Do you still own the Z? That engine bay was so clean and nice.
@tomburns46693 жыл бұрын
So much room for activities!!
@dlgump5 жыл бұрын
Thank you so much for posting this!!!
@WickedZ315 жыл бұрын
Thanks for the comments!
@ezzymotorsports54515 жыл бұрын
Who needs emissions
@wendigoisland72953 жыл бұрын
Californians
@tusks9075 жыл бұрын
looks so clean kudos
@WickedZ315 жыл бұрын
appreciate that
@officialforwardmovement5 жыл бұрын
Did you have to do anything with the ECU after doing all these deletes? Also the idle has to get manually set via TPS and TB correct ? How did the car run after this? It’s my first time doing any deletes and just want to get more information on how it’s done before I more forward. Thanks in advance!
@WickedZ315 жыл бұрын
No ecu changes, yes tps and idle screw for adjustment. Find me on fb in the group Z31 Mods & Builds
@jovansolomon98716 жыл бұрын
Thanks alot. you've been a great help.
@jovansolomon98716 жыл бұрын
Where did you get your delete plates. Your IAC plate and egr plate
@WickedZ316 жыл бұрын
Jovan Solomon @xenonzcar.com Joseph Melnick
@WickedZ315 жыл бұрын
IM sponsored by XenonXcar.com. Joseph Milneck sent them to me for free. Join the Z31 Mods & Builds group on Facebook if your not already in there. He is a member and you just gotta contact him. He sells them cheap.
@WickedZ314 жыл бұрын
You can honestly cut them out of license plates and double it up, just use an RTV gasket.
@carter20853 жыл бұрын
Hey man impressive delete! I was wondering, what was the valve you deleted to the upper right of the egr?
@WickedZ313 жыл бұрын
Belive it was the cold start idle valve
@FIX_N_CHIT4 жыл бұрын
I’m trying to delete a bunch of things in my 300zx base to prep for turbo and was wondering the how to
@WickedZ314 жыл бұрын
Hope this helps at least a little..
@franklynpertuz7669 Жыл бұрын
Yeah looks great I have an 85300 also I want to know how if I delete that stuff will my computer run the same on the car that's where my curiosity is I did delete the EGR valve nice work
@JAKIMB0 Жыл бұрын
What's the thread for the plug on the exhaust manifold?
@heykid5422 жыл бұрын
What does a icv delete do? I just csnt find any information on why people do it? I know that it’s not really needed but doesn’t it make it harder to turn over in the cold? Is deleting it simply because it will look nicer? Like what’s the real purpose of anyone can pls educate me
@WickedZ31 Жыл бұрын
Deleting these parts is to clean up the engine bay and to remove the vacuum lines completely to avoid vacuum leaks and other issues caused by the vacuum system.
@dudemester5 жыл бұрын
Where did you buy the small caps? I'm really interested in doing this to my car but I dont really know where to start. I was thinking of starting with the egr but have 0 clue on how to start. Or what parts I'll need other than the steel plates and the exhaust plug.
@WickedZ315 жыл бұрын
autozone and ace hardware are your best friend
@WickedZ315 жыл бұрын
Autozone has the caps, xenonzcar has the plate
@tylerwhite37874 жыл бұрын
YES!!! THANK YOU
@lil_grogu89abuelo595 жыл бұрын
Did you just pull off the ac compressor and thats it? Did any liquids come out? I have a 84 NA and the ac compressor is hooked to a tiny pulley and then goes down to the main pulley Will i still need the belt and the small pulley after?
@WickedZ315 жыл бұрын
The belt drives the compressor, i ditched that, the condenser and anything else connect to the ac compressor as well as the 10 lb bracket.. lol
@WickedZ315 жыл бұрын
You just need a smaller belt, I'm just running the 2 belts.
@k.o.6685 жыл бұрын
Your coolant hose on the passengers side of the UPPER plenum-- I see its capped off but are the other lines the rear gallery connects to capped off as well?
@WickedZ315 жыл бұрын
They are looped.
@elhumildez31184 жыл бұрын
Where I can get deleted aluminum plates so I see ur and I like them I have @ 300zx 86 turbo and I want to do the same
@WickedZ314 жыл бұрын
Xenonzcar.com
@jokernasty3674 Жыл бұрын
How you idle with the icv delete? I heard it stalls alot or is there a way around it ? Sick build BTW
@WickedZ31 Жыл бұрын
Yeah just need to advance the timing and adjust the idle screw. Never had any stall issues
@jokernasty3674 Жыл бұрын
@@WickedZ31 cool thanks bro
@jeffbowman82655 жыл бұрын
Why would you delete the Wipers?!?
