No video
Z19DTH Crankshaft Damper Pulley Noise - Astra H
Рет қаралды 21,386
Күн бұрын#astrah #crankshaftpulley #damplerpulley
From couple of months my Astra became quite noise on indle and when the engine is pressed hard from low revs. After some investigation i found the problem to be the crankshaft damper pulley. Some people call it harmonic ballencer.
Even better example video: • stilo jtd crankshaft ...
@maclow5211 3 жыл бұрын
Not yet heard that sound on mine but thanks for the sharing 👍
@ivanparakosov1202 3 ай бұрын
350’000 km still original alive!
@pauljhlmcnab5468 3 жыл бұрын
I'll be doing mine tomorrow , its completely separated 😬. Did you need two people to release the tention whilst you put the new pulley on ? Great video . Thank you
@icku 3 жыл бұрын
Nope, you just need a spanner and a lever attached to it and the tentioner pulley is ease to release.
@pauljhlmcnab5468 3 жыл бұрын
@@icku thank you , I'm starting mine now 👍
@user-bh7bk2ok7d Жыл бұрын
I Have weird knocking sound around 1800 to 2200 RPM, so I hope this damper pulley may be the trouble maker. (my car is astra J 1.7CDTI A17DTR)
@kevinkelleher8805 Жыл бұрын
Same on my explorer
@MegaAmas123 Жыл бұрын
Change it for Pulley with number 55564573, it doesnt fail. I've did that on my z19dth, no ratling noise anymore!
@icku Жыл бұрын
Happy to hear it.
@michaelwilson4737 2 жыл бұрын
Can the damper pulley completely fail, I think I have the same issue on an A20DTR engine in my Saab ttid
@icku 2 жыл бұрын
Yes it can. If its the old model like the one I'm replacing in the video it could fell out in parts
@user-po9sg3ks4p 2 жыл бұрын
What is a damper pulley ?
@minisla 2 жыл бұрын
Does it tend to happen on cold starts...
@icku 2 жыл бұрын
Its not weather relater.
@user-po9sg3ks4p 2 жыл бұрын
Is the pulley hard to change
@icku 2 жыл бұрын
Not that much. But you need tools.
Alfa Romeo? No Problem!
Рет қаралды 14 М.
Fix and Drive
Рет қаралды 379 М.
Fix and Drive
Рет қаралды 125 М.
Auto Mechanic in saudi arabia.
Рет қаралды 59
Fix and Drive
Рет қаралды 30 М.