Zaha Hadid Architects - Rhino Tutorial

No video

Zaha Hadid Architects - Rhino Tutorial

Рет қаралды 299,096

2 жыл бұрын

London Aquatics Centre (Zaha Hadid Architects) using Rhino 7 SUBD. Rhino architecture tutorial. Zaha Hadid Rhino tutorial. Rhino 3D Organic Modeling
Join this channel to download files
www.youtube.com/@adamarchh/join
Architects: ‪@ZahaHadidArchitects_official‬
Year: 2012
Area: 15950 m²
Manufacturers: KEIM, Kingspan Insulated Panels, Serge Ferrari
Location: London, United Kingdom
Archdaily: archdaily.com/161116/london-aquatics-centre-for-2012-summer-olympics-zaha-hadid-architects
Download the referance images: drive.google.com/drive/folder...
Zaha Hadid Architects: zaha-hadid.com
Contact us:
Instagram: AdamArchh
TikTok: AdamArchh
Pinterest: AdamArchh

Пікірлер: 170

@lukasz.7557 2 жыл бұрын

I have a tingling sensation that you may or may not, single-handedly save my architecture degree. Learnt so much new stuff from this single video. Keep it up

@AdamArchh 2 жыл бұрын

Glad to hear these. I will continue to share. Thank you.

@abderrahmanenachda1175 2 жыл бұрын

Nice work. I use always sketchup but with your videos its seems so easy to use rhino

@AdamArchh 2 жыл бұрын

Thank you. Abderrahmane

@iyogeshjha 2 жыл бұрын

Your video is very informative and unique. It helps to improve our designing skill . It's a request please also make video on how our design should be installed in real life example through animation. How the glass will be placed outside the building and how the supportive piller would hold on different angles

@AdamArchh 2 жыл бұрын

Thanks. There is an example video about it. I even made the model video. Project: Grotto Sauna Architects: Partisans Tutorial: kzfaq.info/get/bejne/Z52jmaxlqpnTh2g.html Video: kzfaq.info/get/bejne/rpx_qJOLus6bmZ8.html Achdaily: archdaily.com/574851/grotto-sauna-partisans

@JamStewAkuryou 2 жыл бұрын

This music is so calming and relaxing. This video is so full of useful tips and knowledge. Nice work. Great skills. I really enjoyed watching it.

@AdamArchh 2 жыл бұрын

Thanks for the nice comments.

@Gabriel.Ponce.De.Leon.777 5 ай бұрын

Congratulations for the music, very good taste.

@VidEOoSlOKOss Жыл бұрын

Que buen tutorial! Muchas gracias 👏🏻👏🏻👏🏻👏🏻👏🏻

@johnnyyue3814 2 жыл бұрын

Well done ! Actually we can use subd to create works like Zaha with consciousness.

@dohawork1404 2 жыл бұрын

Your videos is very very helpful Thanks a lot *-*

@AdamArchh 2 жыл бұрын

Glad you like them!

@umutt8053 2 жыл бұрын

Nice work

@salamayad8757 2 жыл бұрын

thanks, keep up the good work

@AdamArchh 2 жыл бұрын

Thank you Salam Ayad. We will always continue.

@umut576. 10 ай бұрын

Great job

@JS__99 2 жыл бұрын

Thank you a lot , I very liked your videos 🤩🤩🤩🤩🤩🤩

@AdamArchh 2 жыл бұрын

Thank you too.

@giovannamilanicaparroz1857 Жыл бұрын

really nice!!! congrats!

@AdamArchh Жыл бұрын

Thank you

@Beardedvillain841 2 жыл бұрын

Hi Adem, I like the videos your posting, so cool to work allong with it. It would be very usefull to also showcase the steps you make. This would make it more easier to follow your steps, especially for noobs like me ;p

@AdamArchh 2 жыл бұрын

Hi Mehmet, thank you. There is no sound in their first video. However, I recommend you to watch our latest videos. We voice all the stages in detail.

@vincentmeissner8193 2 жыл бұрын

Nice tutorial!

