Z1 Motorsports 75MM Throttle Body Upgrade Nissan 350Z / Infiniti G35 (Hitachi)

Z1 Motorsports 75MM Throttle Body Upgrade Nissan 350Z / Infiniti G35 (Hitachi) | AnthonyJ350

Рет қаралды 13,396

Жыл бұрын

We show you the basics to upgrading you 70MM throttle body to a 75MM version from Z1 Motorsports.
#Throttlebody #Z1Motorsports #350Z #Nissan
Subscribe for more automotive tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Racing Hearts'" - Martin Landh
Outro - "I just can't change my Emotions" - Basixx
- "It's Gonna Be Alright" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Z1 Motorsports 75MM Throttle Body Upgrade Nissan 350Z / Infiniti G35 (Hitachi) | AnthonyJ350
• Z1 Motorsports 75MM Th...
ANTHONYJ350
/ anthonyj350

Пікірлер: 89

@ICT.350Z Жыл бұрын

It does give a power advantage, but perhaps also a change in the curve. Takes a good few hours, even a couple days for the ECU to adjust and compensate.

@AnthonyJ350 Жыл бұрын

I'm interested to see if the midrange fattens up a bit. Torque still doesn't come on till about 2,800 rpm

@DadeBoi_Czer Жыл бұрын

Had my 75mm for bout a year and it’s awesome 🎉 totally complements my cold air intake system from Z1 my bigger Plenum from kinetics and man 😊love it

@AnthonyJ350 Жыл бұрын

Thanks for sharing your experience!

@benny6712 Жыл бұрын

Yup, this setup makes a bigger difference with the 3” intake pipe from the filter back

@cdss2791 10 ай бұрын

I’ve had mine about a year now and it’s one of those mods that you instantly feel the difference! 🔥

@AnthonyJ350 10 ай бұрын

Totally agree!

@kmk1195 9 ай бұрын

do you need a tune to run it?

@cdss2791 9 ай бұрын

@@kmk1195 No not at all. Mine threw a code once but haven’t had a problem with it in over a year.

@AnthonyJ350 9 ай бұрын

@@kmk1195 Just an ECU reset kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.htmlsi=PIFbhXwc8Box5pw6 If you have other mods you should get the car dyno tuned with UPREV.

@robertmedina6875 Жыл бұрын

Thanks for sharing

@AnthonyJ350 Жыл бұрын

You're welcome, and thanks for watching!

@jewllake Жыл бұрын

I put a simple ported and polished kaytech TB on my 2018 6.2 Sierra. It eliminated a slight hiccup I had under light throttle acceleration.

@AnthonyJ350 Жыл бұрын

That's interesting. Hope you're doing well!

@stealthg35infiniti94 Жыл бұрын

I agree, if you want the Maximum Benefit from a 75mm Throttle Body, the throat of the upper plenum must be enlarged. Otherwise you will get the same effect as 70mm at WOT. The exception would be Forced Induction.

@AnthonyJ350 Жыл бұрын

It offsets the volume the butterfly valve occupies in theory.

@stealthg35infiniti94 Жыл бұрын

@@AnthonyJ350 I agree.

@mikewaite3746 10 ай бұрын

It seems like you really do know your stuff about cars. Love some of your bantering back and forth with Anthony. I had a little bit of bantering back and forth with the engine wire harness cover.

@stealthg35infiniti94 10 ай бұрын

@@mikewaite3746 I also volunteer teach Auto Tech at my local High School along with an instructor who worked at a Dealership for over 20 years. Between our experiences, we can disspell most myths/exaggerations/false claims. Don't believe everything you hear. Go to independent experts that have nothing to gain.

@neterosrose Жыл бұрын

Love your vids brother, quick question tho. Can I run a plenum spacer and the V+ Kinetix Plenum simultaneously without modifying anything? The black one that you did a heat comparison video for with that G35 a while back.

@AnthonyJ350 Жыл бұрын

I think you would run into clearance issues. I would chose one or the other. In theory it might pick up a lot of top end but might lose in the bottom and down low. I'm just speculating, I've never seen the combo done.

