Рет қаралды 19,691
Your 3D Printer must have a problem with the temperature sensor
I'm going to talk about PLA but it can be any other filament, its average printing temperature is between 190 to 210C°, when you go to print the quality is very bad, it looks like it's too hot and you need to lower the temperature close to 180C° or the opposite , at normal temperature the filament does not come out, it keeps making the TEC TEC noise in the extruder and filament only comes out if the temperature is above 220C°, know that there is a high chance that you have a problem with the temperature sensor of the hotend. Follow along in this video!
=================================
I ask you to subscribe to our channel, share, make comments and suggestions for new videos.
=================================
Share: • Impressora 3D com prob...
=================================
Follow us on our social networks:
Instagram: / 3dlegacy
Instagram: / 3dlegacyprojetos
Facebook: / 3dlegacy.br
LinkEdin: / 3d-legacy-projetos
Whatsapp: (31) 99458-9171
About the channel: I will address topics about printers, types of printers, hardware and software configuration, installation of programs, parameters, slicers, improvements, tips, tutorials, optimization, cost-effectiveness, maintenance, comparisons, automation, curiosities, printer characteristics (Delta, Hbot, Cartesian, CoreXY, Polar, Scara, Tripteron and Multi-axis), among many other themes, all for free.
#impressao3d #impressora3D #tipsdeimprimido #improvementaimpressora3D #tutorialimpressora3D #filamento #PLA #ABS #TPU #creality #ender #impressor maintenance #printer defect #ultimaker