Thank goodness for fast forwarding.

"you've never seen THESE wire rope ideas" ......... Proceeds to show ONE idea. 🤦‍♂️

I am so glad I waited until the end of the video... That is a very clever gadget. It was not the thing I expected to see at the beginning of the video. Nice work!

I must say that I have seen that before as a child, and I have forgotten about it, thank you for the reminder👍

Good idea, must be watched at 10x speed

Why would you not show the two styles you show in the thumbnail?

I love it. It's perfect for the job. Thanks for sharing.

Very disappointed of end result. I want that 5 and a half minutes of my life back.

Simply awesome. So simple it made me chuckle.

I love the rooster in the background.

I use locking-grip pliers to hold the piece I’m sanding down with the angle grinder instead of just hands and gloves.

All good and well. But the sad reality is, there's a spring based version of this on the market already.

До конца видео думал, что это вместо цепочки на дверь ;)

I could find more uses for what was in the thumbnail

That system has been around decades, we call them queeny springs, used to close gates.

Именно то видео, в котором можно посмотреть только финальную и на остальное не тратить время.

Oh. Its a torsion spring. Get a spring hinge. $2

Bravo Thank you.

1 Bohren ( светлить) 2 Anfasen ( фазу) 3 Gewinde ( резбу нарезать)

Pretty slick

You should invest in a bench top drill press and a drill press vice !

Perfect. I was looking for something to close a door after my dog leaves it open. This is a great idea.

Мне больше нравятся устройства с грузами. Усилие не зависит от угла, на который дверь открыли.

, super klass kryto 👍👍

That will destroy the paint/finish on the door as well as slowly wear a groove into any wood it touches. 10/10 for creativity, -274917592/10 for practicality and a clickbait title.

I love hearing the rooster in the background

Не знает, что когда нарезаешь резьбу, нужно место нарезки обильно поливать машинным маслом.

Great!

Isn't there spring loaded hinges that do this?

Making a big job out of a trivial problem. A couple of plates screwed to the door would have clamped the cable just fine

These comedy parodies are pretty funny.

What good did that do

You might think about a drill press and some tooling?

Guessing he has running water by now….he’s had 2 years to figure that out.

It's nice work but I'm puzzled at what's it for?

Good video thank you 👏👏👏

Good 👍👍👍

And how strong is the wood? But good job.

Cool !!

I didn't get it. Why would you want that on a cupboard door or any door?

One idea? Ideas should indicate more than one. I'm not that impressed. This idea has been around for decades.

Pro tip. Put this on the hinge side of the door. Just sayin. 😖

I can get the same result much easier and probably not much more expensive... the depot.

Cool

I was thinking big deal I can lock a door with a chain Then bam it's a fricking hinge right on man

For $8 get spring type for the shops

What a waste of time, click bait.

Thats a lot of work just to shut a door.

Just a stupid click bait. But wait. The click bait work. We got a quarter million views.

5:33 of my life I’ll never get back…😑😑😑

Do I have to drill the holes at a slight angle??

great idea and looks fun to produce however... a little over-engineered for that purpose!😅 There looked to be absolutely no force on the clamps at all! I must be missing something

Cool 👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕😁🤞✌

I might not have but I've helped rebuild a fence before the guy couldn't see the drill holes he made in the concrete for to put those ankor things in that you can then screw a screw into or nut and bolt either one to bolt down the fence I liked those ankor things there useful and solid once you hammer them into to holes in the concrete

Cool idea. But that was only one wire rope idea.

That's That's lot more work than a spring hinge..

I like the tap u don't need oil must be new kind

Wow little oil tools would work longer

You could flip the preload to have it home the door open too.

Chiar bună treaba

That’s a lot of screwing around just because the theory works…….a self closing hinge would be more time conscious.

Pretty sure he ripped the threads out, when he was tapping those holes.

Is that the only one or have you got 2 more

Nice work, but wouldn’t it been better to weld the bottom of it? Well I guess if you didn’t have a welder. That would be the next best thing.

Dude does not value his fingers 😆 those cotton gloves wouldn't do anything against that disc

I can't believe I'm actually reading the comments on this video 🤦‍♂️

Those knit gloves get snagged by the grinder and it's a LOT worse injury than no gloves at all, at least you can pull away. Next time use leather gloves, not kit gloves!

Not sanctioned by the NTSB or the DOT

Сразу вторым номером?

Worker DIY, I can understand you wanting to share a clever project like this and post the video, but after reading all the random-ass comments and chatter below...I'm not sure it's worth it.

Es mucho jale no creen!!!

Sucks won't get my 5 minutes back either 😎

never grid with a cutting disc, they explode

🙌

Why not just buy a sliding door look Colton Home Depot so much Easter in more way than one. Who is gonna have the time or patience to carry a Alan wrench around with them . Wow some people’s kids

Personally I hate videos like this that require you to watch it to the end to see if it's even worth your time. Show me 5 seconds of the finished product. Then show me how to do it.

WHAT IS THIS?!? A VICE FOR ANTS?!

Well, that was just stupid.

What's it for???

Don’t wish to criticise but if you ground your centre punch back at 60-70 degrees then ground a point on it at 45-50 degrees it would be much easier to see what your doing ,plus use a pilot drill to start your holes instead of drilling straight through with the larger drill bit gives far better results eg much rounder holes ,easier to drill and you don’t get such a severe breakthrough and risk snapping the drill bit ,a variable speed drill would be better much more control otherwise ,ok for use in the outside shitter I guess but needs prettying up if your ever going to get it market

a lot of bother for damn little result.

Why are people calling a cable "wire rope" now?

Thumbs down... these videos with no overview; that just leave the 'viewers in the dark' till the end are for the birds.

I stopped watching when I saw the rusty tap

There goes 5 1/2 mins...

..……or you could save a day and just buy the fitting

I like the use but bro....get yourself a welder

Novell

mdr ! 1 ressort, 2 rondelles & 2 vis = finito

АХАХАХА. ЕЩЁ РАЗ АААХАХАХА.

$10.00 at Home Depot??

truly why ?????????????

Have you ever thought of just using a spring instead of this complicated bullshit?? Some people just have to make simple things complicated for absolutely no reason.

Wastefully iseless in my opinion.

I hope you're not a quaified tradesman. Id make my apprentice go back to school if they produce something as poor as that.

That's how to get someone hurt. That steel is not engineered for that, so you're just guessing what it can do.

Cool product, but.... So, is this a training video on everything you should NOT do to be safe, create quality and professional results? Literally every second of this video shows exactly how not to do it the right way.

its just 1 idea

You have got to be hitting me. They sell hinges with Springs inside of them for this very purpose and you didn't have to waste anybody's time or money or energy in making this worthless piece of junk click baiting sob. The end of the wire rope is stuck in the end of one of the set screws in the thumb nail and that's not even what you made.

What a waste