@larrycampbell6133 6 ай бұрын

I had that same exact question and haven’t found anyone that’s tried them together. The hood clearance was my primary concern. And if I had to choose one or the other, AND never planning on going turbo - I’d probably just get the spacer. But that’s just kinda going off of what I’ve seen other people do

@ninobulfa Жыл бұрын

Do I need tune if I install one? Or its okay for ecu to relearn and continue to use it daily? I am in vegas and I dont have access to a tuner for z.

@AnthonyJ350 Жыл бұрын

You should be able just to do the ECU reset and take it for a long drive.

@TheGamerJalen Жыл бұрын

Can you do the high coils packs next from z1 motor sports.

@AnthonyJ350 Жыл бұрын

That's something we can definitely look into.

@user-po1zr9ii6h 8 ай бұрын

Does anyone know if this mod will still be able to pass smog check as everything else is completely stock and cat are still on.

@AnthonyJ350 8 ай бұрын

I see no issues, provided there's no check engine light after. Make sure to do the relearn procedure and drive the vehicle. kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.htmlsi=ZCsHif9uof6FIyQD

@tmusson151186 Жыл бұрын

Will you be going back to the dyno to adjust the tune?

@AnthonyJ350 Жыл бұрын

Yes definitely, want to make sure everything is correct.

@vjf3337 9 ай бұрын

Do you have the throttle body relearn procedure my car been acting up time to time and I believe I need to do the relearn more times …… could you plz give me steps if you know?

@AnthonyJ350 9 ай бұрын

Try this kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.htmlsi=3Zesort7dBHkYoQz

@leakyjeep5.9 5 ай бұрын

I wonder if this would benefit a 6spd Maxima with NWP spacers and a vias delete.

@AnthonyJ350 5 ай бұрын

If you have other intake and exhaust mods it will.

@andreslatorre1466 Жыл бұрын

Hi , Where do you get your air intake pipe?

@AnthonyJ350 Жыл бұрын

iRace AutoSports

@JohnSmith-wb6kq Жыл бұрын

Hi Anthony, seeing as you are the go too guy for the Nissan 350z cars, could you help me out please, I need to get a new/used ECU for my 2001 350z and I'm wondering if they are like BMW, where you have to have the VIN number changed to your original vin in the ECU before it will work, do you know if the 350z ECU stores the vin number? Cheers

@AnthonyJ350 Жыл бұрын

2001 350Z? Check the VIN to verify the year. Also see if Z1 Motorsports has any ECUs available.

@JohnSmith-wb6kq Жыл бұрын

@@AnthonyJ350 Thanks for the reply, Sorry mate it's a 2002 (fat fingers) model, I have a second hand ecu here for the car, (down in New Zealand but not sure if you have to write the original vin into ecu, I had to have it done to a BMW a few years ago, does Nissan store the vin number in the ecu?

@AnthonyJ350 Жыл бұрын

@@JohnSmith-wb6kq That I'm not sure, I've only had my car dyno tuned. I haven't done an ECU swap on this chassis.

@dylan2g Жыл бұрын

nicee aree you going to get a re tune?

@AnthonyJ350 Жыл бұрын

Yup I plan to, because of all the changes we've made.

@maqsoodnsx Жыл бұрын

We need to do an idle air re-learn

@AnthonyJ350 Жыл бұрын

Not a bad idea to do an ECU reset and take for a long drive

@Vonie2Geeked Жыл бұрын

Would this work with the the rev9 turbo kit ?

@AnthonyJ350 Жыл бұрын

I would contact the manufacturer on that one.

@user-dd8hj3ls9d 8 ай бұрын

By any chance is your tube sitting on a coil pack as in the hose under got any clearance issue since for some reason mine just lays on a coil…

@AnthonyJ350 8 ай бұрын

I think you figured out your issue correct?