@WickedZ315 жыл бұрын
Because its a track car, and i use rainex.. weight reduction and makes the bay cleaner
@tommaddox10283 жыл бұрын
I would like you to do this once again. And***** explain what the hose does use a pointer on the lines to show the routing please go slowly in. I took of the charcoal filter out I don't what the function are. One small one goes into the fire wall ??? The other two I will block. And that mess of hoses between the fire wall rear of the manifold. I would like to remove I don't know there function.
@WickedZ31 Жыл бұрын
You don't need any of the vac lines in honesty. It's all for smog and emissions.
@victorbarra61452 жыл бұрын
Hey mate. Just wondering what you did for the turbo coolant lines. I see you blocked off with a bolt the hose that goes under the throttle body. Cheers
@WickedZ31 Жыл бұрын
No coolent lines, just the oil line.
@paulshamblin62605 жыл бұрын
Bought a used car. I think the coil got gone. What color wires am I look for? +-? I'm guessing the terminal cap is still in there. If not I guess I can splice in at the distributor.
@WickedZ314 жыл бұрын
Should just be a positive and negative. Not sure of the colors just test with volt meter.
@jovansolomon98716 жыл бұрын
Cool. After the deletes was it a turn operation? Did it idle fine after? Sorry to be a bother I've never done the deletes before I hear everything runs more efficiently after
@WickedZ316 жыл бұрын
Jovan Solomon runs a little rough cold, but after it warms up it's fine.
@jayjohnson30953 жыл бұрын
@@WickedZ31 would you like to puta stock turbo motor into a stock car 1987? my mechanic says i need a stock intercooler but its turbo motor from a turbo car that he took out and the new motor going in is also stock but it had lines near the oil filter and the other one doesn't
@7snalajmi2622 жыл бұрын
Hey there, what about if you want to install a vacuum gauge while you delete all vacuums line??
@7snalajmi2622 жыл бұрын
Also how can i install a fuel regulator??
@maxophone52183 жыл бұрын
Also if any how much hp did you get from it
@WickedZ31 Жыл бұрын
Was at about 210 hp or so
@crimsonhitman17193 жыл бұрын
Hey I’m in the process of starting to do this with mine is there any way you can make a list of just the names of the parts you mentioned you took of during this video so I don’t have to just just reply the video over and over 😂 if not it’s okay I can do that.
@WickedZ313 жыл бұрын
Any and all parts connected to any vacuume lines. Charcoal canister setup and anything else not really needed. Heater core, ac, brackets, useless bumper sensors, ac condenser, etc. Basically anything that has a vac line connected. Leave the vac line to the for. That's the only one you need
@galaxypegasis223 жыл бұрын
@@WickedZ31 wdym by the last part? What part does it only need to be connected to? Mine is stock and has lots of vacuum leaks and misfires just gone rip all of it out and see what happens.
@jdmlegends30092 жыл бұрын
My 84 Turbo stalls after start until warmed up. I have to depress the accelerator pedal and dump more fuel into the engine to keep it going. It'll run fine once warmed up, but it'll hesitate on occasion or stall at stop lights. The symptoms present represent those found with a bad IACV. Also, when the battery is connected, I hear a clicking sound coming from the IACV and if you place your finger on the cylinder part, you can feel a thump coming from it. I suspect the solenoid is failing to activate, so I was thinking about deleting mine as well. But, what did you do with the port coming off the air intake pipe to the throttle body and isn't it hard to start the car on cold days?
@shoemuncher7442 жыл бұрын
try cleaning your MAF sensor first, had the same problem and that was my culprit. then separate the connector on the IACV, if it's disconnected it will lock open and stay that way i believe. at least that's what it did for my 87,before i removed and blocked it off. if you choose at some point to remove your IACV remember to adjust your throttle body idle screw and reposition the tps. also for the nub on the intake pipe just head to any auto store and pick up a set of rubber caps that look like they'll fit.
@WickedZ31 Жыл бұрын
Never hard to start but with this car you couldn't touch the gas until it was warm or it bogged out.
@jdmlegends3009 Жыл бұрын
@@WickedZ31 Normally, I wouldn't since it's fuel injected but I need to give it the gas or it will stallwhen cold. Car has had a full tune up and I also had the CHTS and sub-harness replaced. However, the problem persists. Fuel filter was also replaced.
