YOU MUST WATCH!! B4 you buy a Wildtrak Roller lid. PX2 VS PX3 Design

No video

YOU MUST WATCH!! B4 you buy a Wildtrak Roller lid. PX2 VS PX3 Design

Рет қаралды 17,953

2 жыл бұрын

In this video I show what to look out for when buying a 2nd hand Wildtrak roller lid. I will also point out what lids not to buy.
WHY LISTEN TO ME? I have fitted over 300+ of this style of lid for my Customers all over New Zealand. I know them inside out and even single nut & bolt and I make them 100% watertight when fitted.
Over the years I have seen first hand the evolution of the design of these lids from the very bad PX1 to the ok PX2 and into the great PX3 and then the perfect Electric Roller lid.

Пікірлер: 40

@stuartjones1751 6 ай бұрын

Thanks Joel great video

@joeldstirling 6 ай бұрын

Thank you, glad you liked it. Will be doing a fitting video soon of them.

@Synfulz Жыл бұрын

I have this style on my Ranger. Nice and watertight and secure.

@joeldstirling Жыл бұрын

Yes they can be made water tight if you fit them and seal them up as you go

@maxsimovic2100 Жыл бұрын

Hi mate. Great video! Would you mind making a video on how to install? Would be extremely helpful!!

@joeldstirling Жыл бұрын

Will do soon. Just need a lid and Ute now

@markgoodall2580 Ай бұрын

Hi excellent video did you ever get a chance to make a install video? thanks

@chrisduckworth2022 3 ай бұрын

Hi Joel.. hoping to pick your brain on the PX1 Wildtrak roller shutters. There are 2 black L shaped brackets on each side that bolt up under the roller shutter track and then bolt onto what looks like an identical bracket that is fixed to the tub somewhere. Can you advise what the brackets fixed to the tub are screwed into and how solid this might be ? I have accessories fitted to the roller shutter track that sometimes get on the heavy side and I am not sure how strong the roller shutter track is as Mountain Top say one thing and Ford say another....

@joeldstirling 3 ай бұрын

They sound like the bracket that holds the front of the wikdtrak tub liner in place. If you are not using the wikdtrak liner then they will not be needed

@rodsinclair2642 18 күн бұрын

Hi there I have a question I purchased a 2018 wildtrak went to use roller door lid for first time and there was a screw that holds the cover on lodged inside roller mechanism and it's scratched right along all slates. Took back to dealer they opened up and found it they can't work out how it got there and said maybe even from manufacturer it could have been lost and lodged there interesting original owner and salesman when opening didn't scratch it only when I got home and tried it it's somehow lodged there. No missing screws from cover either?

@joeldstirling 17 күн бұрын

Hard to know sorry. Easy for a screw to had been left on top of your roller lid. Maybe even if they changed the number plate over or something. Hard to know if the screw is from the lid without seeing a photo of the screw.

@SinoilJr Жыл бұрын

Hi Joel, thanks for your videos! May I ask: is it possible to install the shutter without installing the other frame with the roll bar?

@joeldstirling Жыл бұрын

Unfortunately not

@ant6369 Жыл бұрын

Hi, thanks for your great content. Just wondering if a later model 2019 wildtrak shutter would fit a earlier model 2012 XLT ? 👍🏼

@joeldstirling Жыл бұрын

Yes it will

@cruzefrost7918 2 ай бұрын

What about a wildtrak shutter that’s been taken off a 2020 model, will it still fit on a 2013 model XLT ranger?

@komangputra4920 23 күн бұрын

How to remove high mount break light, it stoping the sailplane. Thanks

@joeldstirling 23 күн бұрын

You need to pull it off and then get a blanking plate to fit into its place or duct tape over the hole. If you pull the black plastic cover towards you with your finger nails in under the plastic it will pop this cover off. You will then see the 2x tork screw’s you need to undo

@paradox_panther9726 8 ай бұрын

Hey mate have you installed a sailplane on an xlt? Running into issues with what seem to be the alignment pins on the bottom. Do holes need to be drilled out for them?

@joeldstirling 7 ай бұрын

Yes grind them off or drill them out with a 16mm hole saw

@dominique4822 Жыл бұрын

Salut Joël, Petite question stp, est ce que je peux monter un rideau Ford Ranger Wildtrack T8 de décembre 2022 sur un T7 Wildtrack de 2018, les deux sont des super cab. Les fixations et plastiques sont-ils compatibles ? J'ai peur comme tu le montre que ce ne soit pas possible. Thank

@joeldstirling Жыл бұрын

Yes you can you just need to make up the wire loom

@joelfisher4641 2 жыл бұрын

Hey how you going mate I’m currently trying to install electric roller off wildtrack onto my fx4 2017 any chance you could do a video or give me any tips with it thanks 👍🏼

@tilingtrans Жыл бұрын

Hey mate, I am about to attempt to install a 2021 wildtrak x electric roller on my 2016 xlt and can’t find much info.. how did you go with yours if you don’t mind me asking? 🍻

@jakehoulihan4427 Жыл бұрын

@@tilingtrans hey mate I’m doing the same to my 15 xlt. Did you find any info at all?

@joeldstirling Жыл бұрын

Will do this year as soon as I can get a lid and a ranger

@clintgiddings2103 2 жыл бұрын

Do you have any installation video guides?

@joeldstirling Жыл бұрын

Yes I will make one soon

@rohanmccloskey4347 8 ай бұрын

Hey Joel. I have a 2020 Wildtrak & have a small amount of water coming through the slats. Can this be fixed?

@joeldstirling 8 ай бұрын

No not with ease. Maybe been cut or damaged by the sun

@jjsmusic2210 6 ай бұрын

Hey mate will a 2018 Lid fit on a 2019 BT-50?

@joeldstirling 6 ай бұрын

Yes it will. You will just need to drill the holes into the tub liner for the drain tubes

@jjsmusic2210 6 ай бұрын

@@joeldstirling Cheers mate

@stevengruber9538 5 ай бұрын

Hi Joel, will a 2021 wildtrak shutter/roller fit a 2012 xlt cheers

@joeldstirling 3 ай бұрын

Yes it will. Just make sure you get the Wildtrak Tub liner too

@jamcam5180 Ай бұрын

2022 px3 roller shutter on a px1 2012 ranger?

@joeldstirling Ай бұрын

Yes that will work

@jamcam5180 Ай бұрын

@@joeldstirling bit more info. 2022 Px3 wildtrak shutter on a 2012 xl ranger

@jessemartin6461 Жыл бұрын

Hey Joel do you know if its possible to remove the sail plane and keep the shutter? Looking to use the extra space for a roof top tent. Cheers

@joeldstirling Жыл бұрын

Unfortunately not