@user-dd8hj3ls9d 8 ай бұрын

@@AnthonyJ350 yeah after watching your video I did greatly appreciated no more issue I just didn’t turn it enough because the tube would pop off so after leaving it overnight the tube expanded so easy to fix thank you

@littlez3325 Жыл бұрын

Is this basically the same for HR?

@AnthonyJ350 Жыл бұрын

HR has 2 throttle bodies and uses valve timing to do everything.

@freeyourmind8849 Жыл бұрын

Nice video. I wouldn't recommend larger TB unless your using forced induction. Never by a TB spacer is snake oil. The heads and lower intake manifold flow well. Just the front cylinders stare for air under WOT so porting or use a spacer helps.

@AnthonyJ350 Жыл бұрын

Even if you're trying to compensate for the volume the butterfly valve takes up and trying to squeeze everything you can out of the engine from a bolt on perspective?

@Michael-ty2uo 9 ай бұрын

Most people get bolt ones like this to support their upcoming forces induction kit. Or they know it’s not going to provide an insane amount of horsepower they just want a small bump

@autoperformance503 Жыл бұрын

I have a 350z while driving car stalls no engine light ?

@AnthonyJ350 9 ай бұрын

Use the clutch better?

@sportsmansparadice42 3 ай бұрын

Did you loose any low speed torque?

@AnthonyJ350 3 ай бұрын

Didn't notice and the dyno graph showed peak torque coming on the same way at the same RPM. If anything the low end felt a little better.

@Mpl_Jon 2 ай бұрын

I have a g37 with 2 do I need to upgrade both

@josephpark18254 Ай бұрын

Yes

@AnthonyJ350 Ай бұрын

Yes if you want a bigger throttle body.

@K24Reggie 9 ай бұрын

Where did you get the throttle body? And do i need a adapter to install the throttle body into my stock manifold ?

@AnthonyJ350 9 ай бұрын

Got the whole kit from Z1 Motorsports

@K24Reggie 9 ай бұрын

@@AnthonyJ350 thanks I found it yesterday! Crazy that a tune is not required to install it

@AnthonyJ350 9 ай бұрын

@@K24Reggie ECU reset is recommended and take it for a long drive after.

@K24Reggie 9 ай бұрын

@@AnthonyJ350 yes thanks for the heads up ! How long of a drive you think ? I have a 04 g35 6mt. With test pipes ,exhaust and manifold spacer and i made 251whp and i was on 89 and had a misfire because one of my o2 sensors was bad. I think if i tune it I should definitely make 270 280 hopefully 😭

@AnthonyJ350 9 ай бұрын

@@K24Reggie Take it for a 45 min to 1 hour drive on the highway. Ya new NTK O2 sensors and a clean air filter will help a lot next time you retune the car.

@user-po1zr9ii6h 8 ай бұрын

Is this better than a ported throttle body?

@AnthonyJ350 8 ай бұрын

Probably similar. What's the diameter of a ported throttle body?

@user-po1zr9ii6h 8 ай бұрын

@@AnthonyJ350 I got the shop to check it for me an its 73mm ported out.

@AnthonyJ350 8 ай бұрын

@@user-po1zr9ii6h Pretty close

@commasNculture 8 ай бұрын

To confirm these are NA motors right

@AnthonyJ350 8 ай бұрын

You could put this part on a forced induction motor.

@user-vy5cy4hc7r Жыл бұрын

Does this make idle stable?

@AnthonyJ350 Жыл бұрын

My car idles like factory.

@user-vy5cy4hc7r Жыл бұрын

@@AnthonyJ350 So like idle is 650?

@AnthonyJ350 Жыл бұрын

@@user-vy5cy4hc7r 600-800

@AnthonyJ350 Жыл бұрын

@@user-vy5cy4hc7r I'd check for a vacuum leak and replace your PCV valve as well.

@user-vy5cy4hc7r Жыл бұрын

@@AnthonyJ350 I already check hose nothing leaking using the spray method with soapy water and brake cleaner as PCV valve is new replaced and only drove car for 30 miles since.