Your Denoising is WRONG

Рет қаралды 37,529

Күн бұрын

Instagram:
/ blender_sponge
Artstation:
www.artstation.com/blender_sp...
Music Used:
SURF- Take Care
Flitz&Suppe - Bs Mellow Flip (feat. B-Side).
Have a great day!
Intro: 0:00
Thank you: 0:23
Procedure 1:04
No Denoise: 1:35
NLM Denoise 4:25
OID Denoise: 6:26
Denoising Node 9:28
For those who feel tired and lost 14:12

Пікірлер: 100

@arcticbarbarian 2 жыл бұрын

Great video! You explain things very well. I'm excited to watch your other videos.

@nevell6069 Жыл бұрын

You made a beautiful ending, very motivating. Thanks a lot!

@huzair83 2 жыл бұрын

thank you very much for this video, I'm on 1060 too. I really wanted someone to tell me to go even faster on this GPU with ultra less noise. Thank you again & I'm also 20 right now learning & doing stuff in the blender.

@BlenderDojo 2 жыл бұрын

I'm glad to hear! Hopefully blender keeps optimizing itself so we can get even faster render times!

@huzair83 2 жыл бұрын

@@BlenderDojo I hope so

@farrelmf6912 2 жыл бұрын

WHOAAAAAAAAHH Thank you so much man, this video deserves more likes.

@Venkat-13 4 ай бұрын

This video is so well put, thanks!

@plcreator483 11 ай бұрын

Thanks for letting me know about this I took a screenshot of the composting scene so I can remember.

@yamsgarden 2 жыл бұрын

Omg-- u just saved my ratchet ass render, thank you so much for the info and tuto! Can't wait to see what else you come up with :3

@gaston. 2 жыл бұрын

this is a little confusing since the Render panel, under the Denoise switch has the Denoiser, OpenImage.. with the Albeido and Normal passes.. so we don't need to add this node in the compositing panel? ( I just use the compositing panel to add a Mist pass)

@darkdroide 2 жыл бұрын

really good final talk

@BruceCarbonLakeriver Жыл бұрын

I'm still not sure which one is OIDIN wnd which one is NLM? I used to use the denoising node in the compositor but at animations everything gets messed up. Then I used the denoiser I've found on the right side on the render settings and setting it to accurate and albedo + normals. This works better, I suspect it is OIDIN :)

@emilalibekov 2 жыл бұрын

I'm subscribing, my dude! Take care!

@basspig 2 жыл бұрын

Why do we need this if we have optix denoting on rtx gpus?

@akongas Жыл бұрын

Thank you so much! Appreciate that info.

@KeishaDeniece 2 жыл бұрын

Thankyou for this video!!! Very helpful!!!

@JT11111 2 жыл бұрын

So how do one do this for videos, im not gonna do this fopr every single frame of the animation

@aravindawijenatha6656 Жыл бұрын

Hi there brother Nice trick, I have a question, when i always render out animation with cycle, it doing wired flickering on the evey material in the video, Have you got a idea how to fix it My spec is i5, 4gb 1650 GTX ,

@Honey-qp6ti Жыл бұрын

Hello. You know, what my problem is. My laptop has a 1660 ti, but my animation renders are quite complex with a lot of refraction etc and a sandy floor with stones. So I have to render it on a render farm, which does not allow opti x. So if I denoise it later, the sand texture disappears. If I render it myself with optix, it looks great, but due to a windows 10 update, I take 3 times longer to render on my laptop, then myself through the farm ^^ Is there a way to denoise afterwords and keep the sand texture?

@Jasonwalkertube 2 ай бұрын

I don't even have a graphics card in my Laptop. I've been using Google Colap to render. Usually get a couple hours a day of access to a T4. Don't know if this is a good idea but it's atleast 10 X faster for me. Never used a render farm.

@alifadhil5377 2 жыл бұрын

I can not find this option in blender 3.0.0!

@HaloWolf102 2 жыл бұрын

Uhh, my Render Layer has 3 options: 'Image' 'Alpha' 'Depth'. There are no extra options to put into anything...

@BlenderDojo 2 жыл бұрын

hi! make sure to turn on "denoising data" under render layers. then your extra options should pop up

@user-kq4ry4jj1x Жыл бұрын

I put diffuse color in albedo. In many cases it shows better results.

@helloavvi Жыл бұрын

bro gave me a life tip in the end of the blender tutorial 💀 i subscrobed

@FinnbarrGoesFast Жыл бұрын

So after we add the denoising node and hook it up to the correct inputs, we can uncheck the box for OpenImageDenoise?