@AdamArchh 2 жыл бұрын

Thank you.

@berkanyuksel1997 Жыл бұрын

Zaha's Masterpieces of Archs🔥🔥🔥🔥

@andreipopoff2707 Жыл бұрын

Я восхищен!!!😍

@roaahafza1362 2 жыл бұрын

Thank you so much!!

@AdamArchh 2 жыл бұрын

Thank you too

@user-xp3ev2ix7l 2 жыл бұрын

عمل رائع جدا ،سلمت يداك

@AdamArchh 2 жыл бұрын

شكرا

@omidnejat8270 2 жыл бұрын

Hi Adam, it will be super helpful if you talk in the videos, sometimes it's a little hard to follow what tools you are using (the overall process would be more efficient if we hear your instructions), but thanks for the videos.

@AdamArchh 2 жыл бұрын

Thank you.

@arch_giovannimessina 2 жыл бұрын

So, thank you! Where is the reference images? From link get different image. Thank you again!

@AdamArchh 2 жыл бұрын

So sorry, Project link: www.archdaily.com/161116/london-aquatics-centre-for-2012-summer-olympics-zaha-hadid-architects

@ararena4075 2 жыл бұрын

Great Content

@AdamArchh 2 жыл бұрын

Thank you

@leiliasadykova5405 2 жыл бұрын

Hey, Thank you for the tutorial! My sbd shows in two different shades after mirroring, do you know why is that would that be happening? can't attach the image to show (

@AdamArchh 2 жыл бұрын

Hi thanks. If you want to show both faces the same color, right click on Reflect. But remember this. After pointing both sides in the same direction, the Reflect tool is now ineffective and you have to work with both sides separately.

@cairoreid346 2 жыл бұрын

at 3:05 the moment you clock on the first subd it highlights green and you are able to move control points throughout the surface independently. then I noticed that once the first subd was complete it resulted in a formal mass rather than extruded, i would definitely need help on that part for I am experimenting on my mac while im away fro the pc powerhouse. thanks!

@AdamArchh 2 жыл бұрын

Holding Ctrl+Shift click edge and then you can extrude by holding the dot on the gumball

@javierpiles5833 2 жыл бұрын

I was looking also help in this part. I'm gonna try. Thanks

@chengli9110 2 жыл бұрын

@@AdamArchh Luckily find this coment,Thank you so much!

@latibes 2 жыл бұрын

I modelled this building in Cinema 4D with full interior. Good job though.

@AdamArchh 2 жыл бұрын

Thanks and congratulations. Modeling this building in Cinema 3D is very difficult.

@shaiba7748 Жыл бұрын

could u send a link to download the already made rhino model for this

@alonsoj2968 2 жыл бұрын

El diseño original de la mariposa es de un arquitecto cubano y forma parte de la ciudad deportiva de Cuba que se contruyo antes de 1959, busquen la informacion y datos oportunos.

@AdamArchh 2 жыл бұрын

Gracias por la información.

@user-yw6he7qs2z Жыл бұрын

thanks for the video, I wanted to make these kinds of nurbs or double-curvature modeling to real model, but how do you unroll of unfold double curvature models or nurb models?

@AdamArchh Жыл бұрын

Try this, - kzfaq.info/get/bejne/q9OVireWzLfPeHU.html

@ronytarik5476 Жыл бұрын

شكرا جدا لحضرتك استفدت كتير من محاضرات حضرتك♥️ بس عندي مشكله ف بداية المحاضره دي ممكن اعرف لما ب create subD plane فالدقيقة 2:55 بيظهرلي اللاير باللون الاصفر وبضغط ctrl+shift وبعمل اكسترود وانا ماسكه الdots بيحرك البلان كله ولو ضغطت alt بيعمل كوبي للبلان كله مش زي ما حضرتك بتعمل ..ممكن اعرف اي المشكله لو سمحت ..مع العلم ان الedges والdots بتظهر لونها اصفر مش اخضر زي حضرتك ..!

@berniesbastardsdiansdemons9153 2 жыл бұрын

Hi how did u enable those moving arrows in blue and red.?

