Thank you for the pain that you go through for us! So much appreciated! ❤

15V to the MAX, 12 or even 10dps next please. ;D Your hands surely cant wait.

Wow! I’ve been watching for years and I’ve never seen any steel do 2000 cuts of your rope. Nice job Spyderco. Thanks for wrecking your arm for us Peter 🔪🎸

AMAZING! My condolences to your arm. Thank you for doing these Pete! Congratulations are deserved to go to Shawn and the Spyderco team for getting these out to us! Love this!

Maxamet has been Dethroned! Good work Pete this is an astronomical result! BBB and spyderco really knocked it out of the park!

You could use the chopped up fiber to create knife handles, id love to watch a video of you working with Resin

I'm so proud of BBBs work coming to customers through Spyderco. He's worked so hard for enthusiasts. I've followed him and you for years. Great work both of you!

Bricky looks fab with a custom toupee.

Holy cow! That’s insane! Thanks for continuing to do your thing, Pete. Yes, it’s only one type of testing. But, it’s a consistent test type for comparing a huge number of steels against one another. What you do is extremely valuable and interesting to knife enthusiasts, and I always look forward to your next test video.

Wow you literally put blood sweat and tears into these videos. We appreciate you more then you know. Thanks Pete. Love the content.

This is Dan from Husk knives, based on your testing our new ad campaign will recommend customers just buy 100 knives to match that edge retention of that meh Spyderho.

Great test. Thanks for the video.

Great steel! Thanks for your effort, Pete!

Thanks Pete for showing us this steel and your torture test.

This is nuts. Thank you for your service.

This was great Pete thank you for all your efforts 😊

That’s an amazing effort, thanks Pete. It looks like an awesome steel.

Another great video. Thank you for all of your hard work.

Pretty cool!!! Unbelievable results indeed

Amazing. I’ve been carrying mine since I got it and love it.

Holy shit man. Not sure if I'm more impressed by the steel or your tenacity with testing. I wasn't sure what to expect performance-wise, but it sure as shit did not disappoint. Kudos on the undertaking

This makes me feel even better about my Shaman 15V :D

I watched this again today, it's just that good, please don't stop doing these !

The older I get the more my hands hurt doing knife stuff, especially sharpening. Thanks, Pete. Welcome to age

Grrr, thought I was done buying knives, after several I landed on my maxamet pm2 mainly because it cuts a lot of cardboard at work without sharpening. But NOW I want one of these and their a stupid stupid sprint run lol. Anyway, love your rope test

Thank you for your dedication. Now I need to buy another PM2….

This is an awesome time to be into knives! And what's more amazing is they're not too hard to sharpen! Thanks and well done!

Thank you for your sacrifice. Incredible steel! I hope to get my hands on the Mule in 15v next week

Thanks for all your hard work Pete!!! You’re by far my favourite knife-tuber…

Awesome steel! Pretty good stamina yourself too. Thanks.

When I was looking for a knife with good edge retention or rust resistance. I mostly go off your reviews. Thanks for this test. 👍🏼

I love these videos. I appreciate all your hard work!

Rust test time! That one's gonna hurt 😬

I think your testing is as good as I’ve seen, you replicate everyday knife use very well. Thanks for going to the trouble, it helped me with a tough decision.

Wow! Thanks Pete. I knew it would be good but had no idea it would beat Maxamet & Rex 121... !

Lmao!!! I so almost hit u with a comment saying ur barn door's opened, don't let the hog out. But I felt bad. I guess some of the others didn't have that same feeling. It's all fun tho hopefully no one was too brutal. Also, I couldn't wait for the follow-up to the factory edge test so I'm gonna go finish watching now✌️ and happy to see ur return!

I was under the impression 15v was analogous to something like Maxamet. But after seeing the edge on the macro after that much cutting it is clear to me that 15v is in a whole new class entirely

Way cool. You'll have to add that cutting test to your chart! Impressive, especially with the handle of the PM 2.

Ohhhh baby, I’ve been waiting for this!

As a long time knife and especially steel enthusiasts I appreciate the rope test. You know cutting cardboards finding all? But you know sometimes they go with the corrugated part and then sometimes they go through the corrugated part so I don't think it's as consistent. As your rope test appreciate your Cedric!

Thank you so much for those tests, much better than theory

Dude the title of the video is exactly should be.This 15V steel leve me speechless,absolutely amazing man!!!

Makes me happy I picked up a shaman in this steel.

Make 15v a production run plz！！！😂

I was, indeed, surprised. No clickbait here.

Zip ties and some cardboard are about all I cut that would challenge any edge. This test is amazing.

Now that's a real 'super' steel by anyone's definition. Thanks for showing. Sharp blades all.