@BlenderDojo Жыл бұрын

yes, you're denoising your image twice if you don't uncheck

@jkartz92 2 жыл бұрын

I suppose you forgot to plugin the denoiser node to the footage you shot ;)

@kooale3252 2 жыл бұрын

actually this is also wrong since superimagedenoise exists which basically denoises each layer on its own and combines them back. Way better than the actual denoise node and preserves tons of texture details

@SeanyKrabs 2 жыл бұрын

I couldn’t get sid to work on Blender 3.0 alpha

@kooale3252 2 жыл бұрын

@@SeanyKrabs a lot of addons dont work on blender 3.0 alpha since its so unstable

@bubblegumstudios1179 2 жыл бұрын

@@SeanyKrabs I got it to work on the 3.1 Alpha.

@ramanrafiq7888 Жыл бұрын

@@bubblegumstudios1179 could u tell me where u download it

@The_YellowGuy_ 8 ай бұрын

It also doesn’t work on blender 4.0

@TerenceKearns 2 жыл бұрын

i wish we had access to dlss in blender.

@AlisonReidMe Ай бұрын

Hi, I hope you read comments, I have a quick question. In the compositor, you connect the Render Result "Image" dot to the Denoiser "Image" dot. Shouldn't you be connecting from the "Noisy Image" dot instead?

@telisto 2 жыл бұрын

What about denoising animations?

@andrewmccarty 2 жыл бұрын

Should you not use the "Noisy Image" output for the denoise node? I noticed you just used the regular "Image" output.

@BlenderDojo 2 жыл бұрын

Hi! I had a similar question in another comment, here's what I found "I found this link with some info that states for more general purposes that the "image" input is actually preferred blender.stackexchange.com/questions/173760/how-to-properly-connect-the-denoise-node-in-compositor "

@Jasonwalkertube 2 ай бұрын

. Thank you so much. Was wondering which one I should use.

@gavinmetzler858 2 жыл бұрын

No, YOU'RE doing it wrong!!! Optix temporal denoise since Blender 3.1 is amazing for animations, more people should be talking about it! No one seems to have tested it because there is no documentation. I got this far: Set render output to EXR_Multilayer; turn on vector and denoise_data layers and render an animation. Then open up python console and enter: bpy.ops.cycles.denoise_animation() It goes through each saved image file for each frame (so its best to test with just a few frames), and overwrites the layer "View Layer.Combined.RGB" with a denoised version. (I think you have to have an RTX card, Optix as the Cycles Renderer in System settings, and turn denoise on in render tab, select Optix, then turn off again - I don't know if all this is necessary, but when I initially tried with Cuda selected in system settings, and OpenImageDenoise in render tab, bpy.ops.cycles.denoise_animation() worked, but the results were poor. So I did everything I could to ensure Optix was being used, not any other denoiser, and got much better results. Open the EXR image sequence in Davinci Resolve, go to Fusion page, and on the MediaIn node, choose the layer RenderLayer.Combined.

@SimFiftyFifty Жыл бұрын

No YOU

@BlenderDojo Жыл бұрын

tldr

@Lakus231 Жыл бұрын

@@BlenderDojo BRUH

@letslearn8896 4 ай бұрын

what is your render resolution because when i zoom my render like you are zooming it breaks my resolution quality so what to do for that is there any hack

@abhinilbose24 2 жыл бұрын

Great video mate

@LiminalLo-fi 7 ай бұрын

If you are doing animation this method probably will not work for you and leave you crying after months of trying to figure out why you cant get stable light, shadows, and textures from this basic method. The answer: temporal denoising and median denoising. Good luck!

@hugoantunesartwithblender 2 жыл бұрын

How do i denoise multiple images in the same compositor (using sample offset of blender 3.1)?

@BlenderDojo 2 жыл бұрын

Great question! I wouldn't know as I don't even know what sample offset is. I'll play around with it tomorrow and hopefully come back with an answer, if not a video :)

@hugoantunesartwithblender 2 жыл бұрын

@@BlenderDojo kzfaq.info/get/bejne/p7-Kfsh8mc-upGg.html this minute. Is a new feature of blender 3.1 that basicly lets you make a personal renderfarm witouth add ons. I made a not setup to add the results togheter, dont know if is optimal. BUt this morning i got the idea of comparing 250 +250 samples result with the 500 samples result using the difference node (any difference will show a color)

@mystymysty3667 2 жыл бұрын

Very good tutorial, I hope you get more follows!

@troyl44 10 ай бұрын

why do people use the denoising node at all? Why dont you just check the box under your samples? Am i missing something?

@Raitan2008 Жыл бұрын

Good to know I was doing it right...so how about a video explaining multi layer exr

@bigdaddyproduction7266 2 жыл бұрын

Hey there, how does it works for an animated render?

