You can build this Lumber Storage Rack!

Рет қаралды 186,141

Жыл бұрын

Пікірлер: 52

@keatonbeyerwoodworking Жыл бұрын

I have one I made just like this, built the same way. The problem I found over time is the boards, with enough weight, tend to tip down as they compress the 2x4 blocking. If I were to make it again I'd put them at a slight angle to keep boards from sliding off the front. I fixed it with shims. Another fix would be to not hoard as much wood 😂

@EveningWoodworker Жыл бұрын

To counteract that, I cut the blocks and supports at a 5 degree angle angling up so it eventually will level out.

@keatonbeyerwoodworking Жыл бұрын

@@EveningWoodworker makes sense!

@stringlarson1247 11 ай бұрын

I live in a historic district and grab old 'scrap' wood that people are throwing out. Old 'soft woods' get really hard over time as the sap hardens/crystalizes.

@pirakoXX Жыл бұрын

Great idea, but I would make an 85 instead of 90 degrees cut on all the parts, which is just as easy to cut and assemble the same way as seen here, and the 5 degrees angle will prevent any lumber to fall out of the rack and harm anyone. Stay creative and safe /Pia

@EveningWoodworker Жыл бұрын

It's hard to see in the video, but all of the cuts are actually at a 5 degree angle. So yes, you're exactly right!

@user-cu2nb5dt4v Жыл бұрын

Works great! Ive multiple comments on mine. And it holds a ton of weight! Thanks for the idea. Much appreciated!

@davidrosa5516 Жыл бұрын

Great idea! Tyvm! Keep them coming

@EveningWoodworker Жыл бұрын

Thanks!

@rb-ex Жыл бұрын

good idea, nice build

@mikedixon8741 Жыл бұрын

Brilliant!

@marcusviniciusdeoliveira8269 Жыл бұрын

Excelente idéia 🙂 parabéns 👏👏👏👏

@lloydthegreat7851 8 ай бұрын

Great idea! Thanks.

@hbsbos 11 ай бұрын

what a simple and great idea. thank you!

@AnthonyStabler Жыл бұрын

Nice music.

@ClydeFollett-ck2hd 3 ай бұрын

I used your plans and everything worked great. Thanks

@EveningWoodworker 3 ай бұрын

Great to hear!

@8balllarrey878 11 ай бұрын

You just gave the greatest idea I was looking for. Keep up

@EveningWoodworker 11 ай бұрын

Thanks I'm glad it helped!

@TarzanArmani007 11 ай бұрын

Very cool. Imagine the strength of it had glue and was made from hardwoods!😮

@dogzer 11 ай бұрын

Cool!

@papawd3991 Жыл бұрын

Subscribed, Excellent work

@EveningWoodworker Жыл бұрын

Thanks!

@stringlarson1247 11 ай бұрын

This is why I always load up 'scrap' wood and save it whenever I see it driving around the old 'hood on trash night.

@davidr8860 Жыл бұрын

Man I miss my Vega fence

@stevenrodrigue7366 11 ай бұрын

You never ever cut a piece of wood between a stop clamp and a blade without holding it down

@joeblow9180 11 ай бұрын

I like how it almost busted when you hung on it 😂😂😂😂😂

@davidmj54 3 ай бұрын

What do you think this cost versus buying Bora wood storage devices for $50?

@EveningWoodworker 2 ай бұрын

If you already have scrap wood, then it's free!

@wittworks Жыл бұрын

Festool makes a great storage rack. Just kidding.

@EveningWoodworker Жыл бұрын

Ha! and it's the only lumber rack that costs $2300. But man it holds that lumber better than any other rack

@junkmail4613 Жыл бұрын

I love when the load shifts and you have a lapful of lumber!!! You know I'm right. Within 30 to 40 years. Come back an' tell me I'm wrong, meanwhile I'm right!!!

@CLove511 Жыл бұрын

If that's your lumber storage in 30 to 40 years, you're woodworking wrong.

@roccojohnson4600 10 ай бұрын

I prefer vertical. Takes up less space.

@EveningWoodworker 10 ай бұрын

That works too, unless you want to use the space below.

@OneOfEightBillion 8 күн бұрын

It's common knowledge that the best way to store lumber is flat

@kabornat8340 10 ай бұрын

Put a splitting knife on that table saw already mate

@EveningWoodworker 10 ай бұрын

Don't worry I have since replaced that tablesaw.

@trick58 Жыл бұрын

Are they lag bolted into studs?

@EveningWoodworker Жыл бұрын

Yes the lag bolts go directly into studs

@DavidRodriguez-me4ny 10 ай бұрын

Coartando madera preciada a lo wey!!! 👍🏽👍🏽😢

@peterieck1963 7 ай бұрын

4 inches thanks for the bullshit part. Thanks for saying 4 inches or whatever. All people of learning levels needed now.

@shop970 11 ай бұрын

Except. . Nobody stores dimensional fir. . .

@EveningWoodworker 11 ай бұрын

Well... unless you plan on using it later 😉

@e.v.d5595 11 ай бұрын

Neisss

@user-fi2cn5gy9m Жыл бұрын

Tem que mostra trabalho em outro tipo de madeira 🪵

@TDDMS Жыл бұрын

What's the name of the song?

@plumbthumbs9584 Жыл бұрын

i'd like to know too, great music!

@carlgauthier7219 Жыл бұрын

@@plumbthumbs9584 elevator john - blue brothers

@AverysMan1105 Жыл бұрын

K.i.s.s.

@charliecaltagarone9234 Жыл бұрын

Any measurements?

@EveningWoodworker Жыл бұрын

The full video gives more specifics: kzfaq.info/get/bejne/ntaDdK6CrqeuoIU.html