@AdamArchh 2 жыл бұрын

Hi Uati, Activate Gumball in the lower-middle part of the screen. This feature is only available in Rhino 6-7 versions.

@fatimahamid4320 2 жыл бұрын

Hi How do you make it all one mass in 5:20 and when I use sub plane the corner it's not rounder Can you help me please

@AdamArchh 2 жыл бұрын

Hello. If I understood you correctly. The command you should use should be remove crease.

@women8005 2 жыл бұрын

I very much aspire to become a famous and successful architect I love it💞💞💞💞

@AdamArchh 2 жыл бұрын

Of course you can if you work hard.

@women8005 2 жыл бұрын

@@AdamArchh waoo thank you so mach, I have a question please are you an architect?

@AdamArchh 2 жыл бұрын

I am an interior architect

@women8005 2 жыл бұрын

@@AdamArchh It's very interesting, I wish you success always

@hendriktara2922 2 жыл бұрын

Nice tutor

@AdamArchh 2 жыл бұрын

Thanh you

@ioanavalentina5214 Жыл бұрын

Great video, what enviroment map are you using here? Thank you

@AdamArchh Жыл бұрын

Thank you. (arches.png)

@nicolim3946 2 жыл бұрын

Hey Adam, I'm having problems splitting the glass and carriers with the subd roof. Do you know why this might happen? Did you explode the subd before splitting? Thanks for the video btw!

@AdamArchh 2 жыл бұрын

Hello, it means that they do not touch each other exactly. First create curves with intersection command between roof and carriers, then use these curves for split.

@nicolim3946 2 жыл бұрын

@@AdamArchh Thanks for the quick reply

@JS__99 2 жыл бұрын

🔥🔥🔥🔥👍🏻

@kurdmanrekani5763 2 жыл бұрын

Well done bro, is the software easy for using ? like sketchup

@AdamArchh 2 жыл бұрын

Hi Kurdman. It is an even easier program than Rhino SketchUp.

@kurdmanrekani5763 2 жыл бұрын

@@AdamArchh So Rhino easier than skp right ?

@AdamArchh 2 жыл бұрын

For me. Yes

@keliicenturion1505 Жыл бұрын

Is there a way to know what he is doing? I cant see most of the commands or hear anything. Are these tutorials for only for professionals?

@samimasum7297 2 жыл бұрын

Her hebi adem

@umutt8053 2 жыл бұрын

Selam Sami bey

@umut576. 2 жыл бұрын

Mükemmel bir iş

@mareknovotny74 10 ай бұрын

thx

@MG-yv1pw Жыл бұрын

Hi Adam, thanks for your helpful tutorial, i have question about those navigation that appears when you click on surface or points, how could i find it, it won't appear automatically for me.

@AdamArchh Жыл бұрын

Hi, enable the Gumball - rhinocentre.nl/wp-content/uploads/2017/11/Fig-46.png

@MG-yv1pw Жыл бұрын

@@AdamArchh thank you so much for your quick reply .your tutorial really helped me in my project I hope I could show you when it finish

@lynchen7912 2 жыл бұрын

I can't find subd in v6,did it had another way?

@AdamArchh 2 жыл бұрын

Hi Iyn, SubD can only be used with Rhino 7.

@natalyruiz1568 9 ай бұрын

How can I hide or eliminate the grid that appears on the curve shapes? I saw another videos of your channel and sometimes those grids doesn't appears

@AdamArchh 9 ай бұрын

Options - View - Display Modes - Shaded - Visibility - (Dissable) Show Isocurves

@thelyoness5467 2 жыл бұрын

When I try your step at 3:03 my shape does not create new cross lines with points for me to select. Do you know what I’m doing wrong?

@AdamArchh 2 жыл бұрын

Press and hold Ctrl+Shift to select an edge, then press and hold the middle point on the gumball to extrude.

@falancaonat3888 Жыл бұрын

@@AdamArchh Hello Adam, im new with Rhino. Ctrl+Shift works but when i extrude it shrinks back like elastic... What im doing wrong?