@BlenderDojo 2 жыл бұрын

hi! it works the exact same for an animated render, as blender passes the image through the compositor each frame

@cgastonished 2 ай бұрын

you are right bro 🙂

@m_tth_w9647 Жыл бұрын

Thank god, I can now avoid demonising my scenes wrong

@lucianosq 2 жыл бұрын

14:12 the final was the best. thanks

@mtraceur14 2 жыл бұрын

Good one! Cheers

@random3rsifO_O Жыл бұрын

So now I ran into this issue, when I render the image, my image looks like tin foil and doesn't even look right anymore, would post a link here but don't wanna get taken down...

@BlenderDojo Жыл бұрын

Hey, whenever my images look like tin foil even if I'm denoising it's probably because I am using another denoiser on top of the compositor denoiser or I don't have my other inputs plugged in to my denoiser. Make sure the denoise box is unchecked in the "Render Properties" tab and in the view layer properties be sure to enable "denoising data" then in the compositor. Then enable use nodes in compositing and add in a denoising node. Then hook up image normal and albedo to their respective inputs on the denoising node.

@random3rsifO_O Жыл бұрын

@@BlenderDojo Yep I did what you did, waited for it to sample to 400 and now I have an animation rendering that's gonna take 5 hours, its a 10 second animation ;-;

@BlenderDojo Жыл бұрын

@@random3rsifO_O render overnight if you can!! that's my go to

@random3rsifO_O Жыл бұрын

@@BlenderDojo it worked thanks man!

@random3rsifO_O Жыл бұрын

I did and it was worth it! Will definitely use your channel for anything else in the future! Also subscribed!

@Juska_Meta 2 жыл бұрын

@ramalshebl60 6 ай бұрын

can i use denoise node WITH openimagedenoiser?

@playbyan1453 3 ай бұрын

denoise option in rendering already handles stuff like on the video, if you want controls make sure denoise option is disabled and use compositor and follow the steps explained on the video.

@ramalshebl60 3 ай бұрын

@@playbyan1453 ok thanks

@kadirkilic5866 2 жыл бұрын

thx bro

@darylnepomuceno3542 Жыл бұрын

I'm at 3060, I don't know why my scene still looks trash with this noise..

@depthsofdejenol8026 Жыл бұрын

good content fam

@FinnbarrGoesFast Жыл бұрын

neat

@hugoantunesartwithblender 2 жыл бұрын

💯

@cgastonished 2 ай бұрын

i have gtx 1070

@xcept6976 10 ай бұрын

love u

@rennightmare Жыл бұрын

Hello! So i ve some question left, is it like its always better to set up denoise in the compositor rather than turning it on in render properties panel?

@BlenderDojo Жыл бұрын

in my experience, yes. I've heard others say it's better to use other methods, but the composite denoise node works the best in the cases I've seen and is the easiest to set up for me

@tonightsstorytelling1034 Жыл бұрын

I want to get rid of the noise before the render, to make a movie, how do I do that?

@valentincastelo6798 Жыл бұрын

OK YOU YOU WERE WRONG . I AM AREADY USING THAT NODE PROPERLY .

@montikorbelle 2 жыл бұрын

skip to 10:22 for the tutorial

@BlenderDojo 2 жыл бұрын

0:00 watch the whole video for a detailed explanation of all current denoising types and how each deal with noise to further increase your Blender knowledge

@MrMargaretScratcher 2 жыл бұрын

I'm denoising my scenes wrong? Well your mic is clipping so HAH!

@AshT8524 Жыл бұрын

I heard u say 17k subs in the beginning of the video and kept thinking what the heck happened in a year that this dude lost almost 15 k subs lol

@BlenderDojo Жыл бұрын

I said 17M on accident lolll it's actually 17 hundred

@Dina_tankar_mina_ord 2 жыл бұрын

I have a feeling that you make this wrong on purpose to get more traffic. But if not go to View layer properties and turn on denoising data That will add options on the compositing node tree that will make you activate the denoising normal, albedo and noisy image.

@BlenderDojo 2 жыл бұрын

10:27 Shown right here! With the release of blender 3.0 the "noisy image" socket is gone too and the denoise node only has "image" "normal" and "albedo" for input sockets. I'm not intentionally doing anything wrong to get more traffic but if you have a deeper understanding that I may have missed feel free to help me out!

@psychobillycadillac 7 ай бұрын

don't know what it is about you kid but, i subscribed, hope it helps, doing good work, maybe my measly 104 subscribers will see a karmic jump from this.

@BlenderDojo 6 ай бұрын

Thank you 🙏