💪🏻👏🏻❤ Nice to see the Huusk get a cameo too.

Pete gives the people what they want !!

😱😱😱😱now that thing can cut👍way 2 go Shawn and Spyderco 👏👌 Thanks for the vid Pete, that was marathon 😅

Thank you so much!

It is a very impressive result but not once, not even at the beginning, was I surprised! I am still chewing away at the factory edge! Rarely have I had a knife where I was more curious about what the factory edge will do vs how it sharpens!

You're the man. Ty for the pain and time.

that drop of the jnife into his lap though... 😂

THANKS PETE FOR ALL YOUR WORK, GOOD JOB!! BRICKY COULD LEND A HAND?

Damn! That's pretty incredible!

UNLEASH THIS TO THE MAXXXXXX!!!!!!!! Bring it back baby!!!!!

I feel bad cause Pete’s never gonna want to use this steel because of the horrid bone cracking pain he has endured for the sake of this channel. Thank you for all the cut tests good sir!

As a knifemaker, I have lots of 2x72 ceramic belts laying around. Recently I attached an 80 grit strip to a glass blank with 2 sided tape, and used that to establish a bevel on a new knife. Granted it was s35vn, but it did a great job. I walked the grit ups to 400, and was really happy.

I’m impressed. I didn’t realize how real the hype actually was

Were will it end. That’s absolutely incredible.

When you meet new people and they're like "dang your right arm is huge you must spend alot of time alone".......you say "nah mate I test cut knives" first dude "riiiight" 🤣

I did notice the fly thing, thought you were easing the other tattoo. Thank you and your arm for doing this cut test. The testers that I’m aware of Tom, Gerald, Michael christy, and super steve seem to have taken breaks. Gabe’s testing is different in nature, and Stassa’s is more qualitative. If I missed someone please feel free to respond.

Wow, thank you for what u do! Crazy

It made me want one now.

Impressive. Most impressive.

Awesome test, could you do another short video of how it strops back afyer all that cutting?

wow great job brother

TY Mr Ropeman

I sincerely hope you do not end up with serious carpal tunnel, or any other physical issues from your knife activities. Good Job!

Honestly removing (or just moving) the clip on a test like this would probably help with the hand fatigue. One of the main reasons I started doing tip up carry is it puts the clip in a natural follow of the hand and not right where I'm trying to grip tightly.

Thanks!

Yay Bricky 🎉🎉🎉🎉

Knife nerds version of a mic-drop there at the end. Superb!

You always struck me as a habitual willie-flasher!!!

Farken 'ell, Pete! That's INSANE.

2000 is a lot no matter how you slice it. I'll see myself out.

Great video. Hope you can test the Bark River Fin & Bone sometime

Awesome video.

Dam that was Amazing 😮.

Thank u ❤

Too bad 15V so hard to get. Great test and video Pete.

I been dying to see how your test comes out.

Great video... I filmed 850 feet of cardboard as a cut test... and QUIT.. It felt like that tootsie roll commercial. How many licks does it take to get to the center of a tootsie roll lolly pop? I love the steel, easy to sharpen \ de-burr, holds an edge for a ridiculous time, takes a hair popping edge. I hope 15v becomes a standard Spyderco offering and not a one off. Thanks for the video! : )

Good, Thx

Good Edge Cut Awesome

I have both Maxamet and 15v in Para 2's. The 15v chips far less than the Maxamet. The 15v can be run at a far shallower angle than the Maxamet also. I have to run Max. at 18 degrees or more and the 15v can be run at 15 although 17 is the best for all around performance. The 15v sharpens much better also. Spyderco and BBB knocked it out of the park with their collaboration, and this steel/knife will be a 'grail' knife for years to come if Spyderco doesn't start mass producing 15v blades. (I hope they do!) Don't worry about carpal tunnel Pete, the fix is a 15 minute procedure after you go through the long and tedious setup that all surgery's take. I had both hands done 20 years ago and no problems since.

Lol I got a Huusk ad watching this and I chuckled at the irony

Solid intro

Other worldly!

thanks

Nice jacket.

Fantastico! I guess its 15v vs maxamet next, Gabe edge of course

I have just received my mule team in 15v, now i just need to order a ball of twine...

Great workout. A steel hard to beat for sure. I think you could do even better with your sharpening if you used water with a drop of dish soap in it on your stones. Sure makes a huge difference on Venev diamond.

Hey Cedric, thanks for the video, now we need to know about corrosion resistance, can you do a test ?

omg seeing advert for that 20 cut knife in the middle of your video toooooo funny Coolina or something

Very nice

OK, you've convinced me,,, 15v is OK steel,, 😍😍😍

Now the hard part: actually getting one of these