@aslidinarchitect Жыл бұрын

and there are courses

@junhaopam1629 2 жыл бұрын

How did you reflect the shape at 7:24?

@AdamArchh 2 жыл бұрын

Reflect SubD object. And select X or Y axis from command panel. I selected X axis on this tutorial. and 0 enter.

@ajinkyarandive 2 ай бұрын

There should be key pop up in corner to show what shortcuts you are using

@eduardtusha3045 2 жыл бұрын

What sofware you use?

@AdamArchh 2 жыл бұрын

Rhinoceros 3D, version is Rhino 7, tools are SubD tools.

@Akhiii_ 2 жыл бұрын

I dont think I caught the detail but how do you make it so the picture frame doesnt interfere with drag selections, I keep selecting the picture itself in attempt to drag selection i drag the picture itself, like for instance 3:36?

@AdamArchh 2 жыл бұрын

Hi, First select the image then use the Lock command

@Akhiii_ 2 жыл бұрын

@@AdamArchh Ah ok thank you! Appreciate the tutorials as well really helping me prepare for this coming upcoming semester of university

@AdamArchh 2 жыл бұрын

@@Akhiii_ Thank you

@imeshakalpani8399 2 жыл бұрын

Witch software did u use

@AdamArchh 2 жыл бұрын

Software name is Rhinoceros 3D. This version name is Rhino 7 SubD.

@tralanehaynes9725 2 жыл бұрын

How did you add the edge to the SubD plane at 3:03?

@AdamArchh 2 жыл бұрын

Hold Ctrl+Shift and select edge

@designerjuly2437 2 жыл бұрын

@@AdamArchh everytime you drag the edge, another edge appears, and you can change the direction of dragging, how did you do it? thank you

@AdamArchh 2 жыл бұрын

@@designerjuly2437 Hi, the tool you need to extrude the edges is to drag the middle point. If you drag the edges using the midpoints on the gumball it creates a new face.

@tungnguyenhuu4304 2 жыл бұрын

can you theo me how to creat elip in 2:57 , i just did it like you but only rectangle ??

@AdamArchh 2 жыл бұрын

Try press Tab key

@gaumaker 2 жыл бұрын

I am sorry, what is the name of the soft? Thank you.

@AdamArchh 2 жыл бұрын

Hi Artem, Software is Rhino 7, and tools are SubD

@gaumaker 2 жыл бұрын

@@AdamArchh thank you! Perhaps you can recommend me the soft to create Jewelry ? I’m full of ideas and going to learn to create CAD models of the jewelry.

@gaumaker 2 жыл бұрын

Fully inspired of Zaha’s creativity, Musk’s activity and I know I’ll find my boiling place between them

@archiamine5366 Жыл бұрын

In a minute 2.55 I did the same thing, but the result is a rectangle, not a semi-circular shape

@AdamArchh Жыл бұрын

Tab key

@brunolibano6513 6 ай бұрын

👏👏👏👏👏🙆

@pedrocastrorabadan7759 2 жыл бұрын

Is this possible with Rhinoceros 5?

@AdamArchh 2 жыл бұрын

For this method. To can not. But you can download T-spline plugin

@zlw3445 2 жыл бұрын

hi, when i followed you why cant i split it like you at 15:00, info:cant meet together

@AdamArchh 2 жыл бұрын

Hi. First select all windows and carriers (except the roof) then press the split command. Then select the roof and enter.

@kmntn7 Жыл бұрын

❤

@mohamedhassanebrahimmegahe5140 Жыл бұрын

when im doing the split order it show me an error says ''Split failed, objects may not intersect or intersections may not split object.'' what should i do ?

@AdamArchh Жыл бұрын

Hi, first use intersect command then split using these intersection lines

@arq.carlosleite2199 2 жыл бұрын

👏👏👏👊👊👍👍

@jouzou4645 Жыл бұрын

3:01 for my subd plane i cant choose only that 3 points insted it chooses the whole plane.any solutions?