@7snalajmi2622 жыл бұрын
I have a z31 87 with big turbo but it is so trouble, it making miss fire alot and doesn’t start, did you prefer me to disconnect and delete that lines??
@WickedZ31 Жыл бұрын
It's up to you.. alot of the issues with these cars are due to vac leaks. If there are no vac lines then they can't leak lol
@chujeng80705 жыл бұрын
Question.. Are you running stock distributor? I have a 87 non turbo I erase pretty much the same stuff u did on ur but for sum reason i cant get it to run right... Car dies when i give it gas from pedal but wont die if i rev up manually from trottle body.. Thanx....
@WickedZ315 жыл бұрын
Mine floods if i touch the pedal when cold.. let it warm up to normal operating temp. Once its warmed up it shouldn't do that
@WickedZ315 жыл бұрын
Yes stock CAS / DIST
@WickedZ315 жыл бұрын
Everyone i know with the delets has the same issue. I believe it has to do with the cold start sensor delete and the delete of the items on the plenum
@chujeng80705 жыл бұрын
Cool thanx for ur help... Appreciated
@jonathanmontoya21365 жыл бұрын
What else did you get with that coil ?
@WickedZ315 жыл бұрын
just that, i need the control box when i do my ecu tune.
@WickedZ315 жыл бұрын
My coil was putting out bad voltage so I just purchased this for 40$ more then the OEM and its been working great! Also very easy to install.
@isaiahwyant34793 жыл бұрын
what model is that msd coil?
@WickedZ313 жыл бұрын
Blaster street fire
@GPXironczech6 жыл бұрын
I want to do some deletes but first off having problems with my 86 acceleration any info?
@GPXironczech6 жыл бұрын
Kenneth Finnell ok so I took my 86 to car wash and power washed underneath hood. Left car wash and car started to hesitate wouldn't let me rev past 2000. Took the connector off MAF sensor blew it out and hooked it all back up. Car ran perfectly like brand new for about a month then last week car started again with the hesitation upon giving car throttle. What can it be?
@WickedZ315 жыл бұрын
@@GPXironczech if your maf gets wet it will do that. If the car wont go over 2k its for sure the maf
@WickedZ315 жыл бұрын
Find me on Facebook messenger for direct help
@WickedZ315 жыл бұрын
@@GPXironczech most likely maff connection. If it gets wet or has moisture it gets fuckered till it dries. after connecting it wrap it with electrical tape it does help with keeping water and moisture out.
@GPXironczech5 жыл бұрын
Kenneth Finnell well the thing was after the wash car ran better than ever. Do you have an email? I dont have fb
@broken_z_boi62053 жыл бұрын
i know this is a 2 year old video but the msd coil, do I only need the coil or is there more to it
@WickedZ313 жыл бұрын
It just replaced the stock coil cause mine was bad. You can upgrade that by adding the msd box but it's not needed.
@broken_z_boi62053 жыл бұрын
Thanks so much, I didn’t totally expect an answer😂 My insta is @broken_z_boi if you’re interested at all
@thatmncarguy90113 жыл бұрын
@@WickedZ31 how do u know when the coil is shot?
@Kgio-21123 жыл бұрын
Where do you get the delete plates from?
@WickedZ313 жыл бұрын
Xenonzcar.com
@Kgio-21123 жыл бұрын
@@WickedZ31 thank you
@iqbalbanwait36713 жыл бұрын
Hey how do you have your blow off valve set up
@WickedZ313 жыл бұрын
Off the charge pipe. Was a welded flange or an aftermarket pipe. Was on there when I got it.
@FleetTech975 жыл бұрын
Don’t need heat in the car?
@WickedZ315 жыл бұрын
Nope, I drift in New Mexico in the summer.
@FleetTech975 жыл бұрын
Ahh gotcha man haha ya you don’t need heat for drifting. Looks sweet though! What else have you done to the car performance wise?
@salbravo47134 жыл бұрын
Can all these deletes be done to an Auto?
@WickedZ314 жыл бұрын
Yup!
@maxophone52183 жыл бұрын
Where can I buy those plugs or are they custom fabricated
@WickedZ31 Жыл бұрын
They are just vacuume line caps from auto zone.
@chrisberry3285 жыл бұрын
Did you delete your maf sensor and under the throttle body are the small vacuum lines plugged