@ironmendm9 Жыл бұрын

what's offset on the wheels? also what kind of upper control arms?

@yotaxpedition Жыл бұрын

Stock upper control arms and the wheels are 17X8.5 0 offset

@Herobe15 Жыл бұрын

How did you end up securing the liner on the driver side?

@yotaxpedition Жыл бұрын

I didn't do anything with the driver's side. It hasn't given me any issues. It seemed sturdy enough to let it go.

@petrodvirnik1322 7 ай бұрын

Like it

@alromero5685 Жыл бұрын

Is there a template to make that cut easier?

@yotaxpedition Жыл бұрын

Not currently but we thought about making a template for people.

@jdsayler96 10 ай бұрын

@@yotaxpeditiondid you ever pursue doing a viper cut template?

@trevorharlan4136 Жыл бұрын

How much lift do you have on the vehicle?

@yotaxpedition Жыл бұрын

Roughly 2.5" up front and 1.25" in the rear

@Checkmat8 Жыл бұрын

There’s no rubbing ,if you turn the volume up..😂

@yotaxpedition Жыл бұрын

This is true lol

@joshbordo 6 ай бұрын

Hi what wheels are those??

@yotaxpedition 6 ай бұрын

These are Fifteen52 Range HD wheels

@joshbordo 6 ай бұрын

@@yotaxpedition do you have any wheel spacers on?!

@yotaxpedition 6 ай бұрын

They are 17x8.5 et0

@joshbordo 6 ай бұрын

@@yotaxpedition nice! What's the oem rock slider part number that are on that 4runner?

@brandong2331 Жыл бұрын

Is there a lift on this 4runner?

@yotaxpedition Жыл бұрын

Yes we currently have an ICON stage 1 lift kit on it.

@2-old-Forthischet Жыл бұрын

I'm not a fan of the 5th gen looks because of that Darth Vader grill (I have a 4th gen). Now that you've made your Toyota more off road worthy, your mall crawl pass has been revoked.

@yotaxpedition Жыл бұрын

Lol, sounds like something a 4th gen owner would say...jk ❤

@2-old-Forthischet Жыл бұрын

@@yotaxpedition funny thing, I just bought this 4Runner 3 months ago. Yes, I had choices but opted for this one because of the V8 and 4wd. I'm an old fart and the Darth Vader look is really overdone.

@America1st69 Жыл бұрын

The problem is you couldn't afford a 5th gen

@2-old-Forthischet Жыл бұрын

@@America1st69 you're absolutely correct. Prices are ridiculous for high mileage examples. The 2003 V8 4wd 4th gen I bought last November just turned over 202,000 miles.