Рет қаралды 10,330
👉 Can program any radio that uses a k-connector and does not have a built in serial chip.
👉 Can work digital modes on any app or radio that uses a k-connector - APRS, FT8, Winlink, Vara, etc - Via direwolf or aprsdroid or etc.
👉 Get your AIOC from ebay at: geni.us/ryO5
👉 Github Repo: github.com/sku...
👉 Firmware Update:
Download Latest Release from Github: github.com/sku...
Unplug the USB Cable from the AIOC Board
Short the two outermost pins in the row of header pins
Plug the USB Cable into the board and computer
Commands:
cd ~/Downloads
sudo apt install dfu-util -y
dfu-util -a 0 -s 0x08000000 -D (FILENAME)
👉 APRS
sudo chown root:audio /dev/hidraw1
sudo chmod g+rw /dev/hidraw1
sudo adduser $USER audio
reboot/completely logout/in again
Note your sound device as show:
arecord -l
edit ~/direwolf.conf
Add or update the following lines:
ADEVICE plughw:x,y
ARATE 48000
MYCALL CALLSIGN
PTT CM108 /dev/hidraw1
Enjoy your radio!
Click the 👍 Like Button, 🤡 Leave a Comment, ❤️ Subscribe
👉 Support The Channel 👈
❤️ Patreon: / temporarilyoffline
📺 KZfaq Memberships: www.youtube.co...
💸 Tip Jar: paypal.me/temp...
🧰 Gear I Use: kit.co/Tempora...
🛒 Amazon Link: www.amazon.com...
📻 $15 off at Radioddity: radioddity.refr...
⚡ Meter I use in my videos: kaiweets.com/?...
👉 Fun Stuff 👈
👉 TOADs Discord: / discord
🕊️ Twitter: / kilomike9golf
😸 Github: github.com/Tem...
Where possible, all links are affiliate links, this youtube thing is an expensive endeavor and every little bit helps.