Legends watching vedio one day before exam 😂😂

You taught us the things in 10 mins which our teacher failed to do in six months. Thanks & Keep up the good work sir😍

Thank you so much sir for bringing out such a content in short span . It really saves our time a lot plus it gives concept clearance 😊

Before the advent of youtube, students were facing difficulty in solving problems in the books since not all problems has solutions and no alternatives solution discussed. People that time relying on other sources. But lucky to new generations for keeping up with youtubers discussing effectively, cleary with many varieties of sample problems and answers.

Thank you so much.. I watched many other NODAL ANALYSIS viedos but couldn't understand... But this was crystal with proper reason... Thank you❤

I have my exam after 2 hours and you solved my problem in just few mins, thanks🤝🏻😌

Loads of love sir 🤗.. u r far better than any else teacher.

The way you explaining the concept is awesome,and this helps us to understand the concept very easily without any difficulty

If anyone gets confused by the signage, just think of it as you are always doing va - v1, but if v1 is a negative voltage va - - v1 == va + v1. Hope this helps.

This is actually the greatest channel to teach

I'm from kenya,I really enjoy your how you make difficult concepts clear,,,I'm really greatful

The best & the easiest possible way to explain KCL!❤ Thanks sir!

I haven't seen that technique yet in my classes. Thanks, professor Khan! Really, I would give you two thumbs up if I could.

Sir understood the concept fully now. Thank you sir and hope your channel will grow soon.

This video explained it best. I couldn't understand other videos. Good job👍

I'm in Class 12.... still i use nodal analysis in place of Kirchoffs loop rule....Loved itt

Its easy and understandable, thank you so much!

Very good... Explanation... Loving it 🔥🔥

best lecture on youtube regarding kcl.... thanks sir!

I have my exam next week and did full chapter 1 numerical revision by watch your kvl kcl mesh and node videos thanks ❤

Actually I am from sri lanka, ur vedios are great very clear. (Indian and sri lankan syllabus are quite same)

Legends watching the video morning of their exam😏

I LOVE YOUR TECHNIQUE. THANK YOU FOR THIS. IMPREGNATE ME

Thank you sir for giving information about nodal anlysis

Ur teaching tchnique is amazing Keep going!!!

JazakAllahu khair sir for these videos 💯 May Allah bless u with millions of subscribers💯

I really appreciate your time and I enjoyed all lessons note. Asalam

Very nice video sir, thank you!

Dude, I was struggling through electrical engineering for like 6 months and you solved all my problems in like a matter of few minutes lmao xD thanks!

Thanku so much Sir 🙏❤️😍😘🥰 Perfectly explaining for us.

Great explanation sir.. I understood very clearly..👍

Thank you sir ....i really appreciate ur kind efforts... 🙏

Really such a great lecture sir!! Thank you so much, what i couldnt understand in whole 2 months of college , i got it in 9 mins today 😂❤️

Thank you sir for this wonderful video all concepts cleared :)

I will never forget it the way you taught me

See honestly ! I would not say that its something i had seen first time , but yes , good explanation in short period of time❤

Education from youtube is better than paid education from school. Thanks Sir for such a nice explanation

Mashallah, good explanation 🙂

I know damn well even if i give up hope on everything, there will be gems like this man to help us even in the last moment😌. This also a wake up call for me. I should study better

Great freaking video man! Thanks!

Legends watching 1hour before exam😂

Thank you ❤️

being a class 10 student kcl and kvl was a very difficult topic for me to understand but thank you so much for this video all doubts are cleared now !!!

great videos as KVL one.. loved it... thanks

Today is my exAm thank you sir😂😅

Yes Sir I watched this one

Thanks alot very clear nd clean.. very basic nd impt video.. please do more videos

I watched all your videos in the same morning of the exam.... it is really helpful

I'm watching 2 hours before my exam....lol 😆 🤣 😂 FINAL EXAM

What is the determinant method? How to use that to find the node voltages?

I like your way of teaching. Thank you sir

Grt, u tald us some 1-2 Pont tht not written in the book or never say by the teacher, so thank you u do a grt job.. 👍👍

anna super node, super mesh when u will explain?? Pls explain it very soon annaa

At node VB , there's an incoming current from VA and two outgoing currents towards 3ohm & 4ohm. Why you didn't used I input = I output, and instead sum them all. ??

Experience teacher teaching like this...❤❤❤❤

Underrated explanation even i watcher after 5 years

You deserved❤️❤️

Ultra pro Max legends are watching to clear there back in third sem which they got in first sem 😂😂😭😭 Back cleared 🥳🥳

Thank you so much for explaining in a very easiest way👍☺️

Thank you so much sir mera doubt clear karne ke liye. Mai apna doubt clear karne ke liye kaam se kaam 15-20 video dekhe but doubt clear nhi ho pa rha tha..🙏

Ultra legends watching this vedio before 1 hour of exam 😂😂😂

Legends watching this video 1 hour before exam 😂

Excellent explanation sir veray level anthey😊

Great explanation ❤️🙏

Thank you so much sir your tricks is very important for us❤

Thank you brother I’m watching 20min before my exam

You got a new subscriber. Thank U Vary much

you out here saving lives b4 exams

Thank you a lot sir , for good explanation

Thank you so much sir I really understood now.

Everything is good continue helping us

A useful video, thx for helping

Best video on kcl 🗿♥️

great video! thanks

sir how to calculate VA = in 1st equation will you tell me shortly how ,from where should i understand... plz rerply

Thank you so much for a great lecture

Thank u...all that i can I have noone near me...to learn. But U r there..best of luck

Thank you sir. My concept is clear.

Underrated lecture.

Superb explanation .. 👍

You are a legend sir 😎

Excellent video Khan sir.

This is really helpful

Thanks sir it helped me a lot👍😊

Simply superb....

Thank you for saving my grades :'))

thank you for well explanation

can't thank you enough!!

Very much understanding vdo❤️

Such a good explanation

Good Explanation............................Thanks...

Thank u very much I am understood very well

Best tutorial ever🙏

Thanks sir for your explanation s

Super explaination sir 💯

Blessings from India

Awesome mind-blowing Wowwwwww😳♥️

Sir,a little bit of concern regarding the first example where you write I1+I2+I3 and simply put the current values in terms of their ratio of potential and respective resistor attached to them ,I2 has the value of (VA+1)/4 there should be negative sign attached to I2 otherwise the answer doesn't match because here the biasing is in reverse direction for 1V... isn't it so?

Four months, sir can't thought me. But you thought me in 10 minutes. Take love from Bangladesh.

hey great video! small query: if youve asdigned positive direction to all the currents flowing away from node , shouldnt u assign negative value to current flowing towards the node Vb? bcs current is flowing from Va to Vb so (Vb-Va/2) should be on RHS of equation for K.C.L at node Vb? plrase clear this query and confirm if Im correct. thnx