@AdamArchh Жыл бұрын

Hold Ctrl Shift

@jouzou4645 Жыл бұрын

@@AdamArchh thanks a lot

@themiddle4084 2 жыл бұрын

5:50 what did you press show that new line

@AdamArchh 2 жыл бұрын

Right Click insert subd

@themiddle4084 2 жыл бұрын

@@AdamArchh can you tell why when i try to split the 2 objects, then it said "Split failed, objects may not intersect or intersections may not split object." then why i try to swap the objects, it can complete splitting but the main object become messy.

@faisalazamkhan3240 2 жыл бұрын

why dont you use paneling tool rather following this long steps for windows

@AdamArchh 2 жыл бұрын

Paneling Tools is not available in Rhino and some students are having trouble downloading and using it. So I tried to do all the work with Rhino.

@faisalazamkhan3240 2 жыл бұрын

@@AdamArchh thanks ,,please try some industrial or automobile details in sub d

@AdamArchh 2 жыл бұрын

@@faisalazamkhan3240 Thank you for your support.

@shanay9994 2 жыл бұрын

Nice tutorial sir, could you link up the music

@AdamArchh 2 жыл бұрын

I guess that's the music: - kzfaq.info/get/bejne/r8x7aNSD1KuvmY0.html&ab_channel=Musicoth%C3%A9rapie%26Relaxation

@shanay9994 2 жыл бұрын

@@AdamArchh thank you :)

@sondosnagib6808 Жыл бұрын

I don’t understand what you did in the beginning when you made a line over the scale at 0:37

@AdamArchh Жыл бұрын

I used the scale command; and rescaled it to 5000 cm.

@sondosnagib6808 Жыл бұрын

@@AdamArchh thank you i got it now♥️

@titusmaggy Жыл бұрын

How do you extract each panel shopdrawings?

@AdamArchh Жыл бұрын

Using Grasshopper

@titusmaggy Жыл бұрын

@@AdamArchh Can you make the video for it?

@silviad2451 2 жыл бұрын

it is possible only with rhino 7?

@AdamArchh 2 жыл бұрын

Yes, Possible.

@silviad2451 2 жыл бұрын

@@AdamArchh so, isn’t possible with old version of software (5-6….etc) thank you!

@bettyadanna512 2 жыл бұрын

What software were you using

@AdamArchh 2 жыл бұрын

Rhinoceros 3D

@bettyadanna512 2 жыл бұрын

Ok, thanks Adam

@AbaasMohammed 2 жыл бұрын

Programe name plz

@AdamArchh 2 жыл бұрын

Rhinoceros 3D

@user-zy7ly5nv2z Жыл бұрын

How to use this dot in 3:02(in video)?

@AdamArchh Жыл бұрын

Use the gumball to extrude - Number 13 in this image - docs.mcneel.com/rhino/6/help/en-us/image/topic_illustrations/gumball-001.png

@suchandrabanerjee1231 Жыл бұрын

@@AdamArchh But that dot doesn't appear and I'm not able to extrude the sub d object keeps moving around.

@sofainemahaidine7275 2 жыл бұрын

Achievements of Arab Zaha Hadid, the first female engineer in the world, may God have mercy on me

@user-sl7jt7df9t 2 жыл бұрын

اذا تلاحضين مخلاللج قلب عبرك

@valentincastelo6798 2 жыл бұрын

i wish she knew how to speak english. would be nice to hear instructions

@uthiransartroom3132 2 ай бұрын

How to drag subd plane it's not working for me... It's working only in xaxis

@AdamArchh 2 ай бұрын

In this link you can see Rhino's Gumball tool. With number 1 you can move objects freely in any viewport. - docs.mcneel.com/rhino/5/help/en-us/image/topic_illustrations/gumball-001.png

@eddyvelasquez431 2 жыл бұрын

I can't elongate the subD plane

@AdamArchh 2 жыл бұрын

Hi Eddy. First select a surface or edge by holding down Ctrl+Shift. Then grab and shoot the signs in Gumball. If you pull the arrow it will move. If you hold the small dot in the middle, it will extrude.